Old mine style cushions or Antique style cushion search
- Thread starter furs
- Start date
- Joined
- Apr 2, 2015
- Messages
- 2,339
furs said:
Now that you're narrowing down what you like (and since you know the size and color you're after) have you asked any of the suggested vendors to source a stone for you? They will have access to many stones you won't see posted or online.
I had a long discussion with Mark at brilliantly engaged. He was great so far. He mentioned that a lot of stones are overseas at a show in Hong Kong right now but was going to try to present some to me in a couple weeks.
I also contacted a few other folks mentioned on this forum but when you apply the criteria that I have, few have even a single stone that meets the discription.
From looking at that 101 cushion post though I feel that the 8 facet cut might be my best bet. It is sort of in between the chunky and small facet look. Do folks agree that it's a less risky pick (as in more people find it appealing) than the antique or old mine cuts?
I also contacted a few other folks mentioned on this forum but when you apply the criteria that I have, few have even a single stone that meets the discription.
From looking at that 101 cushion post though I feel that the 8 facet cut might be my best bet. It is sort of in between the chunky and small facet look. Do folks agree that it's a less risky pick (as in more people find it appealing) than the antique or old mine cuts?
Gypsy
Super_Ideal_Rock
- Joined
- Aug 8, 2005
- Messages
- 40,225
No. Keep your options open. I have seen some recently cut 4 mains that have kicked serious tale. Not at all crushed ice. And I've compared them side by side to above average 8 mains and the four main kicked serious butt.
You have just enough knowledge to be dangerous right now.
Work with Mark. He's great.
Read these four threads, please. They will help you.
[URL='https://www.pricescope.com/community/threads/e-ring-search-30k.218669/page-3']https://www.pricescope.com/community/threads/e-ring-search-30k.218669/page-3[/URL]
[URL='https://www.pricescope.com/community/threads/cushion-cuts-decision-time.220199/']https://www.pricescope.com/community/threads/cushion-cuts-decision-time.220199/[/URL]
First this one (study the information and follow the links I post)
[URL='https://www.pricescope.com/community/threads/new-and-looking-for-help-choosing-cushion-cut-diamond-to-oz.205195/']https://www.pricescope.com/community/threads/new-and-looking-for-help-choosing-cushion-cut-diamond-to-oz.205195/[/URL]
And then this one:
[URL='https://www.pricescope.com/community/threads/help-need-opinions-about-this-cushion-cut-diamond-pics.206771/']https://www.pricescope.com/community/threads/help-need-opinions-about-this-cushion-cut-diamond-pics.206771/[/URL]
Okay?
You have just enough knowledge to be dangerous right now.
Work with Mark. He's great.
Read these four threads, please. They will help you.
[URL='https://www.pricescope.com/community/threads/e-ring-search-30k.218669/page-3']https://www.pricescope.com/community/threads/e-ring-search-30k.218669/page-3[/URL]
[URL='https://www.pricescope.com/community/threads/cushion-cuts-decision-time.220199/']https://www.pricescope.com/community/threads/cushion-cuts-decision-time.220199/[/URL]
First this one (study the information and follow the links I post)
[URL='https://www.pricescope.com/community/threads/new-and-looking-for-help-choosing-cushion-cut-diamond-to-oz.205195/']https://www.pricescope.com/community/threads/new-and-looking-for-help-choosing-cushion-cut-diamond-to-oz.205195/[/URL]
And then this one:
[URL='https://www.pricescope.com/community/threads/help-need-opinions-about-this-cushion-cut-diamond-pics.206771/']https://www.pricescope.com/community/threads/help-need-opinions-about-this-cushion-cut-diamond-pics.206771/[/URL]
Okay?
Gypsy,
You are a wealth of knowledge. I've reviewed the posts you suggested and am now a bit more knowledgeable. I am inclined to find the best eye clean F cushion I can.
I think I might need to go to 2.5 carats or so to get what I want do to limited supply in the 2.5+ range, and high costs. This would like bring my size closer to 7.75mm. I'm also willing to sacrifice on the rectangular shape requirement.
The other thing I can do is step down to a G SI1 (eye clean) and get something closer to 3 carats, i'm okay to do this, but only if the G is white looking (I've seen some that are quite yellow), and only if the SI1 is truly eye clean.
You are a wealth of knowledge. I've reviewed the posts you suggested and am now a bit more knowledgeable. I am inclined to find the best eye clean F cushion I can.
I think I might need to go to 2.5 carats or so to get what I want do to limited supply in the 2.5+ range, and high costs. This would like bring my size closer to 7.75mm. I'm also willing to sacrifice on the rectangular shape requirement.
The other thing I can do is step down to a G SI1 (eye clean) and get something closer to 3 carats, i'm okay to do this, but only if the G is white looking (I've seen some that are quite yellow), and only if the SI1 is truly eye clean.
Veltiesmom
Shiny_Rock
- Joined
- Sep 18, 2015
- Messages
- 165
furs|1457026032|3999145 said:
A GIA G should NOT be yellow in the slightest.
I am more picky than most on color.
I said this same thing to a jeweler and although he doubted it, I was able to tell when the stones were below F in color. Maybe the two G diamonds I saw were more colored than most, but they were both GIA rated G.
I said this same thing to a jeweler and although he doubted it, I was able to tell when the stones were below F in color. Maybe the two G diamonds I saw were more colored than most, but they were both GIA rated G.
Sphene|1457028605|3999165 said:
I actually saw this 3.16 ct stone in person. Or at least I think I did. To be honest it didn't look ideal under the ASET, but I'm also a novice and it was at the start of my search and education. Can anyone comment on the cutting structure, it looks like 8 facet, but then there are some additional cuts in the center.
Gypsy what are your thoughts on this stone?
Gypsy,
Just so I have a better opportunity to learn from you, what about that stone is off putting. For me it was primarily that the it didn't meet my criteria for clarity and color, and from my memory was mediocre in ASET performance. From reading your other posts and to use some PS terminology this stone does seems a bit mushy in some areas.
Just so I have a better opportunity to learn from you, what about that stone is off putting. For me it was primarily that the it didn't meet my criteria for clarity and color, and from my memory was mediocre in ASET performance. From reading your other posts and to use some PS terminology this stone does seems a bit mushy in some areas.
Coming back to the stone listed below. Does anyone have any information on this cut pattern. It looks like an 8 main with an additional set of cuts where the cutlet would be. Is this a new style of cut? I have not seen any information on it.
http://www.jamesallen.com/loose-diamonds/cushion-cut/3.16-carat-g-color-si1-clarity-sku-583440
http://www.jamesallen.com/loose-diamonds/cushion-cut/3.16-carat-g-color-si1-clarity-sku-583440
I fully appreciate your input. I was just trying to better understand why it isn't ideal, I can tell that it appears a little flat in regards to light performance.
I would never have imagined that finding a stone in the 2.5-3ct range would be so difficult. I understand why so many folks go with a RB, proper cushions are indeed very hard to source. Although I could go with a custom cut AVC, I think I would rather just get something sooner. No point in making my gf wait much longer.
I would never have imagined that finding a stone in the 2.5-3ct range would be so difficult. I understand why so many folks go with a RB, proper cushions are indeed very hard to source. Although I could go with a custom cut AVC, I think I would rather just get something sooner. No point in making my gf wait much longer.
- Joined
- Jul 23, 2012
- Messages
- 20,046
Anything wrong with this?eta, I know original post says 2.7, but your last one says 2.5, and I think the .2 difference is really minimal in the long run, if everything else fits
http://www.jamesallen.com/loose-diamonds/cushion-cut/2.50-carat-f-color-vs2-clarity-sku-145410
http://www.jamesallen.com/loose-diamonds/cushion-cut/2.50-carat-f-color-vs2-clarity-sku-145410
- Joined
- Aug 29, 2014
- Messages
- 4,223
Still this one too
https://www.victorcanera.com/diamonds/qnt57k-2.470-e-si1-ideal-antique-cushion
Good spread at 7.89x7.84x5.46
https://www.victorcanera.com/diamonds/qnt57k-2.470-e-si1-ideal-antique-cushion
Good spread at 7.89x7.84x5.46
Admittedly I'm no expert on modern cushions but this could be an option - 3.01ct G-VS2 - $36,140. Not sure about the inclusions though:
http://www.jamesallen.com/loose-diamonds/cushion-cut/3.01-carat-g-color-vs2-clarity-sku-597856
Have you decided on antique vs. modern cut cushions? In this size, with your color and clarity requirements, you may have a wait a while for *the one* to turn up. I wouldn't recommend a custom AVC if you can't exchange it though. On the off chance that your fiancee doesn't like that cut, you'd be stuck.
http://www.jamesallen.com/loose-diamonds/cushion-cut/3.01-carat-g-color-vs2-clarity-sku-597856
Have you decided on antique vs. modern cut cushions? In this size, with your color and clarity requirements, you may have a wait a while for *the one* to turn up. I wouldn't recommend a custom AVC if you can't exchange it though. On the off chance that your fiancee doesn't like that cut, you'd be stuck.
- Joined
- Jul 23, 2012
- Messages
- 20,046
Niel|1457536475|4002040 said:
I'm not sure what setting she is after, but last I checked you could ask ja to get danhov. Either of these could be purchased on platinum and within your max 40 k budget
http://www.danhov.com/view-all-374/danhov-classico-single-shank-engagement-ring-cl141
http://www.danhov.com/view-all-374/danhov-classico-single-shank-engagement-ring-cl138
300x240.png)