Show Me Your Diamond Studs!

[Jax172]

Mine are 1.47 in total weight. Here is one of them. One is J color and one is I color. Not sure which this one is. They are from Brian Gavin.

 

[LissaB]

Hi Everyone
I have found a way to overcome DSS for good
I got second piercing that makes my main diamond studs pop!

I've been thinking about doing that too! Can you share the size of your main diamond studs and the baby diamond?

 

[H4happy]

I've been thinking about doing that too! Can you share the size of your main diamond studs and the baby diamond?

Hi dear
The baby diamonds are 0.08tcw and the main is 2.50tcw but quality of baby need to match the main

Still would suggest go a little bigger to 0.10 to 0.14tcw just for better sparkle

 

[munchee]

I posted ear picture of this stud but not a close up picture of itself.
2.1ctw F Si1 ACA in six prongs martini setting.

 

[Missie1]

Hi dear
The baby diamonds are 0.08tcw and the main is 2.50tcw but quality of baby need to match the main

Still would suggest go a little bigger to 0.10 to 0.14tcw just for better sparkle

Really beautiful. I would suggest going as high as .50 tcw and really giving a bling as your main studs are such a great size.

 

[LissaB]

Hi dear
The baby diamonds are 0.08tcw and the main is 2.50tcw but quality of baby need to match the main

Still would suggest go a little bigger to 0.10 to 0.14tcw just for better sparkle

Thank you for the info. Mine are 1.66 tcw. I have a few different size travel CZ studs to play around with. I will be like Goldilocks, need a set not too big, not too small, just right!

 

[Jax172]

Two more of my stud collection. Both from Lightbox. The bezels are 1.5 ctw and the others are 1 ctw

 

[donnabrsd]

These are for my daughter-in-law. 1.06ctw H VS1 ACAs in 18k custom crown settings...

 

[missy]

These are for my daughter-in-law. 1.06tcw H VS1 ACAs in 18k custom crown settings...

Gorgeous! Lucky daughter in law!

 

[Fabulous50]

These are for my daughter-in-law. 1.06ctw H VS1 ACAs in 18k custom crown settings...

Wow, beautiful!

 

[munchee]

These are for my daughter-in-law. 1.06ctw H VS1 ACAs in 18k custom crown settings...

So pretty!!!! I love the setting too! Beautiful setting!

 

[diamondseeker2006]

These are for my daughter-in-law. 1.06ctw H VS1 ACAs in 18k custom crown settings...

Wow, what a great mil you are!!! Beautiful!!!

 

[donnabrsd]

Gorgeous! Lucky daughter in law!

Thank you! I'm a lucky mother-in-law.

Wow, beautiful!

Thank you!

So pretty!!!! I love the setting too! Beautiful setting!

Thank you! They are a petite version of mine.

Wow, what a great mil you are!!! Beautiful!!!

Thank you! She's a wonderful daughter-in-law!

 

[RunningwithScissors]

These are for my daughter-in-law. 1.06ctw H VS1 ACAs in 18k custom crown settings...

Those are gorgeous! Very thoughtful gift.

Are those the same settings you shared with us a few weeks ago that are on your own studs? Really love these!

 

[donnabrsd]

Those are gorgeous! Very thoughtful gift.

Are those the same settings you shared with us a few weeks ago that are on your own studs? Really love these!

Yes, they are the same settings as my studs.

 

[jbake]

My new studs Great experience with Whiteflash, couldn’t have gone more smoothly! Both L color, SI1, ACAs. 1.635ctw, one .807ct the other .828ct

Stones in my rings are G color for comparison.

 

[MamaBee]

My new studs Great experience with Whiteflash, couldn’t have gone more smoothly! Both L color, SI1, ACAs. 1.635ctw, one .807ct the other .828ct

Stones in my rings are G color for comparison.

They’re gorgeous @jbake! I can’t believe they’re an L! They look so white! The size is so perfect for your ears too!

 

[jbake]

They’re gorgeous @jbake! I can’t believe they’re an L! They look so white! The size is so perfect for your ears too!

Thank you! When I saw them online, I hesitated a little! But Liza sent me a picture and put them on hold, the lower color and SI1 clarity made the price too hard to resist! I figured if I got them and the color bothered me it would be easy to upgrade a few colors, but I think I’m happy with these (until I’m ready for another size increase, haha!)
They are so pretty in person! I can see the color in some lighting more obviously than others. But when they’re in my ears, all I see are sparkles!

 

[Jax172]

My new studs Great experience with Whiteflash, couldn’t have gone more smoothly! Both L color, SI1, ACAs. 1.635ctw, one .807ct the other .828ct

Stones in my rings are G color for comparison.

OOOooo I love these and I am so excited to see L color studs. I just purchased some L color MMD studs and I was a tad apprehensive. Lower colors don't bother me usuallybut L will be the lowest I have gone in larger stones. Yours look amazing.

 

[jbake]

OOOooo I love these and I am so excited to see L color studs. I just purchased some L color MMD studs and I was a tad apprehensive. Lower colors don't bother me usuallybut L will be the lowest I have gone in larger stones. Yours look amazing.

Thank you, I’m really happy with these! I hope you love yours just as much!

 

[MamaBee]

Thank you! When I saw them online, I hesitated a little! But Liza sent me a picture and put them on hold, the lower color and SI1 clarity made the price too hard to resist! I figured if I got them and the color bothered me it would be easy to upgrade a few colors, but I think I’m happy with these (until I’m ready for another size increase, haha!)
They are so pretty in person! I can see the color in some lighting more obviously than others. But when they’re in my ears, all I see are sparkles!

I think they look perfect @jbake! I don’t see any color at all..just the sparkle!

 

[KristinTech]

My new studs Great experience with Whiteflash, couldn’t have gone more smoothly! Both L color, SI1, ACAs. 1.635ctw, one .807ct the other .828ct

Stones in my rings are G color for comparison.

@jbake - I watched these videos a few times—I thought they were beautiful! The rainbow flashes! I love them on your ears... so glad they’re with a PSer!

 

[heididdl]

Wow, what a great mil you are!!! Beautiful!!!

Gorgous . Once I get my new studs I will start saving for my daughter's fiancé 's studs. When she and Steph get married I will present her with a similar pair as you did. it is such a thoughtful gift and Im sure your daughter in law is through the moon for them

 

[jbake]

@jbake - I watched these videos a few times—I thought they were beautiful! The rainbow flashes! I love them on your ears... so glad they’re with a PSer!

Thank you! Once I saw them, I couldn’t stop thinking about them!

 

[Iola80]

Hi Everyone
I have found a way to overcome DSS for good
I got second piercing that makes my main diamond studs pop!

I'm going to have to try this because I suffer from DSS from time to time.

 

[Iola80]

My new studs Great experience with Whiteflash, couldn’t have gone more smoothly! Both L color, SI1, ACAs. 1.635ctw, one .807ct the other .828ct

Stones in my rings are G color for comparison.

Omg, these are so pretty

 

[WindyCitySparkle]

These are for my daughter-in-law. 1.06ctw H VS1 ACAs in 18k custom crown settings...

@donnabrsd, may I have your permission to use this as inspiration if I am working with WF on a pair of ACA studs too? They are beautiful and I love the flat back and crown profile.

 

[donnabrsd]

@donnabrsd, may I have your permission to use this as inspiration if I am working with WF on a pair of ACA studs too? They are beautiful and I love the flat back and crown profile.

@WindyCitySparkle Yes, I've let Vera know that I am fine with anyone using even the exact design. Hopefully they add it as a stock item soon. Look forward to seeing your new studs.

 

[WindyCitySparkle]

@WindyCitySparkle Yes, I've let Vera know that I am fine with anyone using even the exact design. Hopefully they add it as a stock item soon. Look forward to seeing your new studs.

I really appreciate that. Thank you.

 

[RunningwithScissors]

@WindyCitySparkle Yes, I've let Vera know that I am fine with anyone using even the exact design. Hopefully they add it as a stock item soon. Look forward to seeing your new studs.

I'm using your settings/CADs too! (But I gotta wait until the second half of May - its a budget thing )