Tiffany setting replica and donut height

[Klee_Bee]

Hi everyone, I hope this is the right section! I tried to do my best, not being a native English speaker ! I wanted to ask for your help because we are looking for a solitaire ring as similar as possible to the Tiffany setting. I already own a LGD solitaire purchased on James Allen, the six prong knife edge, but the head is too squatty (as you can see from the first two images). I would like a ring (for our anniversary) with a higher profile, like the Tiffany setting. I read that the Vatche u113 is similar but I'm not very due to the thickness of the band . I found the London knife edge solitaire from By Bonnie Jewelry (an example in the other two photos) but I find that the prices of LGD rings are higher than those of other sites such as Whiteflash or James Allen. Can you advise us? Thank you!

 

[tyty333]

Hi everyone, I hope this is the right section! I tried to do my best, not being a native English speaker ! I wanted to ask for your help because we are looking for a solitaire ring as similar as possible to the Tiffany setting. I already own a LGD solitaire purchased on James Allen, the six prong knife edge, but the head is too squatty (as you can see from the first two images). I would like a ring (for our anniversary) with a higher profile, like the Tiffany setting. I read that the Vatche u113 is similar but I'm not very due to the thickness of the band . I found the London knife edge solitaire from By Bonnie Jewelry (an example in the other two photos) but I find that the prices of LGD rings are higher than those of other sites such as Whiteflash or James Allen. Can you advise us? Thank you!

Can you explain this sentence...I think you left a word out so its a little confusing.

Do you like everything about the JA setting but the height of the stone (it does look squatty)? If so, you could go with that but ask the
stone be set medium (vs low like you got) and send pictures that show what you mean by "medium".

Whiteflash has dont several of the Vatche u113 settings for Pricescopers. I think its a lovely setting.

 

[Klee__]

“ I read that the Vatche u113 is similar but I'm not very convinced due to the thickness of the band” sorry i missed a word! xD thank you for the advice. Yes, I like everything except the fact that the head is stubby, but now I don't trust myself to buy it again on JA. I saw that Whiteflash stones have really good prices and very good quality, I will look for more images of the Vatche u113 to see if it can be for me

 

[tyty333]

Dont know what to tell you because most people on Pricescope who have done the research say that the U-113 is the closest.
Whiteflash has a few designs that are similar to the Tiffany. Did you see them?

Elegant Classic Solitaire Engagement Ring | 3581

Add a touch of sophistication with the Elegant Classic Solitaire Engagement Ring. Shop now at Whiteflash and celebrate your everlasting love. | 3581

www.whiteflash.com

Exquisite Half Round Solitaire Engagement Ring | 3585

Elevate your style with the Exquisite Half Round Solitaire Engagement Ring. Discover this captivating ring at Whiteflash and let your love story sparkle. | 3585

www.whiteflash.com

Contemporary Classic Solitaire Engagement Ring | 1416

Contemporary Classic Solitaire Engagement Ring. A ring that combines timeless elegance with a contemporary touch. | 1416

www.whiteflash.com

 

[Klee_Bee]

Dont know what to tell you because most people on Pricescope who have done the research say that the U-113 is the closest.
Whiteflash has a few designs that are similar to the Tiffany. Did you see them?

Elegant Classic Solitaire Engagement Ring | 3581

Add a touch of sophistication with the Elegant Classic Solitaire Engagement Ring. Shop now at Whiteflash and celebrate your everlasting love. | 3581

www.whiteflash.com

Exquisite Half Round Solitaire Engagement Ring | 3585

Elevate your style with the Exquisite Half Round Solitaire Engagement Ring. Discover this captivating ring at Whiteflash and let your love story sparkle. | 3585

www.whiteflash.com

Contemporary Classic Solitaire Engagement Ring | 1416

Contemporary Classic Solitaire Engagement Ring. A ring that combines timeless elegance with a contemporary touch. | 1416

www.whiteflash.com

Thanks, I'll take a look

 

[princessk]

I actually love the lower set stone with JA. Will you be selling your present setting. I’m not sure of your stone size but I may be interested. Thank you.

 

[Klee_Bee]

I actually love the lower set stone with JA. Will you be selling your present setting. I’m not sure of your stone size but I may be interested. Thank you.

thank you for your appreciation. Unfortunately it is not for sale because it has great sentimental value, but thank you for the proposal!

 

[Jax172]

Why not have it custom made? Try David Klass

 

[Klee_Bee]

Why not have it custom made? Try David Klass

Tahnks! where can I find him? I'm from Italy and I don't know if he ships internationally. While looking on the forum I saw the splendid u113 ring of @Tonks and I saw that the WF SA listened to her requests to customize the setting and did a splendid job!

 

[Jax172]

Tahnks! where can I find him? I'm from Italy and I don't know if he ships internationally. While looking on the forum I saw the splendid u113 ring of @Tonks and I saw that the WF SA listened to her requests to customize the setting and did a splendid job!

Login • Instagram

Welcome back to Instagram. Sign in to check out what your friends, family & interests have been capturing & sharing around the world.

www.instagram.com

 

[Tonks]

Hey! If you’re going for a Tiffany replica you really cannot do better than the Vatche U113. I would have zero concerns about width. If you’re looking at measurements online and freaked out about width, remember that it’s a knife edge. It looks much visually thinner than the measurements would suggest.

I looked at Tiffany and tried on their six prong setting (one of my threads has photos), and while there might be slight differences between that one and the U113, they are *extremely* slight. I didn’t really customize my setting—I just specified stone height and how I wanted the prongs finished.

Good luck!

 

[Klee_Bee]

Login • Instagram

Welcome back to Instagram. Sign in to check out what your friends, family & interests have been capturing & sharing around the world.

www.instagram.com

Thanks!

 

[greenteabiscuit]

I have not seen a setting close to T&Co yet. Vatche u113 may be close for maybe 1ct stone size 6 ring ish. When carat size goes up, T&co seemed to adjust the width, height of the basket, donut and band to maintain the aesthetics. Vatche and others do not. They merely fit a larger basket on the unmodified band.

 

[Klee_Bee]

I have not seen a setting close to T&Co yet. Vatche u113 may be close for maybe 1ct stone size 6 ring ish. When carat size goes up, T&co seemed to adjust the width, height of the basket, donut and band to maintain the aesthetics. Vatche and others do not. They merely fit a larger basket on the unmodified band.

Thank you! this is exactly what happened with my JA. I was reading on Whiteflash that they also make custom settings, so maybe starting from the Vatche you can get to something similar to the Tiffany setting.

 

[Alybetter]

Here are some cads of two I’ve had done recently. And some photos. David Klass.

Tiffany 6 prong repro by David Klass

Dropping in to share this repro I just had made by DK. Hoping it’ll be potentially helpful for someone in the future. As helpful as the many Tiffany replica threads have been to me. Adding some photos, it’s a 1 carat in the platinum setting. If I had it to do over again, I’d have a taller donut...

www.pricescope.com

Your donut looks pretty low. Some original Tiffany settings have that low of a donut once you get into larger carat sizes. I’d ask for a re-make if you’re not satisfied though.

 

[Klee_Bee]

Here are some cads of two I’ve had done recently. And some photos. David Klass.

Tiffany 6 prong repro by David Klass

Dropping in to share this repro I just had made by DK. Hoping it’ll be potentially helpful for someone in the future. As helpful as the many Tiffany replica threads have been to me. Adding some photos, it’s a 1 carat in the platinum setting. If I had it to do over again, I’d have a taller donut...

www.pricescope.com

Your donut looks pretty low. Some original Tiffany settings have that low of a donut once you get into larger carat sizes. I’d ask for a re-make if you’re not satisfied though.

Thanks for the cads! I’ll take a look. Unfortunately I couldn't ask for a re-make because I often already had problems with italian FedEx and I didn't trust to send it back

 

[Alybetter]

I have not seen a setting close to T&Co yet. Vatche u113 may be close for maybe 1ct stone size 6 ring ish. When carat size goes up, T&co seemed to adjust the width, height of the basket, donut and band to maintain the aesthetics. Vatche and others do not. They merely fit a larger basket on the unmodified band.

I honestly think DK’s work is more like the OG Tiffany setting than the Vatche. I almost went with the Vatche when I bought my diamonds from Whiteflash. Seeing the finished product made me happy I went with David.

 

[Tonks]

Here’s my 4.2 carat Vatche U113 (left) next to a 3 carat Tiffany I (right), if it helps.
I will look to see if I have a comparison from other angles, but as someone who has tried on a larger Tiffany 6 prong and owns a larger U113, I would tell you they are virtually indistinguishable. A Tiffany SA thought I had a Tiffany ring.

 

[Klee_Bee]

Here’s my 4.2 carat Vatche U113 (left) next to a 3 carat Tiffany I (right), if it helps.
I will look to see if I have a comparison from other angles, but as someone who has tried on a larger Tiffany 6 prong and owns a larger U113, I would tell you they are virtually indistinguishable. A Tiffany SA thought I had a Tiffany ring.

Thank you!! I read your post with the story of your ring and it's beautiful... I really think I'll choose the vatche u113 as soon as I have the chance!

 

[Lschneids01]

Hello. I purchased my 2.75ct lab grown round brilliant diamond in a 6 prong 14k white gold solitaire setting in December. I bought the whole package from Dreamstone. They are based out of NYC and FL. But I made custom changes to their six prong classic solitaire ring in 14k white gold for $550 and they did not charge me extra either. The ring comes in platinum 18k white and gold silver as well. I will post a few pictures of mine. It maybe slightly different from Tiffany’s but on their website they have a custom ring that looks exactly like the Tiff one now they will create for you. I worked with Ethan and he emailed me back and forth the entire process sending videos and I sent pictures of what I wanted.

 

[LTCT814]

Hello. I purchased my 2.75ct lab grown round brilliant diamond in a 6 prong 14k white gold solitaire setting in December. I bought the whole package from Dreamstone. They are based out of NYC and FL. But I made custom changes to their six prong classic solitaire ring in 14k white gold for $550 and they did not charge me extra either. The ring comes in platinum 18k white and gold silver as well. I will post a few pictures of mine. It maybe slightly different from Tiffany’s but on their website they have a custom ring that looks exactly like the Tiff one now they will create for you. I worked with Ethan and he emailed me back and forth the entire process sending videos and I sent pictures of what I wanted.

The ring is absolutely beautiful on your hand! The size and proportions are perfect!

 

[Lschneids01]

The ring is absolutely beautiful on your hand! The size and proportions are perfect!

Thank you very much! I appreciate it. Yes I sure do love it and enjoying it still.