bobbyjones
Rough_Rock
- Joined
- Jul 18, 2012
- Messages
- 6
Ok,
I believe i have narrowed my search down to two diamonds. Any advice would be appreciated. I have been told on several occasions not to put to much weight into the HCA # is there anything else that might lean you towards one and not the other.
the two stones are within 100 bucks
#1
7.38 x 7.41 x 4.54
1.52ct G, Si2 eye clean, no flour. no culet
triple ex
tbl =59% dpt=61.4% cwn = 33.5* pav= 41.4* cwn angle=13.5% pav angle=44.0%
med to slight thick faceted girdle 4.0%
HCA 4.3
#2
7.47 X 7.50 X 4.52
1.56ct G, si2 eye clean, no flour. no culet
triple ex
tbl=59% dpt=60.4% cwn = 34.0* pav=40.8* cwn angle=14% pav angle=43%
med to slight thick girdle faceted 3.5%
HCA 1.4
both plots look very clean and i would be comfortable with either of these stones. Is there another way to tell light performance without actually seeing the stone and comparing side by side.
thanks!!
I believe i have narrowed my search down to two diamonds. Any advice would be appreciated. I have been told on several occasions not to put to much weight into the HCA # is there anything else that might lean you towards one and not the other.


the two stones are within 100 bucks
#1
7.38 x 7.41 x 4.54
1.52ct G, Si2 eye clean, no flour. no culet
triple ex
tbl =59% dpt=61.4% cwn = 33.5* pav= 41.4* cwn angle=13.5% pav angle=44.0%
med to slight thick faceted girdle 4.0%
HCA 4.3
#2
7.47 X 7.50 X 4.52
1.56ct G, si2 eye clean, no flour. no culet
triple ex
tbl=59% dpt=60.4% cwn = 34.0* pav=40.8* cwn angle=14% pav angle=43%
med to slight thick girdle faceted 3.5%
HCA 1.4
both plots look very clean and i would be comfortable with either of these stones. Is there another way to tell light performance without actually seeing the stone and comparing side by side.
thanks!!
