Band to match/fit Whiteflash Butterfly 3 stone

[autumngems]

I acquired a 3 stone set in Whiteflash Butterfly setting, has anyone bought a band to match/fit the Butterfly setting?

 

[MissGotRocks]

Yssie had originally designed that ring. I think she just wore a plain band with it. You might also consider a channel set or bead set wedding band to compliment the three stone as you don’t want to overwhelm it IMO.

Is there anything that you are considering yet?

Edited to add this listing in preloved if it would work for you: https://www.pricescope.com/community/threads/brian-gavin-legera-pave-band-in-platinum-size-6.291379/

 

[autumngems]

Yssie had originally designed that ring. I think she just wore a plain band with it. You might also consider a channel set or bead set wedding band to compliment the three stone as you don’t want to overwhelm it IMO.

Is there anything that you are considering yet?

Edited to add this listing in preloved if it would work for you: https://www.pricescope.com/community/threads/brian-gavin-legera-pave-band-in-platinum-size-6.291379/

My ring is 18kt unplated wg. I am hoping to find something that fits up against the design without looking gapped or odd. It's a lovely band though.

 

[MissGotRocks]

My ring is 18kt unplated wg. I am hoping to find something that fits up against the design without looking gapped or odd. It's a lovely band though.

You might also consider a thin plain band to wear and then pair it with another diamond wedding band. A diamond band would sit flush against a plain wedding band whereas it might not sit flush with your setting as it is a trellis setting and the side is not perfectly flat. Just a thought if you want to minimize any gap.

 

[Rfisher]

I am hoping to find something that fits up against the design without looking gapped or odd

You are wanting a band that’s scalloped-to-fit-flush the three stone ring?
I think it’d need to be built to order with the jeweler having your ring in hand for a while. I doubt one stock out there happens to exist?

Are you envisioning the band (while sitting flush) , visible evenly from face on?
Or being hidden by the centerstone is ok?

 

[tyty333]

Have you tried it on with a plain band? I dont think the sides are that curvy that it would need a wedding band to fit its lines.
I have a 3 stone with 3 little donuts at the bottom that I wear a plain band with. The wedding band "looks" like it goes with
the earring because it sits flush enough to not cause a big gap.

Try it with a thin wedding band and see what you think.

 

[HockeyMama]

I have a WF butterfly and wear a plain gold band with it. The gallery is such that it can fit flush. I bought mine from them because I wanted the width to the same as well, so it is quite thin and could be used as a spacer if you want something with diamonds as well.

 

[Rfisher]

I have a WF butterfly and wear a plain gold band with it. The gallery is such that it can fit flush. I bought mine from them because I wanted the width to the same as well, so it is quite thin and could be used as a spacer if you want something with diamonds as well.

Will you please share a pic?

 

[HockeyMama]

Will you please share a pic?

H

#JOTW Thread 'Whiteflash Butterflies Perfection with 2.2 F VVS2 ACA center'

Sep 27, 2021

All,

I want to share this ring out of gratitude to Whiteflash and to this forum. It's been quite a journey for me. I started with a 3.3 D MRB non ACA solitaire that WF helped me find but ultimately it did not feel right (too big {gasp}, and not mind clean). I then got this 2.187 stone set in a solitaire and while it was clearly beautiful, it left me cold. In fact, I've been following a recent thread about ring ambivalence and second guessing, and I went through a similar roller coaster. I was ready to abandon the project, but my husband knew this was important to me. He helped me...

• HockeyMama
• jotw
• Replies: 31
• Forum: Show Me the Bling! (Rings, Earrings, Jewelry)

• 
• 

Of course! (Also it's platinum, not gold, oopsy). Lots of pics in my thread but here is one with the band...

 

[HockeyMama]

Here's a photo with the plain band as a spacer. I never wore them together (too much for me), and the five stone is now two three-stone earrings, but you get the idea! All the little stones are around 0.32 ct each and the biggun is about 2.2.

 

[autumngems]

Have you tried it on with a plain band? I dont think the sides are that curvy that it would need a wedding band to fit its lines.
I have a 3 stone with 3 little donuts at the bottom that I wear a plain band with. The wedding band "looks" like it goes with
the earring because it sits flush enough to not cause a big gap.

Try it with a thin wedding band and see what you think.

I have not tried a plain band yet, just assumed it would need to be scalloped to look right. I am on furlough so I will visit a few jewelry shops tomorrow and try a few things.

 

[autumngems]

You are wanting a band that’s scalloped-to-fit-flush the three stone ring?
I think it’d need to be built to order with the jeweler having your ring in hand for a while. I doubt one stock out there happens to exist?

Are you envisioning the band (while sitting flush) , visible evenly from face on?
Or being hidden by the centerstone is ok?

Trying some tomorrow to see which I might like, I think I want to be able to see it