Diamond Jewelry Forums

Picture Gallery

Video Gallery

|

Search |

Posted Today |

Most Active |

Help

ť Home ť

ť Diamond Prices and Grading ť

ť RockyTalky ť

ť How much should custom-design ring cost?

How much should custom-design ring cost?

P: 9/24/2008 4:56:12 PM
twinkiestar Rough Rock Total Posts: 2 Last Post: 9/25/2008 Member Since: 9/24/2008	Hi, I am having a custom platinum engagement ring made and would like to know if we are getting fair price quotes. The shank of the ring will be 2.5mm wide, it will have one round center stone (1.5 ct) and princess-cut channel stones (approx. 5 on each side for a combined weight of 1ct). We already own the 1.5ct center stone. Jeweler A quoted me $3900 which includes everything (design, labor, platinum, and side stones) with the exception of the center stone. Jeweler B quoted me $1200 for just the "design" work, and roughly estimated that the platinum and side stones would add on another $1800. The price would go up and down depending on the platinum spot price and the size/weight of side stones. Are their prices reasonable or should I continue shopping around for a jeweler? Thank you in advance for any advice you can provide.
Posted: 9/24/2008 4:56:12 PM

There are 7 replies to this message. There are 7 replies on this page.

P: 9/24/2008 5:18:53 PM
JulieN Ideal Rock Total Posts: 7,143 Last Post: 11/22/2009 Member Since: 7/25/2005	I'd like to know what about this ring is unique that you would require a custom job?
Posted: 9/24/2008 5:18:53 PM

P: 9/24/2008 5:30:15 PM
luvmyhalo Ideal Rock Total Posts: 1,037 Last Post: 8/11/2009 Member Since: 12/4/2007	That sounds super pricey! I'm with JulieN, have you not found anything you like that doesn't have to be custom made? Give the folks at Whiteflash a call.
Posted: 9/24/2008 5:30:15 PM

P: 9/24/2008 5:51:02 PM
neatfreak Ideal Rock Total Posts: 13,442 Last Post: 11/22/2009 Member Since: 2/17/2007	Sounds really really pricey. I ditto checking stock pieces and calling places like Whiteflash.
Posted: 9/24/2008 5:51:02 PM

P: 9/24/2008 6:28:45 PM
MsMisty Cut Rock Total Posts: 104 Last Post: 6/24/2009 Member Since: 7/10/2008	My Fi had my ring custom made with patinum and 1 point pave on the shank and midway around the ring (about .4 tcw D-F, VS1 or higher quality diamonds). I believe the cost was 3k before tax...so considering that you have more diamonds on yours, i would consider this within range...if you want custom work you have to pay for the custom job. =)
Posted: 9/24/2008 6:28:45 PM

P: 9/24/2008 6:52:40 PM
Inanna Cut Rock Total Posts: 468 Last Post: 11/4/2009 Member Since: 9/14/2008	Date: 9/24/2008 5:18:53 PM Author: JulieN I'd like to know what about this ring is unique that you would require a custom job? Ditto JulieN's question. From my experience with ring shopping your design description seems fairly common. Most nicer jewelry stores we visited already had various princess channel settings.
Posted: 9/24/2008 6:52:40 PM

P: 9/25/2008 2:01:12 AM
twinkiestar Rough Rock Total Posts: 2 Last Post: 9/25/2008 Member Since: 9/24/2008	Hi, Thank you for your comments and advice. What is unique about the design is the shank shape. I have attached a sketch of the shape -- it is kind of squarish. It is a European design. I was in London and saw these rings at a high-end jeweler years ago. I tried them on and fell in love with them. Some argue that it does not look any different than a circular shape when you put it on your finger, however, I noticed the subtle difference. Also, the shape prevents the ring from twisting around your finger. Unfortunately, I can't remember the designer so I'm just trying to replicate it here in California. Thanks!
Posted: 9/25/2008 2:01:12 AM

P: 9/25/2008 2:56:00 AM
arjunajane Ideal Rock Total Posts: 7,764 Last Post: 11/22/2009 Member Since: 1/18/2008	Hi twinkiestar - there are a number of brands that do euro-shank - A Jaffe is one. Also, as your design sounds not too "out there", what about finding a ring you like at say WF and asking them to customise the shank? Then you won't have to pay for CADS, design fees etc. Just a thought! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "And let today embrace the past with remembrance and the future with longing." Kahlil Gibran
Posted: 9/25/2008 2:56:00 AM

Previous Page

Next Page

Ť Help! Boyfriend in need of assistance! 1.2 D vs. 1.5 G. Ť

ť New user and first time diamond buyer ť

Jump to:

Contact Us \| Back Home \| Privacy Statement \| Forum Agreement \| Forum Policies
Ideal BB Version: 0.1.5.4.beta1	Message forum software powered by the Ideal BB

Pricescope - Knowledge - Diamond Prices - Tools - Resources - About

Š 2000-2009 Pricescope. Terms of Use Privacy Policy Disclaimer
forum archives