Stone Advice V3

[skimaster08]

This is the third stone I have gotten advice from you guys on. The first was a 6.2 HCA, the second was a SI1 that seemed a little to blemished for my liking and hopefully this one goes a little better than those two.

GIA 6245407829 (https://www.gia.edu/report-check?reportno=6245407829)
HCA - 1.8
Round Brilliant

Measurements - 6.83 - 6.87 x 4.28 mm

Carat Weight - 1.25 carat

Color Grade - G

Clarity Grade - VS2

Cut Grade - Excellent

proportions

Depth -62.4 %

Table - 56 %

Crown Angle - 36.0°

Crown Height - 16.0%

Pavilion Angle - 40.6°

Pavilion Depth - 42.5%

Star Length - 50%

Lower Half - 70%

Girdle - Medium to Slightly Thick, Faceted, 3.5%

Culet - None

 

[gm89uk]

Although the 36/40.6 combo works, I would avoid it with a 70% lower half, a higher crown needs a longer LGF or you will get over obstruction. It's a no from me.

 

[whitewave]

^^^^^ the lower half % is a problem. It's also a no from me.

 

[bmfang]

Like the other two above, the lower half causes issues for me. Especially on a GIA report where a 70% could mean anywhere between 67.5% to 72.5%. You will likely have way too large arrows and too much contrast under the table when looking at it face up.