Future wife and I have been doing lots (and lots and lots) of research as well as viewing many diamonds in our local area, and as a result, we came up with a very specific set of parameters we're seeking in a diamond. One thing that's made this process even trickier is that we want to see it in person before we buy.
We went to Chicago this past weekend, having emailed some jewelers on Jeweler's Row with our preferred specs. A few of them had diamonds sent in for us to see, and we spent a day hopping around from store to store and viewed 15 or so stones. One stood out above the rest in terms of its light performance to both of us... it really grabbed us more than any of the others we have seen. We put a 100% refundable deposit on it, but we were also planning to go to Houston in a few weeks to see some of the stones we're considering from Whiteflash and Brian Gavin.
Now we're torn between jumping on this one and forgetting about going to Houston (gut instinct), or holding out until we see the stones we're considering there (tempering impulsivity and exhausting all our choices).
Any thoughts? Here are the specs on the Chicago stone we love:
(Round, btw.)
GIA certified
1.52 carats
F color
VS2 clarity
Cut/Sym/Polish: XXX
Diameter: 7.36-7.40mm
Depth: 61.8%
Table: 56%
Crown: 35.0 degrees
Pavilion: 40.6 degrees
Girdle: 3.5%
Lower halves: 75%
Star: 55%
No fluorescence
HCA: 0.9 EX EX EX VG
Also had a Sarin report run on it, so here are the specs from that:
Diameter: 7.37-7.43mm
Depth: 61.6%
Table: 55.6% (range: 55.6-55.9%)
Crown: 35.1 (range: 35.0-35.2)
Pavilion: 40.7 (range: 40.4-40.
Girdle: 3.37% (range: 3.1-3.5%)
Lower halves: 76.5%
Star: 53.7%
HCA: 1.3 EX EX EX VG
We looked at it through our idealscope, a hearts&arrows viewer, and a microscope. Looked perfect through the idealscope and its H&As were ideal as well. We actually took lots of idealscope and H&A pictures, but tragically, future wife left her camera in a cab, so I can't share those here.
Thanks in advance for any advice.
We went to Chicago this past weekend, having emailed some jewelers on Jeweler's Row with our preferred specs. A few of them had diamonds sent in for us to see, and we spent a day hopping around from store to store and viewed 15 or so stones. One stood out above the rest in terms of its light performance to both of us... it really grabbed us more than any of the others we have seen. We put a 100% refundable deposit on it, but we were also planning to go to Houston in a few weeks to see some of the stones we're considering from Whiteflash and Brian Gavin.
Now we're torn between jumping on this one and forgetting about going to Houston (gut instinct), or holding out until we see the stones we're considering there (tempering impulsivity and exhausting all our choices).
Any thoughts? Here are the specs on the Chicago stone we love:
(Round, btw.)
GIA certified
1.52 carats
F color
VS2 clarity
Cut/Sym/Polish: XXX
Diameter: 7.36-7.40mm
Depth: 61.8%
Table: 56%
Crown: 35.0 degrees
Pavilion: 40.6 degrees
Girdle: 3.5%
Lower halves: 75%
Star: 55%
No fluorescence
HCA: 0.9 EX EX EX VG
Also had a Sarin report run on it, so here are the specs from that:
Diameter: 7.37-7.43mm
Depth: 61.6%
Table: 55.6% (range: 55.6-55.9%)
Crown: 35.1 (range: 35.0-35.2)
Pavilion: 40.7 (range: 40.4-40.
Girdle: 3.37% (range: 3.1-3.5%)
Lower halves: 76.5%
Star: 53.7%
HCA: 1.3 EX EX EX VG
We looked at it through our idealscope, a hearts&arrows viewer, and a microscope. Looked perfect through the idealscope and its H&As were ideal as well. We actually took lots of idealscope and H&A pictures, but tragically, future wife left her camera in a cab, so I can't share those here.
Thanks in advance for any advice.