cushioncutter
Rough_Rock
- Joined
- Oct 15, 2008
- Messages
- 4
As I posted a couple of days ago I am new to the site and so greatful that I have found it!!!!
Since I am in the market for a cushion I took that advise that many of you gave me and I contacted Mark at ERD. Just thought I would share what he came back with 2 stones.
I''m considering the one on the left. It''s a 1.21 cushion brilliant specs are as follows:
6.69 x6.01x 4.11
E
VS2
p/s: VG/VG
No florescence
Table 65%
Depth 68.4 %
Extremely Thick Faceted
Ratio 1.11
Slightly out of square which is what I''m looking for. Should have fairly good brilliance and fire throughout the stone.
Opinions?

Since I am in the market for a cushion I took that advise that many of you gave me and I contacted Mark at ERD. Just thought I would share what he came back with 2 stones.
I''m considering the one on the left. It''s a 1.21 cushion brilliant specs are as follows:
6.69 x6.01x 4.11
E
VS2
p/s: VG/VG
No florescence
Table 65%
Depth 68.4 %
Extremely Thick Faceted
Ratio 1.11
Slightly out of square which is what I''m looking for. Should have fairly good brilliance and fire throughout the stone.
Opinions?
