urasia
Rough_Rock
- Joined
- Oct 6, 2014
- Messages
- 70
Re: Help! Need opinions about this cushion cut diamond *PICS
Yes! Thanks Gypsy, something along those lines but with a finer flat band (I'm thinking flat tapered band rather than round) and the prongs going through the inside of the diamond collar and set a little lower under the girdle than those ones. I also want to have the prongs set on the sides of the stone rather than on the corners as they are usually held.
Do you think any of these vendors would be able to custom something like that? Also if I get the diamond from one vendor can I send it to another to be set?
Gypsy|1414115367|3771899 said:Have ERD make the setting if you go customer
They have a VERY VERY good bench. Don't get it made in AUS. Almost all our Aussie members deeply lament the use of Australian jewelers and usually end up using US jewelers instead.
You want a diamond collar around the stone with a plain solitaire.
So do you want it like this one? http://www.dvatche.com/index.php?page=collection&search=caroline%20&id=53 (obviously made for a cushion)
Because if this is what you want, Vatche makes it, and GOG carries it. But ERD can get it too. So either stone vendor could get you want you want.
There's also this one (personal favorite): http://www.loveaffairdiamonds.com/the-julia-solitaire/ (made for a cushion).
Yes! Thanks Gypsy, something along those lines but with a finer flat band (I'm thinking flat tapered band rather than round) and the prongs going through the inside of the diamond collar and set a little lower under the girdle than those ones. I also want to have the prongs set on the sides of the stone rather than on the corners as they are usually held.
Do you think any of these vendors would be able to custom something like that? Also if I get the diamond from one vendor can I send it to another to be set?