I think I'm finally nearing end of my engagement ring search but I still need a little bit of help. Just to summarize - I thought I had found the perfect setting through Blue Nile, the eiros vine setting (http://www.bluenile.com/build-your-own-diamond-ring?forceStep=STYLE_STEP&offer_id=21299) and I asked for some advice in choosing a diamond here at PS. I hadn't quite picked a diamond yet when I found out that the setting was being discontinued soon but they still had some left in the right size. The next day, the diamond that I eventually settled on was no longer available and I panicked at the thought of losing out on the setting as well. With some good advice from some other posters (Thanks!) I didn't rush the search for another diamond. The original diamond became available again and I was about to purchase it but I hesitated and thought maybe I should make sure my girlfriend liked the setting. Turns out that was a good idea - she wasn't thrilled with the setting because the side diamonds made it too sparkly. We've looked at rings before so it wasn't anything out of the ordinary to show her a handful of rings to reestablish what she likes.
After this ordeal, I was at a loss for what to do. I couldn't find anything she liked (well.... and that was also reputable) so I started looking into custom rings. I contacted BGD about a quote becuase they seem to be very well liked by the people here and their work looks amazing. The bonus is that they also give a ton more information about their diamonds than Blue Nile! After thoroughly describing my idea, I got a quote back for the setting and diamond recommendations and everything fits into my budget! I was definitely relieved - I thought custom work would be much more expensive. I've attached a few pictures of the rings that inspired my idea and a rough sketch I drew of part of my idea.
So here is where I need some help - I was given 4 recommendations. All of them are from Brian Gavin's Signature H&A collection so they should all be excellent quality. I still actually have to choose one though and I could really use your help. I generally know what to look for in the stats but I don't really know what to look for in ASETs and Idealscope images. I've read about both but there's only so much you can get from articles.
Here are the diamonds. All the specs are listed at the links and all HCA scores are between 0.7 and 1.4 with excellent in every category except spread (very good). My main questions would be what are your opinions on the ASETs and ISs for each of these and which would you choose? I also have a few questions specific to each diamond listed below each link. Thank you for your help!
1 http://www.briangavindiamonds.com/d...ls/0.586-i-vs1-round-diamond-ags-104055878130
HCA - 0.7
I'm a little concerned that the HCA is so low but there are few inclusions and it's VS1 so they shouldn't be visible (and I can't find them).
2 http://www.briangavindiamonds.com/d...ls/0.580-g-vs2-round-diamond-ags-104055878103
HCA - 1.0
I'm a little worried about VS2 inclusions but otherwise I just don't know how to interpret this ASET or IS.
3 http://www.briangavindiamonds.com/d...ls/0.607-h-vs2-round-diamond-ags-104057888036
HCA - 1.4
The certificate says that additional clouds are not shown but I don't see anything in the actual diamond. Would this show up at all in the ASET or IS? This is a VS2 diamond so would the inclusions be visable? I can't find anything in the picture.
4 http://www.briangavindiamonds.com/d...ls/0.607-h-vs2-round-diamond-ags-104057888036
HCA - 1.4
All the inclusions are in the table but I can't see them at all in the provided picture. VS1 inclusions shouldn't be visible in their picutre and in person, correct? The certificate also says that additional clouds are not shown but, again, I don't see anything in the actual diamond.




After this ordeal, I was at a loss for what to do. I couldn't find anything she liked (well.... and that was also reputable) so I started looking into custom rings. I contacted BGD about a quote becuase they seem to be very well liked by the people here and their work looks amazing. The bonus is that they also give a ton more information about their diamonds than Blue Nile! After thoroughly describing my idea, I got a quote back for the setting and diamond recommendations and everything fits into my budget! I was definitely relieved - I thought custom work would be much more expensive. I've attached a few pictures of the rings that inspired my idea and a rough sketch I drew of part of my idea.
So here is where I need some help - I was given 4 recommendations. All of them are from Brian Gavin's Signature H&A collection so they should all be excellent quality. I still actually have to choose one though and I could really use your help. I generally know what to look for in the stats but I don't really know what to look for in ASETs and Idealscope images. I've read about both but there's only so much you can get from articles.
Here are the diamonds. All the specs are listed at the links and all HCA scores are between 0.7 and 1.4 with excellent in every category except spread (very good). My main questions would be what are your opinions on the ASETs and ISs for each of these and which would you choose? I also have a few questions specific to each diamond listed below each link. Thank you for your help!
1 http://www.briangavindiamonds.com/d...ls/0.586-i-vs1-round-diamond-ags-104055878130
HCA - 0.7
I'm a little concerned that the HCA is so low but there are few inclusions and it's VS1 so they shouldn't be visible (and I can't find them).
2 http://www.briangavindiamonds.com/d...ls/0.580-g-vs2-round-diamond-ags-104055878103
HCA - 1.0
I'm a little worried about VS2 inclusions but otherwise I just don't know how to interpret this ASET or IS.
3 http://www.briangavindiamonds.com/d...ls/0.607-h-vs2-round-diamond-ags-104057888036
HCA - 1.4
The certificate says that additional clouds are not shown but I don't see anything in the actual diamond. Would this show up at all in the ASET or IS? This is a VS2 diamond so would the inclusions be visable? I can't find anything in the picture.
4 http://www.briangavindiamonds.com/d...ls/0.607-h-vs2-round-diamond-ags-104057888036
HCA - 1.4
All the inclusions are in the table but I can't see them at all in the provided picture. VS1 inclusions shouldn't be visible in their picutre and in person, correct? The certificate also says that additional clouds are not shown but, again, I don't see anything in the actual diamond.



