Is this bordering steep-deep?

[mayo1209]

The specs are:

.88 ct tw
Table % :57
Depth %:60.7
Crown Angle:35.5
Pavilion Angle:40.6


Lorelei and Ellen and other experts - Please weigh in so that I may decide to see it or elimimate it. It is H&A. Is the table too big?

Thank you

 

[Lorelei]

Date: 7/28/2009 10:55:15 AM
Author:mayo1209
The specs are:

.88 ct tw
Table % :57
Depth %:60.7
Crown Angle:35.5
Pavilion Angle:40.6


Lorelei and Ellen and other experts - Please weigh in so that I may decide to see it or elimimate it. It is H&A. Is the table too big?

Thank you

Not steep deep, this is where both crown and pavilion angles are both too steep and deep. The pavilion angle is not steep at all at 40.6 and combined with the crown angle it could be a great looking diamond. There is generally more flexibility with crown angles than pavilion. Next step is to see if you can get an Idealscope for the diamond so we can see how it all works together and of course h&a images as it is purported to be a hearts and arrows cut.

Table size is fine also. Can you also post the diameter in MM please, type of grading report, polish, symmetry, star and lower girdle facet percentages too please? And the colour and clarity too if you could please.

 

[stone-cold11]

Numbers look good, nothing to worry there. IS/ASET and a Hearts image is next.

 

[mayo1209]

Here is the hearts and arrows on this diamond, I am still awaiting ASET images

 

[mayo1209]

And the hearts
What do you guys think?

 

[stone-cold11]

Do you have a larger image?

 

[mayo1209]

No these are the only images I have from the vendor so far, do they look ok?

 

[Lorelei]

Date: 7/28/2009 9:41:51 PM
Author: mayo1209
No these are the only images I have from the vendor so far, do they look ok?

Its looking good but I can't see the hearts image in enough detail, anyway it could be enlarged please?

 

[mayo1209]

I tried enlarging the pic - I hope the picture hasn''t lost too much clarity.

Thanks for your help fellow PSers

 

[Lorelei]

Date: 7/29/2009 9:40:35 PM
Author: mayo1209
I tried enlarging the pic - I hope the picture hasn''t lost too much clarity.

Thanks for your help fellow PSers

From what I can see it looks good but unfortunately I can''t see enough to examine the image in any detail which is needed to evaluate this diamond''s overall cut precision. The image needs to be a lot larger but as you say maybe clarity is lost in doing so....

 

[stone-cold11]

Ditto, can you ask the vendor for a larger image to be posted here? That would be better.