Please show me your OEC or OMB in their solitaire settings!

[TruLuv858]

Hey All- if you are following my journey at all you know I am on the hunt for a 4 carat OEC or OMB… I am working with Adam at OWD and traveling to NYC on 10/05 so my DH and I can see his collection- I’m legit counting the sleeps, lol!

I currently have a 2.5 ct OMB in a halo setting. While beautiful, I’ve outgrown the design and now long for a bigger Solitaire- I will be trading in this diamond to help fund the upgrade . I plan on getting a stone in the M-P range, heck, it could be an ST?! My thought process is getting a platinum head/gallery and Gold Shank. If it’s a more yellow-ish/warmer diamond I plan to embrace it and set it in all Yellow gold. I would LOVE to see your solitaire settings- and any creativity you may have added. I am of the camp- NO DIAMONDS anywhere this time around, as I want the main stone to be on stage and, I’m also coming from a fully encrusted ring- kind of over it.

Thank you for sharing and if you have a link to other posts about this please share- I couldn’t find anything with this specific request?

TIA!

 

[elizat]

I don't think there is thread for 4 carat and up old cuts that are solitaires.

I found this, but not exactly what you are seeking:

Show me your large (5+ carat) diamonds! Bonus points for antique cuts

Hello all! I’m trying to make up my mind on a size for a custom cut antique cushion. I know when you get into the larger sizes the difference in visual size per carat is smaller, so I would love to see examples from those of you who have stones in the 4-5+ carat range! I am going back and forth...

www.pricescope.com

 

[elizat]

And @Cerulean has her really fantastic new reset as a solitaire, in a similar range of size you are considering.

#JOTW - A new sun in orbit! 3.5 S-T SI1 old mine cut from Old World Diamonds

She looks gorgeous in her new mount! :love: I love the prongs. Only a few more days until she's back on your hand!

www.pricescope.com

And smaller than 4 carats, but the throwback post this week was an AV OEC in a solitaire.

#TBT - My 3.21ct AVR in Vatche

My beautiful ring is here! I enjoyed working with GOG thoroughly and will continue to harass them with my diamond needs. :cheeky: 3.21ct K SI1 August Vintage Round Width: 9.37mm Length: 9.34mm Depth: 6.26mm Table Percentage: 41.20% Depth Percentage: 67.00% Setting is 900 plat Size 6 (on...

www.pricescope.com

I didn't come up with a lot on a search. Maybe have a browse through the solitaire with plain band thread as well?

Let Me See Your Solitaire Engagement Ring WITH Your Plain We

I am looking at resetting my diamond next year and am interested in seeing hand shots of wedding sets with plain bands. I am absolutely smitten with my new BGD Blue and will get a plain solitaire setting for her. I will also get a diamond band also in a couple of years, but love the...

www.pricescope.com

@Mreader has a solitaire in the size you are seeking that is old cut.

#JOTW - My almost 4 carat Old Euro Diamond holy grail ring!!!!

Well I am over the moon! For my next bling project I started putting away funds for what I thought was going to be a diamond stud upgrade, but then I started thinking that if I were going to spend that amount of money, that I want to be able to SEE it, and that an even larger engagement ring is...

www.pricescope.com

And one more, but not dedicated to old cut solitaires. But lots of photos and different rings.

#JOTW - Show me your solitaires please!

My EC solitaire! @sprinklesparkles That emerald cut is gorgeous! What are the stats on it please? :kiss2:

www.pricescope.com

 

[TruLuv858]

And @Cerulean has her really fantastic new reset as a solitaire, in a similar range of size you are considering.

#JOTW - A new sun in orbit! 3.5 S-T SI1 old mine cut from Old World Diamonds

She looks gorgeous in her new mount! :love: I love the prongs. Only a few more days until she's back on your hand!

www.pricescope.com

And smaller than 4 carats, but the throwback post this week was an AV OEC in a solitaire.

#TBT - My 3.21ct AVR in Vatche

My beautiful ring is here! I enjoyed working with GOG thoroughly and will continue to harass them with my diamond needs. :cheeky: 3.21ct K SI1 August Vintage Round Width: 9.37mm Length: 9.34mm Depth: 6.26mm Table Percentage: 41.20% Depth Percentage: 67.00% Setting is 900 plat Size 6 (on...

www.pricescope.com

I didn't come up with a lot on a search. Maybe have a browse through the solitaire with plain band thread as well?

Let Me See Your Solitaire Engagement Ring WITH Your Plain We

I am looking at resetting my diamond next year and am interested in seeing hand shots of wedding sets with plain bands. I am absolutely smitten with my new BGD Blue and will get a plain solitaire setting for her. I will also get a diamond band also in a couple of years, but love the...

www.pricescope.com

@Mreader has a solitaire in the size you are seeking that is old cut.

#JOTW - My almost 4 carat Old Euro Diamond holy grail ring!!!!

Well I am over the moon! For my next bling project I started putting away funds for what I thought was going to be a diamond stud upgrade, but then I started thinking that if I were going to spend that amount of money, that I want to be able to SEE it, and that an even larger engagement ring is...

www.pricescope.com

And one more, but not dedicated to old cut solitaires. But lots of photos and different rings.

#JOTW - Show me your solitaires please!

My EC solitaire! @sprinklesparkles That emerald cut is gorgeous! What are the stats on it please? :kiss2:

www.pricescope.com

Thank you so much! My request may have been confusing, I am on the hunt for a stone that size, but want to see soliataire's for this type of cut in any size! Just want to get an idea of how to best make the Diamond appeat center stage! Really appreciate you taking the time to provide the links above!!

 

[tyty333]

Here is a non-specific thread on old cuts...you can pick your way through until someone posts their ring

Old Cut Lovers...... please sign in!

MRBs leave me cold ever since I discovered I love ECs back in the late 90s. My mum gave me her 1.8ct+ MRB in a temporary ring setting, and it remains unworn and unloved. I recently found a pendant setting that I like, so it will be re-purposed as a pendant eventually. I have seen and liked the...

www.pricescope.com

 

[Cerulean]

Wow this is so exciting! @elizat shared my main thread - it’s a 3.5 carat OMC in S-T color range. If you want a white looking stone, this color range is not for you IMO. It is obviously tinted but that’s what I like about it!

But Adam has some great big rocks in stock from what I can see on Instagram! I had my first setting made by him, and I knew it was going to be a temp setting so I had fun with the shank and gallery design.

The big things about my setting from CVB to note - I love that the gallery has details, but from the top, all you see is the diamond. And because the gallery is more open, I can truly see the stone from all angles which I didn’t get with a bezel with a closed gallery design. The craftsmanship is incredible too!
I’d definitely decide color and setting style once you pick your stone. If you pick an SI1 like I did with inclusions near the girdle, you’ll want to make sure it’s well protected with at least 8 prongs or a bezel.

Why don’t you share some settings you like? Once you’re in the ballpark of a solitaire, your stone is going to be the center stage!

 

[Cerulean]

Before - chunky bezel by OWD. The facets looked more contrasty, but the chunky bezel concealed the cushiony shape and the profile. It does LOOK a bit bigger tho!






After - 8 prongs, had her “snub” them so they weren’t sharp claws, by Caysie van bebber mount has a floral gallery which is my FAVE and tho it offers a bit less protection overall…so pleased with how the cushion shape is more evident, the diamond has more of a “glow” and I can really see the profile. It’s also set a little higher which I love






There’s no wrong answer - you have to decide what flatters your stone, blends with your style, and choose based on your lifestyle. A bezel will be the most carefree hands down, and there is something to be said for that even tho I adore my new prongy mount!

 

[Cerulean]

I looked at so many solitaire setting styles…but I focused on ones that made sense for a delicate girdle. I would’ve never put my stone in a mount with a very exposed girdle…

To me, the gallery is where you can really have fun!

Some ideas I can pass on!

 

[Cerulean]

Now…if I trusted my girdle to be exposed, I would’ve picked VC’s Adriana hands down. I just ogled this setting forever but knew it wasn’t safe for my stone…

Here it is with a 5 carat OMB

 

[TruLuv858]

@Cerulean!!! Thank you! I am saving some of these!!!

I am really drawn to the simplicity of the Crown in the gallery settings- and YES, totally agree, it will be much easier to determine how she should be "dressed" once I have her on hand! I am finding I don't want a huge donut this time around, I would prefer less of a gap between my engagement ring and band- and definitely a heftier shank this time around- probably 2.5-2.8ish, mine is a VERY THIN micropave 1.5mm, while the craftsmanship is incredible and I have never had a problem- I am annoyed that it never lines up properly with my bands- its gorgeous just not practical.

I am in the process of collecting all of the ideas! Given this will be a warmer diamond, I am thinking I want a Gold Shank, and depending on the stone itself either a platinum or gold gallery and prongs... I wear 2 Gold Cartier Love Bracelets on my left hand, and my watch is 2 tone... So I would love to embrace more gold this time around- it's really all I wear these days...the only platinum pieces I have now is my current wedding set.

Also- I am so glad you mentioned Adam's bench, I was curious about their work...I don't think they do anything hand forged, correct? All CAD/Cast? I've had my last 2 settings done by BE's bench and they were both hand forged, and I am considering using DK for this project, although the convenience of just leaving it with Adam is so nice- the less the diamond has to travel the better!

Thank you again!

 

[elizat]

I had a setting done by OWD. It was not a solitaire but it was a three stone. I have since reset it and I don't even know where the setting is anymore. That's another story though. However, the setting was well done, it had a nice weight to it, and had nice finishing. I believe that he only does cad and cast. I felt the price was very fair for the work.

ETA: my old setting from OWD

View this content on Instagram

View this content on Instagram

 

[TruLuv858]

I had a setting done by OWD. It was not a solitaire but it was a three stone. I have since reset it and I don't even know where the setting is anymore. That's another story though. However, the setting was well done, it had a nice weight to it, and had nice finishing. I believe that he only does cad and cast. I felt the price was very fair for the work.

ETA: my old setting from OWD

View this content on Instagram

View this content on Instagram

Gorgeous stones!! And thank you for sharing your experience!

 

[Kim N]

I love all the settings you've saved, Cerulean! Do you happen to know the link to this one? I've been scrolling through her IG and can't find it.

 

[TruLuv858]

@Cerulean I LOVE one of the ones you have posted!! This is what I’m leaning towards… All Gold shank, with either a platinum or gold gallery- stone dependent. Wondering who I should approach for this solitaire project? And would Hand Forged be a better option? Obviously, OWD, DK and maybe BE? I have no clue price wise what gold settings like this are going for, so I should probably conduct my due diligence and reach out to these vendors and just ask…

I don’t want it set too low, or have a wide donut, so I would narrow that portion a bit, and think I want a Cathedral setting allowing the shank to meet up towards the crown.

 

[Cerulean]

I love all the settings you've saved, Cerulean! Do you happen to know the link to this one? I've been scrolling through her IG and can't find it.

View this content on Instagram

View this content on Instagram

 

[Cerulean]

@Cerulean!!! Thank you! I am saving some of these!!!

I am really drawn to the simplicity of the Crown in the gallery settings- and YES, totally agree, it will be much easier to determine how she should be "dressed" once I have her on hand! I am finding I don't want a huge donut this time around, I would prefer less of a gap between my engagement ring and band- and definitely a heftier shank this time around- probably 2.5-2.8ish, mine is a VERY THIN micropave 1.5mm, while the craftsmanship is incredible and I have never had a problem- I am annoyed that it never lines up properly with my bands- its gorgeous just not practical.

I am in the process of collecting all of the ideas! Given this will be a warmer diamond, I am thinking I want a Gold Shank, and depending on the stone itself either a platinum or gold gallery and prongs... I wear 2 Gold Cartier Love Bracelets on my left hand, and my watch is 2 tone... So I would love to embrace more gold this time around- it's really all I wear these days...the only platinum pieces I have now is my current wedding set.

Also- I am so glad you mentioned Adam's bench, I was curious about their work...I don't think they do anything hand forged, correct? All CAD/Cast? I've had my last 2 settings done by BE's bench and they were both hand forged, and I am considering using DK for this project, although the convenience of just leaving it with Adam is so nice- the less the diamond has to travel the better!

Thank you again!

I went with a 3mm shank that tapers - so it has heft but looks delicate from above.

If it helps visualize - my bezel ring from OWD was a 2.5mm shank. I prefer the 3mm

I also prefer a smaller gap - I found the larger gap uncomfortable…especially with a larger stone

Only CAD from Adam as far as I know, but he may have more than 1 bench. The bench work on my ring from him is solid, but I do think Caysie’s bench is better and it’s more refined. I also did a lot of the design with Adam, but had something specific in mind…but I found it much less stressful working with Caysie because I didn’t really have to control design elements.

For this reason I don’t plan to work with DK again - unless it’s a very very simple piece - just my 2 cents

 

[Cerulean]

@Cerulean I LOVE one of the ones you have posted!! This is what I’m leaning towards… All Gold shank, with either a platinum or gold gallery- stone dependent. Wondering who I should approach for this solitaire project? And would Hand Forged be a better option? Obviously, OWD, DK and maybe BE? I have no clue price wise what gold settings like this are going for, so I should probably conduct my due diligence and reach out to these vendors and just ask…

I don’t want it set too low, or have a wide donut, so I would narrow that portion a bit, and think I want a Cathedral setting allowing the shank to meet up towards the crown.

Adams bench I believe made this stunning ring - it’s crown like, and gracefully hugs the stone - and I love the engraving!!!

https://www.pricescope.com/communit...s-m-from-oldworlddiamonds.234272/post-4217058

 

[LightBright]

I had a setting done by OWD. It was not a solitaire but it was a three stone. I have since reset it and I don't even know where the setting is anymore. That's another story though. However, the setting was well done, it had a nice weight to it, and had nice finishing. I believe that he only does cad and cast. I felt the price was very fair for the work.

ETA: my old setting from OWD

View this content on Instagram

View this content on Instagram

OWD does fabulous settings once again! I love your three stone ring AND your new yellow gold prong setting so much! Thanks for sharing.

 

[LightBright]

Adams bench I believe made this stunning ring - it’s crown like, and gracefully hugs the stone - and I love the engraving!!!

https://www.pricescope.com/communit...s-m-from-oldworlddiamonds.234272/post-4217058

One of my favorite rings on PS.

 

[LightBright]

I’m sorry if this inspirational setting has already been posted, not sure. It really shows the beauty of a white metal basket and yellow gold shank. This is a much admired ring for me (solitaire setting and antique diamond).

#JOTW - My 3.55 OEC in ERD RG/WG solitaire

Hey there! :wavey: I have been holding out on posting this because I plan to get the head rhodium plated, but it seems like I am having trouble parting with the ring long enough to do that. :lol: I can't contain it anymore!!! I must share. Without going into too much detail, I will say...

www.pricescope.com

 

[lulu_ma]

@bright ice 's OEC is one of my favorite rings from OWD. It's definitely more elaborate than what you are looking for, but looks like beautiful workmanship.

OLD WORLD DIAMONDS on Instagram: "Excited to ship this beautiful custom ring to one of my long time OWD client/friends. If you think the video looks awesome, you should see it in person. Swipe for some progress pics. Enjoy it P!"

523 likes, 19 comments - oldworlddiamonds on December 13, 2021: "Excited to ship this beautiful custom ring to one of my long time OWD client/friends. If you think the video looks awesome, you should see it in person. Swipe for some progress pics. Enjoy it P!".

www.instagram.com

 

[Kim N]

View this content on Instagram

View this content on Instagram

Thank you!

 

[LightBright]

@bright ice 's OEC is one of my favorite rings from OWD. It's definitely more elaborate than what you are looking for, but looks like beautiful workmanship.

OLD WORLD DIAMONDS on Instagram: "Excited to ship this beautiful custom ring to one of my long time OWD client/friends. If you think the video looks awesome, you should see it in person. Swipe for some progress pics. Enjoy it P!"

523 likes, 19 comments - oldworlddiamonds on December 13, 2021: "Excited to ship this beautiful custom ring to one of my long time OWD client/friends. If you think the video looks awesome, you should see it in person. Swipe for some progress pics. Enjoy it P!".

www.instagram.com

Such a beauty! …And the setting was done by Old World Diamond’s bench, custom designed per her ideas. So well done, I think Adam’s bench is excellent.

Note page three of the following thread shows inspiration setting from David Klass Jewelry which is also beautifully done yellow gold base with white metal prongs.

My Quintessential Ravishing OEC

She’s 4.93 ct Q-R VS1. I fell in love with her the moment Adam posted it on IG. I tried to forget about it and move on being content with my MRB but I couldn’t stop thinking about it. I decided that if I at least saw it in person that I could put it to rest. I kept it for 5 days, sent it back...

www.pricescope.com

 

[TruLuv858]

Such a beauty! …And the setting was done by Old World Diamond’s bench, custom designed per her ideas. So well done, I think Adam’s bench is excellent.

Note page three of the following thread shows inspiration setting from David Klass Jewelry which is also beautifully done yellow gold base with white metal prongs.

My Quintessential Ravishing OEC

She’s 4.93 ct Q-R VS1. I fell in love with her the moment Adam posted it on IG. I tried to forget about it and move on being content with my MRB but I couldn’t stop thinking about it. I decided that if I at least saw it in person that I could put it to rest. I kept it for 5 days, sent it back...

www.pricescope.com

Thank you so much! I’ve decided that if I want to move forward with the simple crown solitaire setting, I will use Adam’s bench for sure, if the stone calls for something more elaborate, I’ve already reached it to DK for a quote! So I’m in good hands! And DK’s quote was very reasonable!

 

[TruLuv858]

Such a beauty! …And the setting was done by Old World Diamond’s bench, custom designed per her ideas. So well done, I think Adam’s bench is excellent.

Note page three of the following thread shows inspiration setting from David Klass Jewelry which is also beautifully done yellow gold base with white metal prongs.

My Quintessential Ravishing OEC

She’s 4.93 ct Q-R VS1. I fell in love with her the moment Adam posted it on IG. I tried to forget about it and move on being content with my MRB but I couldn’t stop thinking about it. I decided that if I at least saw it in person that I could put it to rest. I kept it for 5 days, sent it back...

www.pricescope.com

So helpful!! And making me re-think QR’s?!!! I thought OP would be my limit for an OEC. I don’t seem to kind the warmth in OMB as much as OEC’s but WOW this QR is sooo bright!!! Love!