shape
carat
color
clarity

My Brian Gavin Re-cut Diamond - Before and After

renogirl

Shiny_Rock
Joined
Jun 19, 2011
Messages
303
My re-cut is compete. Wanted to share the analysis reports, so here's the before... :nono:

Pre recut_Arrows100.jpg

Pre recut_ASET100.jpg

Pre recut_Hearts100.jpg

Pre recut_IDS100.jpg
 
And the After :appl: :appl: :appl:

1810_FINALrecut_ARROW.jpg

6468_FINALrecut_IDS.jpg

7314_FINALrecut_HEART91.jpg

9861_FINALrecut_ASET.jpg
 
It went from 1.009 ct down to 0.904ct...so didn't loose much size. I couldn't be happier!
 
That's fantastic! Do you have any before and after photos of the stone itself?
 
VERY nice! How are you going to set it??
 
No before photos of the stone, and it's still with Brian Gavin.

It was finished on Monday, but since I still can't figure out what to do with it, I finally asked them to go ahead and send it to me.

Still toying around with the idea of setting it in a three-stone ring, with pear sapphire sides for my right hand. Brian Gavin confirmed that it's eye clean and would be suitable in a ring (it's an H color, SI2).
 
Looks great!! Do you have the numbers before the re-cut? There was a lot of leakage!
 
It turned out great!!! My 1 ct. stone ended up at .80 after recutting, so yours was even better! I think you'll be so pleased! I am looking at halo rings right now to reset mine, as a matter of fact!
 
Wow! that's awesome! Can't wait to see what you do with it!
 
Laila: Here are the numbers
BEFORE :nono:
Depth: 61.4%
Table: 62.7%
PA: 41.7
CA: 34.5
LGH: 79%

AFTER :bigsmile:
Depth: 60.2%
Table: 57.2%
PA: 40.9
CA: 33
LGH: 77%

Oh, and it went from 6.4mm down to 6.3mm...not too shabby!

Diamondseeker: Just read that you're resetting out of your pendant. I was struggling with pendant vs ring, but I think I would get more use out of the RHR. Can't wait to see what you choose!
 
Wow, what an improvement!!! Not much loss in size, either - I'm always amazed at these re-cuts, it's like magic! Just great!

edited for spelling
 
This is fantastic!! Good to know this is an option.
 
renogirl|1321063130|3060023 said:
Laila: Here are the numbers
BEFORE :nono:
Depth: 61.4%
Table: 62.7%
PA: 41.7
CA: 34.5
LGH: 79%

AFTER :bigsmile:
Depth: 60.2%
Table: 57.2%
PA: 40.9
CA: 33
LGH: 77%

Oh, and it went from 6.4mm down to 6.3mm...not too shabby!

What an improvement!!! :appl:
 
Amazing transformation - can't wait to see it!
 
Very nice recut!
 
very nice!!... :appl:
 
Picked up the diamond today, and wanted to share a few photos of my new and improved stone! Sorry, my photography is terrible...but I can assure you it's quite beautiful.

DSCN1126.JPG

DSCN1123.JPG

DSCN1118.JPG
 
Beautiful. Great size retention. I know you must be thrilled with the outcome.
 
:appl: gorgeous!! its unbelievable how they can do that and you still didnt lose much size!
 
Wow, it looks incredible! I did a BGD recut, too, and put the diamond into a Barbara pendant.
 
Just beautiful!!! :love: :appl:
 
Thanks everyone! I'm really happy with the results :D

Now, if I could only decide what to do with it...
 
Can you tell the difference? How is it different to your eyes?
 
Hi Gypsy, good question.

Before the cut, it only sparkled "sometimes"...and looked kind of dead in the center, especially outdoors. Obviously, my husband and I knew nothing about diamonds when we purchased it 11 years ago - just color, clarity and weight. (Wish I had taken some photos before I sent it off as the transformation is so interesting).

When I unwrapped it from the packaging this morning, of course, I knew it was going to be superior to the "before"...but I could tell right away that it had so much more "life". It catches all the light and now it just twinkles!!! Plus, it's really smooth from being polished. I'm really looking forward to setting it into a RHR so I can enjoy it now and wear it proudly, since it was my original engagement diamond.
 
GREAT information, what's your setting budget. And you said a three stone with sapphire pears? I think that would be beautiful.
 
As for budget, I'd like to keep it to 2K max. If I go with pear sides, I've decided on blue sapphires - I was thinking yellow, but now I think blue would set the center stone off better, and look best in white gold. I'm also thinking about doing a bezel around all three stones for added protection and ease of wear on right hand.
 
Oh I like that. Nice blue sapphires-- you can get in touch with Simply sapphires and ask them what they have that they recommend, their prices are really good and I think that if you source your own you might save some money.

Do you like larger or smaller proportional side stones?
 
Which look do you prefer:

classic-pear-shaped-sapphire-engagement-ring-in-platinum~12407769.jpg

classic-pear-shaped-sapphire-engagement-ring-in-platinum-for-larger~12407653.jpg
 
Hi Gypsy,

Thanks for letting me know about Simply Sapphires - I hadn't thought about sourcing my own stones! I definitely like the smaller sides.

I was thinking of about .20-.25 with the .91 center stone for a nice contrast.
 
It looks amazing! James Allan has a really nice stock three stone with sapphire sides for a good price, the mount is a la Tiffany.
 
GET 3 FREE HCA RESULTS JOIN THE FORUM. ASK FOR HELP
Top