Need Help, High color and strong Fluorescence

[bakingqueenbee]

Hello,

Looking to buy this diamond and I would love your thoughts/advice. We don't have a ton to spend but I believe this would be a nice diamond. So an f color with strong florescence. Should I be worried about the diamond appearing milky?
The HCA number is 1.4

Thank you in advance

GIA: 1189422923
Color: F
Clarity: SI1
Cut: Excellent
Fluorescence: Strong Blue
Polish: Excellent
Symmetry:Excellent

Table: 56%
Depth:62.6%
Crown Angle:35.5
Pavilion Angle: 40.6

 

[diamondseeker2006]

That diamond is really too deep and makes the stone face up smaller than a 1.5 ct stone should. You really want to see 7.4mm diameter on a 1.53 ct stone. Max depth should be around 62.3. I would also be hesitant about combining SI clarity with strong fluorescence. That is when there seems to be a greater chance of a negative effect. But every diamond is different. I'd still rule this diamond out. You may as well go into the 1.4 ct range if you want a 7.2mm diameter and get a better cut stone. You'd also avoid the price jump at 1.5 cts.

I am headed to bed but will try to check back tomorrow!

 

[squiggy241]

I have an E with Strong Blue and there are no neg effects at all, just a little fireball!

 

[ame]

I would not be concerned about the strong fluorescence necessarily but the stone is too deep and you can find one with better cut.

 

[bakingqueenbee]

I want a diamond with a lot of fire. What is the lowest color you guys would recommend, to be able to stretch the budget. Also I have change my depth range to 60% to 62%, is that a better range to use? Thank you again for all the help!!

 

[ame]

I want a diamond with a lot of fire. What is the lowest color you guys would recommend, to be able to stretch the budget. Also I have change my depth range to 60% to 62%, is that a better range to use? Thank you again for all the help!!

I usually search between 59 and a max of 62.0. My secret sauce is when you can get a 60% with a 55% table you're going to get a really nice, firey and bright stone when you can find one with a crown angle of 34.5 and a pavilion of 40.7/40.8. That all goes REALLY well together.

Lowest color I comfortably will go is a J, and I love Fluorescence. If you aren't comfortable that low, maybe go with a G or H.

Which vendors are you looking at and what's the budget? We can find you a few.

 

[bakingqueenbee]

Is this one better???

GIA: 7181477431
Measurements: 7.33 - 7.36 x 4.52 mm
Weight : 1.50
Color: G
Clarity: SI1
Cut: Excellent
Fluorescence: Strong Blue
Polish: Excellent
Symmetry:Excellent

Table: 57%
Depth:61.5%
Crown Angle:35.5
Pavilion Angle: 40.6

Any advice would be great. Thank you so much for your help

 

[bakingqueenbee]

AME,

Thank you. The max budget is 10,000!!!! He wants the biggest things we can get . I want good color and great cut with fire. Thank you

 

[diamondseeker2006]

Fire is only observable in certain lighting, so just be aware of that. This one is better, but you still have to have the SBF evaluated with an SI clarity stone. I have also owned a diamond with SBF but it was VS1 clarity and the fluorescence was great! Get an idealscope image, too.

 

[bakingqueenbee]

Also found

https://enchanteddiamonds.com/diamonds/view/R169-8SE1D8?cid=pricescope 9640

GIA: 2126969350
Measurements: 7.76 x 7.71 x 4.72 mm
Weight : 1.69
Color: I
Clarity: SI1
Cut: Excellent
Fluorescence: NONE
Polish: Excellent
Symmetry:Excellent

Table: 54%
Depth:61.%
Crown Angle:33.5
Pavilion Angle: 40.8


https://enchanteddiamonds.com/diamonds/view/R140-LVVRW1 9790

GIA: 1189252713
Measurements: 7.18 x 7.21 x 4.44 mm
Weight : 1.40
Color: F
Clarity: SI1
Cut: Excellent
Fluorescence: NONE
Polish: Excellent
Symmetry:Excellent

Table: 55%
Depth:61.7%
Crown Angle:35
Pavilion Angle: 40.6

 

[ame]

That third one you posted might need to be checked out for eye cleanliness--that inclusion top right might be eye visible.

 

[ame]

This is overbudget unfortunately but would be really nice. 10,000 for a really nice 1.5ct is pushing it.
http://www.briangavindiamonds.com/diamonds/diamond-details/1.522-j-vs2-round-diamond-ags-104074030082


In budget but smaller than you probably want:
http://www.highperformancediamonds.com/index.php?page=view-id-diamond-infinity-new&id=1421
http://www.highperformancediamonds.com/index.php?page=view-id-diamond-infinity-new&id=1345
http://www.highperformancediamonds.com/index.php?page=view-id-diamond-infinity-new&id=794
http://www.goodoldgold.com/ecommerce/1-22ct-h-si1-superior-round-hearts-and-arrows-diamond.html
http://www.goodoldgold.com/ecommerce/1-27ct-i-vs2-superior-round-hearts-and-arrows-diamond.html
http://www.goodoldgold.com/ecommerce/1-30ct-j-vs1-superior-round-hearts-and-arrows-diamond.html
http://www.jamesallen.com/loose-diamonds/round-cut/1.38-carat-j-color-vs1-clarity-excellent-cut-sku-48628
http://www.jamesallen.com/loose-diamonds/round-cut/1.35-carat-j-color-vs2-clarity-excellent-cut-sku-322010
http://www.jamesallen.com/loose-diamonds/round-cut/1.34-carat-j-color-vs1-clarity-sku-382719
http://www.jamesallen.com/loose-diamonds/round-cut/1.31-carat-j-color-vs1-clarity-excellent-cut-sku-95994
http://www.jamesallen.com/loose-diamonds/round-cut/1.31-carat-j-color-vs1-clarity-excellent-cut-sku-41343
http://www.jamesallen.com/loose-diamonds/round-cut/1.51-carat-j-color-vs1-clarity-excellent-cut-sku-359174
http://www.jamesallen.com/loose-diamonds/round-cut/1.31-carat-h-color-vs2-clarity-excellent-cut-sku-379976

Make sure it's really eyeclean, there's a feather in the table that you can see at an angle:
http://www.jamesallen.com/loose-diamonds/round-cut/1.52-carat-j-color-si1-clarity-excellent-cut-sku-387922


From this site:
You'd have to see about this being eyeclean, the inclusions are...a bit much for me
https://enchanteddiamonds.com/diamonds/view/Round/GIA-Certified-1,54-Carat-J-Color-SI1-Clarity-Diamond-9S6SDN

https://enchanteddiamonds.com/diamonds/view/Round/GIA-Certified-1,5-Carat-J-Color-VS1-Clarity-Diamond-3SZ4NE

 

[bakingqueenbee]

Thank you for all the great choices!!!