shape
carat
color
clarity

Obsessed with this design, need help with specs

ruby24red

Rough_Rock
Joined
May 13, 2012
Messages
20
Ok, I need this setting in my life. How wide do you think the shank is? How big is the center? What size halo diamonds on top and around the side? How tall do you think it is?
Thanks so much for your help!Screenshot_2018-01-07-20-29-19.pngScreenshot_2018-01-07-19-21-22.pngScreenshot_2018-01-08-22-32-58.png
 

Attachments

  • Screenshot_2018-01-07-20-29-19.png
    Screenshot_2018-01-07-20-29-19.png
    598.4 KB · Views: 22
  • Screenshot_2018-01-07-19-21-22.png
    Screenshot_2018-01-07-19-21-22.png
    574.5 KB · Views: 8
  • Screenshot_2018-01-07-19-21-22.png
    Screenshot_2018-01-07-19-21-22.png
    574.5 KB · Views: 7
I’d say the center diamond which is an OEC (? The table looks high in the first pic) is around 1 carat ie around 6mm. It looks like it has .03/ .05 melee around. Those under the basket top look slightly larger ? The total height seems very high in my opinion, maybe as much as 1 cm or 10mm off the band. Plus more .03 plus ish on the sides of the band. It’s hard without knowing the finger size it’s on.
 
That is a gorgeous ring! I am no expert but I have to say it does look very high off the band.
 
Do you have a top down view?
 
I don't have any other views. I just found it while googling. And it's a really old post, so I can't contact the op.
 
Here's a top view OP posted in another WB thread. My guess would be around 1-1.2ctw center on a 3mm shank. 8-10mm to top of the stone. I'm trying to remember which designer had these "lace" settings. They were popular some time ago on PS. You may try to search for "lace setting" in old PS threads.
Picture_005.jpg
 
Michael b sounds about right but now that I looked at his site again, this ring looks nothing like what's there.

Which design elements of this ring do you like? The WB thread is few years old so that particular settings may not be in production anymore. PSers are really good at recommendations;)2
 
I love the height, the thicker band, the halo and the basket. The only thing I might change would be the diamonds on the band.
 
Anyone?
 
It's going to get knocked around and caught on everything. Keep that in mind. It's very high.
 
Maybe look at falling edge settings?
 
I didn't find anything more about the setting on WB either. It's basically a non cathedral halo with a vertical halo or 'scarf'. I would contact David Klass for a quote. LaurenB has a setting g with a similar head and could be a good source. Look at her hidden halo settings .
 
Thank you! I've worn a ring that was 8mm high and it was fine. I think 10mm would def be pushing it though.
 
I would be scared that knocking that setting in the wrong way might completely knock the head right off it.

I thought the exact same thing. The head doesn't seem very secure for something like that... like a fall...
 
GET 3 FREE HCA RESULTS JOIN THE FORUM. ASK FOR HELP
Top