Find your diamond
Find your jewelry
shape
carat
color
clarity

Do diamonds turn brown?

IMG_1009.PNG

Any chemists here to verify?
 
In your last pics the prongs look white but the diamond is definitely brown. I hope we find out what the cause is. And for what it's worth- I also do not like very small diamonds because even a touch leaves them dirty and lacking sparkle.
 
atp223 said:
WHAT!? What was the outcome of that??
Click to expand...
They replaced it with a comparable stone and setting. They had previously done an appraisal of the ring, so they knew what they had lost. The replacement diamond is supposedly a H&A cut, but it doesn't have the sparkle and fire that my other diamond had. The other diamond was an upgrade that I got when married to my ex. I didn't wear it for a long time because I'd remarried. Then I had the great idea of resetting it into a RHR, so I bought a used setting from someone here. Losing it didn't upset me too terribly much as long as the jewelry store replaced it (win-win situation). They gave me a setting that was as good or better than the one they lost, although the original solitaire setting wasn't replaced.
 
LisaRN said:
In your last pics the prongs look white but the diamond is definitely brown. I hope we find out what the cause is. And for what it's worth- I also do not like very small diamonds because even a touch leaves them dirty and lacking sparkle.
Click to expand...
I think your setting was the one I bought for my 1.5 diamond reset. I still have the three stone band but haven't set anything in it yet.
 
the_mother_thing said:
I wonder if something (e.g. chemical) could have hit the YG and caused (what I think is) the ‘stain’ in the area of & under that diamond ... think a liquid running down into & under the setting for that diamond. Could be, you washed your hands after it happened and didn't realize it & that one spot just didn't get cleaned as well to remove 'whatever'. I am just hypothesizing ... either way, I believe it will require the diamond being removed & examined to tell for sure.
Click to expand...
Generally, I remove the ring and hold it in my teeth while I wash my hands. I'm old and occasionally have a lapse (hence the reason I hold it between my teeth) and forget to remove it from my finger before getting my hands wet to wash them, but that's rare because I rarely even wear the ring. I only wear it on special occasions.
 
:confused2:I'd be going nuts trying to figure this out. Have you tried rubbing it with a little acetone on a q-tip?
 
Ilovecarbon said:
Ok so the reason I (and presumably everyone else) asked if it was clean was because diamonds aren’t terribly reactive towards things. In fact, from a chemistry perspective we have to trick carbon in to reacting if it already has all of its bonds and spoiler alert it usually does. You kind of have to trick it in to not having the bonds in the first place. It’s a very special element and the reason we all can exist. [I’m not ilovecarbon because of diamonds, but because of organic chemistry]
Click to expand...
I'm a med tech in a hospital lab, so I had to take organic too, albeit back in the early '70s.

There is an idea in science that usually the simplest answer is the correct one, meaning the one that makes the fewest assumptions is usually the correct answer. So in all likelihood there are 3 possibilities: A) your diamond has something persnickety on it B) the metal underneath your diamond has reacted or C) that’s not a diamond. A and B are the most likely. C would be weird considering you purchased it from a very reputable establishment.
Click to expand...
In medicine they say, "If you hear hoofbeats, it's probably horses and not zebras," or something like that.

I assure you, I wasn’t trying to be obnoxious when I asked if it was clean, it’s just the most likely problem, especially if the substance leaked below the diamond itself.
Click to expand...
That's the thing. Yes, it's most likely a foreign substance that became deposited beneath one diamond in a melee and turned the stone amber. But just how likely is that to happen?? Probably as likely as having a diamond change colors. ha! I will get to the bottom of this if it's the last thing I do!!

Edit: grammar and clarity => wine ya’ll
Click to expand...
I love wine. My daughter is an assistant winemaker at Aubert Winery in the Napa Valley. Visiting her is so much fun!!
 
Luce said:
:confused2:I'd be going nuts trying to figure this out. Have you tried rubbing it with a little acetone on a q-tip?
Click to expand...
No, I'm afraid to do that. I think I'll just let the jeweler remove it and solve the mystery once and for all.
 
Random thought... but it couldn't have become irradiated, could it?

(Seems unlikely!)
 
Have you tried nail polish remover on a q-tip? That would be my recommendation.
 
doberman said:
Have you tried nail polish remover on a q-tip? That would be my recommendation.
Click to expand...

whitewave said:
Did these other spilled over parts come out? It sounds like it from what you describe.
Click to expand...
As long as this is not vintage and does not contain copper in the allloy..acetone is a good idea. Its a good organic solvent. You might first try rubbing alcohol (soak). If its still brown, then clean with water and try acetone.

Can't wait to hear what the jeweler finds under high power microscope. But, a simple acid bath might be just the trick and was often my grandmother's tool for such stubborn stuff.

I would recommend you just leave the ring on during handwashing (but not during use of hand sanitizer). Then, dry the ring. I slightly push my rings up and then dry underneath them. I'd worry that if you drop the ring from the height of your mouth, you could increase the risk of chipping that gorgeous sapphire.
 
indigoblue said:
Generally, I remove the ring and hold it in my teeth while I wash my hands. I'm old and occasionally have a lapse (hence the reason I hold it between my teeth) and forget to remove it from my finger before getting my hands wet to wash them, but that's rare because I rarely even wear the ring. I only wear it on special occasions.
Click to expand...

I screwed a small cup hook on the cabinets next to my bathroom and kitchen sink. I put my rings there when I wash my hands or rinse a dish. They keep my rings safe and are very convenient.
 
LisaRN said:
I screwed a small cup hook on the cabinets next to my bathroom and kitchen sink. I put my rings there when I wash my hands or rinse a dish. They keep my rings safe and are very convenient.
Click to expand...
The ring-in-the-teeth trick is only done #1 when I'm wearing it (rarely) and #2 must use a public restroom. My rings come off as soon as I get home. They go immediately into a jewelry tray or into their secret hiding place. The ONLY thing I wear at home is an 18k WG wedding band.
 
Do you think it could be rust?
 
Lovinggems said:
Do you think it could be rust?
Click to expand...
Do you mean could a flake of rust have gotten under the stone or that this ring is rusting? If the latter, only iron and steel can "rust." All precious metals can corrode from a bunch of chemicals in sufficient quantity and exposure -- though its not called rust. Rust is a special term used only for alloys that contain iron.

Your welcome from a pedantic scientist. :cool2:
{forgive me...its been a long week already}
 
@indigoblue your ring is beautiful! The setting is so strikingly complimenary to your sapphire. Whatever is causing this melee’s discoloration I hope is rectified by your jeweler. Good luck.
 
rockysalamander said:
Do you mean could a flake of rust have gotten under the stone or that this ring is rusting? If the latter, only iron and steel can "rust." All precious metals can corrode from a bunch of chemicals in sufficient quantity and exposure -- though its not called rust. Rust is a special term used only for alloys that contain iron.

Your welcome from a pedantic scientist. :cool2:
{forgive me...its been a long week already}
Click to expand...

That’s fine. Not a problem, you’re welcome.
So could this be corrosion?
 
To answer the question in the headline, no, diamonds do not turn brown. This is a cleaning task. Sometimes that can be difficult and, as mentioned several times above, sapphires can be slightly persnickety with the most aggressive cleaning methods, like fire and certain strong acids. Show it to a pro. This isn't that hard but it does require a bit of attention to avoid damaging either the sapphire or yourself.
 
This mystery is so intriguing! Seems only way is for jeweller to remove the orange diamond and clean underneath. Please keep us updated coz I’m keen to know what the results are...:think:
 
If you're a medic, iodine for sterilisation? I got orange discolouration to my YG wedding ring after an repeated iodine prep.
 
gm89uk said:
If you're a medic, iodine for sterilisation? I got orange discolouration to my YG wedding ring after an repeated iodine prep.
Click to expand...
I don't wear this ring to work. The last time I wore it was to my 50 year high school reunion two months ago.

And I even got the nerve to try cleaning it with acetone, but it didn't help.

My jeweler removed the diamond and said that there was some gunk on it and under it. He has thoroughly cleaned everything, and I'll pick it up tomorrow.

Thanks for all of your suggestions and comments. It was indeed some gunk under one teeny tiny diamond melee. How it got there, I'll never know.
 
That's great that you have finally found out the cause. It is a truly beautiful ring and needs to be worn and enjoyed!
 
Pleased this has been resolved for you - hope you find yourself reaching for it more often.
 
Glad the issue has been resolved! :appl: I hope you find yourself wearing it more often, it is a really beautiful ring.
 
The best possible news! Yay.
 
Glad to hear you have some resolution & peace of mind. Hopefully you come back with pictures of it all gussied up after you pick it up! :appl:
 
You must log in or register to reply here.
GET 3 FREE HCA RESULTS JOIN THE FORUM. ASK FOR HELP
Jewelry Blog
PriceScope-Concierge-Ad
Find prime cuts.
Top