hoorray
Ideal_Rock
- Joined
- May 16, 2003
- Messages
- 2,798
There has been a lot of cushion talk lately, and I''ve got the bug, having always admired the random cushions that I see. I''m currently looking at 2 different stones from different vendors. I thought I wanted the warmer color of an L/M, but am a little nervous since I''m sure I want to mount it in a white metal. I haven''t decided if I''ll put it into a pendant or a RHR. I''m thinking of starting with a pendant and maybe adding 2 side stones to make a 3 stone RHR down the road. My ering stone is E color, and my earrings are all in the f/g range. Both stones are from highly recommended vendors on this site.
I''m looking for opinions between the two -- specifically thoughts on the color, but also the general look, being a newbee at buying cushions. The first is more expensive (as it should be due to it''s higher specs), but they are both within budget. I''m attaching #1 to this post and will attach #2 in the next. (Hope it works...)
#1. 1.01 ct H VS1 GIA cert
table 60%, estimated crown angle 37% depth 71%
supposed to have great brilliance
6.26x5.52mm
#2 1.1 Light yellow (l-m-n) SI2, eye-clean to the vendor (and probably my non-20-year old eyes) uncerted as far as I know so far
mid-60''s depth, high crown, small table
6.2 x 5.6mm
(I know these specs are vague, but it''s from a vendor that everyone here trusts, so I tend to be ok with that)
There is a more square version of #2 which is also a contender, but I think I want the more rectangular shape to differentiate it more from my RB.
Any other questions I should be asking from either vendor? I may have one or both sent out to an appraiser if I can find a good one near me.
I''m looking for opinions between the two -- specifically thoughts on the color, but also the general look, being a newbee at buying cushions. The first is more expensive (as it should be due to it''s higher specs), but they are both within budget. I''m attaching #1 to this post and will attach #2 in the next. (Hope it works...)
#1. 1.01 ct H VS1 GIA cert
table 60%, estimated crown angle 37% depth 71%
supposed to have great brilliance
6.26x5.52mm
#2 1.1 Light yellow (l-m-n) SI2, eye-clean to the vendor (and probably my non-20-year old eyes) uncerted as far as I know so far
mid-60''s depth, high crown, small table
6.2 x 5.6mm
(I know these specs are vague, but it''s from a vendor that everyone here trusts, so I tend to be ok with that)
There is a more square version of #2 which is also a contender, but I think I want the more rectangular shape to differentiate it more from my RB.
Any other questions I should be asking from either vendor? I may have one or both sent out to an appraiser if I can find a good one near me.