Need help for 0.6 - 0.7 RB

[deadcella]

Hi Everyone,

First of all, thank you for taking your precious time to read this post.

I am looking for a 0.6 - 0.7 Round cut diamond, which will be set in a 3.5 size ring with North-East-South-West setting that is similar to this:
http://www.birks.com/en/featured/Engagement/Solitaire-Engagement-Rings/g64-712/895286

I do not have a high requirement for this small (0.6 - 0.7) diamond, I will be satisfy as long as the diamond is eye-clean, and the warm color is not noticeable.

I am thinking of getting the following GIA certified diamond:
Shape: Round Brilliant
Carat weight: 0.69
Cut: Ideal,
Colour: J
Clarity: VS2
Depth %: 61.4%, Table %: 55%, Crown angle: 34, Pavilion angle: 40.8, Culet: None
Polish: Excellent, Symmetry: Excellent
Girdle: Thin to Medium, Faceted
Fluorescence: Medium
Measurements: 5.70 x 5.72 x 3.50 mm

Based on your expertise, do you think if this is a good choice? Also would you think if the warm "J color " will be very noticeable for a 0.69 carat diamond?

Any comments would be appreciated. Thank you for your help in advance.


Regards,
Cella

 

[davi_el_mejor]

numbers look great! And I wouldn't worry too much about the warmness with the fluorescence. Just make sure your vendor has a decent return policy if you do not like it.

 

[tyty333]

Here is a comparison of color (well cut stones) D-J
http://vimeo.com/3288695

 

[Ravinmad]

what is the price tag on the stone here. I agree the numbers look good, and everything seems in order, but how much for this stone if we may ask?

 

[deadcella]

Thank you so much for all of your replies,

Would it be a good price it I can get it for less than $2000?

I am just worry that the diamond will look yellow after it is been set into a white gold setting, I've never saw a J diamond but the following video makes me worry:

A video for 1CT , SI1 Clarity , J Color:
http://www.youtube.com/watch?v=6ewWTWERbbU

Is it normal that the "1CT J" shows a faint warmth like this? Would a typical 0.69 stone look less warmth than the diamond in the video? What is the "safe range" of color for a 0.6 - 0.7 diamond?

If the following two diamonds cost $400 more, would one of this be a good alternative?
______________________________________
GIA certified diamond
Shape: Round Brilliant
Carat weight: 0.64
Cut: Ideal
Colour: H
Clarity: VS2
Depth %: 61.3%, Table %: 54%, Crown angle: 34.0, Pavilion angle: 40.8, Culet: None
Polish: Excellent, Symmetry: Excellent
Girdle: Thin to Medium, Faceted
Fluorescence: None
Measurements: 5.55 x 5.60 x 3.42 mm
______________________________________
AGS certified diamond
Shape: Round Brilliant
Carat weight: 0.60
Cut: Ideal
Colour: H
Clarity: VS2
Depth %: 61.1%, Table %: 56.5%, Crown angle: 34.4, Pavilion angle: 40.7, Culet: None
Polish: Excellent, Symmetry: Excellent
Girdle: Thin to Slightly Thick Faceted
Fluorescence: None
Measurements: 5.42 x 5.45 x 3.33 mm
______________________________________


Thank you again for your time and help.

Regards

 

[Ravinmad]

look at aset and Ideal Scope images, both of those look like nice stones on paper by stats alone.

 

[Ravinmad]

http://www.jamesallen.com/diamonds/I-VS2-Ideal-Cut-Round-Diamond-1466111.asp

I VS2, this will be sub 2000 with your PS discount. run it thru the HCA and check the score, I have a meeting to goto soon, heh

 

[davi_el_mejor]

http://www.jamesallen.com/diamonds/I-VS2-Ideal-Cut-Round-Diamond-1466111.asp

I VS2, this will be sub 2000 with your PS discount. run it thru the HCA and check the score, I have a meeting to goto soon, heh

This one runs a 2.4 on the HCA

 

[deadcella]

Thank you all for your inputs to my post