.72 Ct Diamond Help - Close to Buying

[Ring508]

What do you think about this .72 Ct round cut ACA diamond? Im very close to buying it and placing it with a WF sleek line pave. Would any of the inclusions be seen by the naked eye?

http://www.whiteflash.com/hearts_arrows/A-Cut-Above-H-A-cut-diamond-912914.htm#

. Report: AGS
. Shape: A Cut Above H&A
. Carat: 0.723
. Depth %: 60.9
. Table %: 55.7
. Crown Angle: 34.8
. Crown %: 15.4
. Star : 53
. Pavilion Angle: 40.8
. Pavilion %: 43
. Lower Girdle %: 78
. Girdle: Thin Faceted
. Measurements: 5.81-5.83X3.54
. Light Performance: 0
. Polish: Ideal
. Symmetry: Ideal
. Culet: Pointed
. Fluorescence: Negligible

 

[Lorelei]

Welcome to Pricescope,

This diamond could be an excellent choice, as to whether the inclusions are visible to the naked eye or not, only the staff at WF can tell you. They will be able to get the diamond out and talk you through it, and let you know if the stone is eyeclean to your standards or not. Be specific with what is acceptable with you, i.e - if you don''t want to see any visible inclusions at close scrutiny from any angle, let them know that so you are both on the same page.

 

[Ring508]

Any more opinions would be greatly appreciated. I found out that inclusions might be visible to the naked eye from 3" away but not from 11" away.

 

[MissGotRocks]

How about looking at an SI1 stone? I think there are more stones to look at in that size range. I would also ask the folks at WF to recommend some stones to you. You can tell them what things are most important to you - size, color or clarity. As long as you are looking at the ACA line, you can''t go wrong there with cut.

You could also move down a bit in color; don''t know if you''re stuck on a colorless stone or not.

Good luck - let us know what you find!