Find your diamond
Find your jewelry
shape
carat
color
clarity

Opinions on engagement diamond

I

iamjona

Rough_Rock
Joined
Apr 21, 2018
Messages
6
Hi all,

New here. Thinking of pulling the trigger on the following stone... has an HCA rating of .7... All excellent, except for the spread being very good...

GIA Report

1.71 carat
H color
VVS1 clarity
Triple excellent
No Fluor
Depth: 62.1%
Table: 56%
Crown Angle: 34
Crown Height: 15%
Pavilion Angle: 40.6
Pavilion Depth: 42.5
Star Length: 50%
Lower Half: 80%
Girdle: Slightly Thick, Faceted, 4.5%
Cutlet: None

Priced at $14,000

Thoughts?

Much appreciated, everyone.
 
The pavillion is deeper than we recommend. I think you'd find that the stone is not as pretty when looked at closely than from afar. But, can you get an ASET or IS image for this?

Something like this has a better balance of angles. You can put this on hold, if you like it, and ask the JA rep to request an IS (idealscope) image.
https://www.jamesallen.com/loose-di...h-color-vs1-clarity-excellent-cut-sku-4632202

Or a super-ideal like this, which is over budget but we can look for others.
https://www.whiteflash.com/loose-diamonds/round-cut-loose-diamond-3858601.htm
 
rockysalamander said:
The pavillion is deeper than we recommend. I think you'd find that the stone is not as pretty when looked at closely than from afar. But, can you get an ASET or IS image for this?

Something like this has a better balance of angles. You can put this on hold, if you like it, and ask the JA rep to request an IS (idealscope) image.
https://www.jamesallen.com/loose-di...h-color-vs1-clarity-excellent-cut-sku-4632202

Or a super-ideal like this, which is over budget but we can look for others.
https://www.whiteflash.com/loose-diamonds/round-cut-loose-diamond-3858601.htm
Click to expand...

Pavilion depth or angle? What’s recommended?
 
1) Look at GIA XXX or AGS 000 only

2) Use these parameters.
depth - 60 - 62.5%
table - 54- 57.5% (up to 58% with a good CA/PA pairing)
crown angle - 34- 34.5 degrees
pavilion angle - 40.6- 40.8 degrees
girdle - thin to slightly thick, thin to medium, etc (avoid very thin or thick)
polish and symmetry - very good and above
Lower Girdle Facets - 75-80 (though I like closer to 75 when given the choice)

3) You can run the stone through the HCA tool (https://www.pricescope.com/tools/hca). This is an elimination tool. You eliminate anything over 2.0. What's left, is worth pursuing an IS or ASET image to look at light return. If the numbers are well in the middle of the above ranges, and the photo/video look good, a IS or ASET may be 100% needed.

***We can look for options for you too. We may post some that don't meet these exact numbers or stay within the HCA. Don't despair or eliminate them out of hand. We are often more experienced at looking at the videos and seeing how the stone performs.:mrgreen2:
 
rockysalamander said:
1) Look at GIA XXX or AGS 000 only

2) Use these parameters.
depth - 60 - 62.5%
table - 54- 57.5% (up to 58% with a good CA/PA pairing)
crown angle - 34- 34.5 degrees
pavilion angle - 40.6- 40.8 degrees
girdle - thin to slightly thick, thin to medium, etc (avoid very thin or thick)
polish and symmetry - very good and above
Lower Girdle Facets - 75-80 (though I like closer to 75 when given the choice)

3) You can run the stone through the HCA tool (https://www.pricescope.com/tools/hca). This is an elimination tool. You eliminate anything over 2.0. What's left, is worth pursuing an IS or ASET image to look at light return. If the numbers are well in the middle of the above ranges, and the photo/video look good, a IS or ASET may be 100% needed.

***We can look for options for you too. We may post some that don't meet these exact numbers or stay within the HCA. Don't despair or eliminate them out of hand. We are often more experienced at looking at the videos and seeing how the stone performs.:mrgreen2:
Click to expand...

If I’m not mistaken, all my stone’s values are within your stated parameters?
 
Ack. You are correct. Apologies. :oops2:

What are the inclusions from the cert? What does it say in comments?
 
3A4B0DAD-0B62-4DF5-9090-ADAB24CEA101.png
rockysalamander said:
Ack. You are correct. Apologies. :oops2:

What are the inclusions from the cert? What does it say in comments?
Click to expand...

No worries! Here’s the characteristics image. Pinpoint, cloud, feather. There are no comments and no black inclusions even under 40x.
 
Looks great! Do you have a setting selected?
 
Sleep easy. You did great. Post pics when you get it!
 
Hi Iam, the diamond looks great! No worries with the VG for spread on the HCA, this is the usual score for most other than shallower diamonds.

You have nothing to worry about, no concerns from us, be happy and congratulations on a super purchase!
 
Good catch! Congrats on this diamond, I'm sure it's a very well performing one under a different lighting..
iamjona said:
Hi all,

New here. Thinking of pulling the trigger on the following stone... has an HCA rating of .7... All excellent, except for the spread being very good...

GIA Report

1.71 carat
H color
VVS1 clarity
Triple excellent
No Fluor
Depth: 62.1%
Table: 56%
Crown Angle: 34
Crown Height: 15%
Pavilion Angle: 40.6
Pavilion Depth: 42.5
Star Length: 50%
Lower Half: 80%
Girdle: Slightly Thick, Faceted, 4.5%
Cutlet: None

Priced at $14,000

Thoughts?

Much appreciated, everyone.
Click to expand...
 
You must log in or register to reply here.
GET 3 FREE HCA RESULTS JOIN THE FORUM. ASK FOR HELP
Jewelry Blog
PriceScope-Concierge-Ad
Find prime cuts.
Top