Engagement Rings Direct
 

Diamond Jewelry Forums   Picture Gallery   Video Gallery   Journal

   
 Search Posted Today Most Active Help   
 » Home »  » Diamond Prices and Grading »  » RockyTalky »  » can you wear plat. & gold side by side?


  

 can you wear plat. & gold side by side?

P:  8/9/2007 2:06:13 PM  
vizsla
vizsla

Ideal Rock
Total Posts: 663
Last Post: 11/7/2009
Member Since: 8/23/2005
 
i haven't been able to get a straight answer... so i thought i better post my conundrum to the experts.

i have 2 1/2 eternity bands in platinum (our version of an E ring;) - my FI is ordering my wedding band tonight... we found a 1/2 eternity yellow diamond band in platinum - to match the metal of my E ring... however, i am worried that the tiny teeny yellow diamonds in plat aren't going to look "yellow" - since they are so small i'm afraid the plat will wash them out....

SO, i found a full eternity band of yellow diamonds in yellow gold (same price)... i think the contrast would be killer... but am nervous about wearing yellow gold next to platinum.....

please help....

thanks!!!!

Posted:  8/9/2007 2:06:13 PM

 There are 17 replies to this message.  There are 17 replies on this page.

P: 8/9/2007 2:11:29 PM
vizsla
vizsla

Ideal Rock
Total Posts: 663
Last Post: 11/7/2009
Member Since: 8/23/2005
 
pic of yellow diamond band

 

 

Posted:  8/9/2007 2:11:29 PM
P: 8/9/2007 2:30:11 PM
neatfreak
neatfreak

Ideal Rock
Total Posts: 13,464
Last Post: 11/23/2009
Member Since: 2/17/2007
 
No, you shouldn't wear them side by side. But I don't really know how long it would take to cause damage.

Posted:  8/9/2007 2:30:11 PM
P: 8/9/2007 2:33:39 PM
vizsla
vizsla

Ideal Rock
Total Posts: 663
Last Post: 11/7/2009
Member Since: 8/23/2005
 
awww crap..... i was afraid of that... i tend to research until i find the answer that i like then i stop ;) but i wouldn't want to ruin the beautiful rings i already have... boo... platinum it is.....

Posted:  8/9/2007 2:33:39 PM
P: 8/9/2007 3:50:53 PM
crown1
crown1

Ideal Rock
Total Posts: 1,374
Last Post: 11/23/2009
Member Since: 11/22/2006
 
i would suggest that you ask signed pieces to do you a platinum full eternity style in yellow sapphires. you could use the maternity rings for the mounting and ask to substitute yellow for the blue sapphire.


the next best thing to being wise oneself is to live in a circle of those who are c.s. lewis

Posted:  8/9/2007 3:50:53 PM
P: 8/9/2007 7:21:29 PM
WorkingHardforSmallRewards
WorkingHardforSmallRewards

Ideal Rock
Total Posts: 1,234
Last Post: 12/14/2008
Member Since: 6/6/2007
 
I have a suspicion that it is not as big a deal as many people on here make it out to be. After all, it isn't like one is a metal and the other is a bar of soap. they are both quite strong, thus it is probably more a matter of small minute scratching that will make the metal look...well, scratched up and dull.

I would recommend calling jewlers mutual and seeing if they will still insure it if you have the two together.

if they will still insure it

1) then I doubt there is a major problem, because if there were a major risk they would probably take action on it--as they would have a particularly vested interest in knowing and charging for it.

2) you would have it insured, so just get it and take your chances:)

____________________________


"Signature-Ideal Meat

I'm Lovin it
McDonald's."

Posted:  8/9/2007 7:21:29 PM
P: 8/9/2007 7:25:27 PM
Tacori E-ring
Tacori E-ring

Ideal Rock
Total Posts: 16,101
Last Post: 11/23/2009
Member Since: 8/15/2005
 
I thought it was ok to stack PLT with YG but not PLT with WG (it will wear down faster). Maybe one of the jewelers will chime in. Pretty band!

Posted:  8/9/2007 7:25:27 PM
P: 8/9/2007 8:55:45 PM
crown1
crown1

Ideal Rock
Total Posts: 1,374
Last Post: 11/23/2009
Member Since: 11/22/2006
 
Date: 8/9/2007 7:21:29 PM
Author: WorkingHardforSmallRewards
I have a suspicion that it is not as big a deal as many people on here make it out to be. After all, it isn't like one is a metal and the other is a bar of soap. they are both quite strong, thus it is probably more a matter of small minute scratching that will make the metal look...well, scratched up and dull.


I would recommend calling jewlers mutual and seeing if they will still insure it if you have the two together.


if they will still insure it


1) then I doubt there is a major problem, because if there were a major risk they would probably take action on it--as they would have a particularly vested interest in knowing and charging f


2) you would have it insured, so just get it and take your chances:)





you may correct on the insurance angle but i think that would be wear and tear and i don' think that is usually covered.


the next best thing to being wise oneself is to live in a circle of those who are c.s. lewis

Posted:  8/9/2007 8:55:45 PM
P: 8/9/2007 9:05:56 PM
WorkingHardforSmallRewards
WorkingHardforSmallRewards

Ideal Rock
Total Posts: 1,234
Last Post: 12/14/2008
Member Since: 6/6/2007
 
what do you mean wear and tear? I mean, if there were a true durability issue such as the ring breaking or a diamond falling out, that would be covered even if caused by wear and tear right? (I don't know anything about diamond ring insurance yet, unfortunately)

but as far as scratching and being dull is concerned...well, I imagine that would be the task of the owner to upkeep and maintain, and it would no doubt take more regular maintenance.

____________________________


"Signature-Ideal Meat

I'm Lovin it
McDonald's."

Posted:  8/9/2007 9:05:56 PM
P: 8/9/2007 10:11:30 PM
Çã†hër§ 
Çã†hër§ 

Cut Rock
Total Posts: 402
Last Post: 9/8/2009
Member Since: 3/4/2006
 
I am interested in hearing what they have to say! I really like either the wedding band in the attached photo or wf's scattered diamond platinum wedding band..my er is platinum.

Posted:  8/9/2007 10:11:30 PM
P: 8/9/2007 11:38:33 PM
Çã†hër§ 
Çã†hër§ 

Cut Rock
Total Posts: 402
Last Post: 9/8/2009
Member Since: 3/4/2006
 
sorry, it didn't attach the first time!!!
 

 

Posted:  8/9/2007 11:38:33 PM
P: 8/10/2007 8:36:14 AM
elsie
elsie

Cut Rock
Total Posts: 178
Last Post: 12/28/2008
Member Since: 9/28/2006
 
Hey all,

Here's an answer that came up in a thread a while back. The thread is here:

http://www.pricescope.com/idealbb/view.asp?topicID=54477

But make sure you read Garry's post, which explains a lot about the WG/platinum issue (part of it is quoted below).

The platinum will wear away any type of gold worn beside it (but palladium lower carat white golds will last longest and maybe pure palladium will do better too - but I have no experiance in that (I have 32 years experiance as a jeweller at the bench for about 12 years- and an employer of 6 full time jewellers)).
The reason platinum does not wear away is that it smears (as explained) and that it seems to pick up particles of dust which make it become an abrasive. Silver has that property too to some extent and wears away gold - so silver beside platinum might even be a close to = wear - but silver is not good for diamond settings as it tarnishes under the stones.

Hope that helps!

Posted:  8/10/2007 8:36:14 AM
P: 8/10/2007 9:46:02 AM
vizsla
vizsla

Ideal Rock
Total Posts: 663
Last Post: 11/7/2009
Member Since: 8/23/2005
 
humph.. now i'm stumped.... i really wanted yellow diamonds...but only if they were in a yellow setting to set off the color...

last night we were thhhhiiiissss close to ordering the sapphire shared prong from S.P. - we really like the clean lines of a solid color... and i like a solid color to break up the 2 diamond bands.

for reference my two current rings are 3.2 mm each - the S.P. sapphire band is approx. 2mm and the yellow diamond band is 1.7mm.

i know this may sound silly... but another reason i wanted the yellow diamonds was for the sparkle factor... i admit it.. i like bling! i'm afraid the sapphires won't sparkle....

any more thoughts?

this is my current ring(s) (i have 2 of them)
 

 

Posted:  8/10/2007 9:46:02 AM
P: 8/10/2007 9:47:16 AM
vizsla
vizsla

Ideal Rock
Total Posts: 663
Last Post: 11/7/2009
Member Since: 8/23/2005
 
and this is the sapphire band
 

 

Posted:  8/10/2007 9:47:16 AM
P: 8/10/2007 9:57:10 AM
diamondseeker2006
diamondseeker2006

Ideal Rock
Total Posts: 17,609
Last Post: 11/18/2009
Member Since: 1/11/2006
 
I definitely think yellow diamonds would look better than yellow sapphires. My concern would be doing something custom without trying on the band first. Some of the SP eternity rings are set rather high and scratch the prongs of the e-ring which is unacceptable to me. Bands by Memoire and Tiffany are set low and do not scratch the e-ring.

All I can tell you is that my mother has worn a white gold anniversary ring for at least 20 years next to her platinum rings and it looks fine. It never even occurred to me to look and see if they were the same metals until I came on PS.  So maybe over 50 or 100 years you might have a wear problem. I'm just not seeing any damage after 20 or so. But I will say that I think it might be safest to have a platinum and diamond wedding band and just get the extra gold band for occasional wear. Be very careful about trying on anything you are considering having custom made with yellow diamonds, though.




~~~ When in doubt...don't.~~~

Posted:  8/10/2007 9:57:10 AM
P: 8/10/2007 10:18:14 AM
vizsla
vizsla

Ideal Rock
Total Posts: 663
Last Post: 11/7/2009
Member Since: 8/23/2005
 
thanks for the info about your mom.... i was considering getting a plain plat. band as well.. for a couple of reasons... #1 so i could have it engraved with our wedding date #2 in case i don't want to wear any bling.... and more for sentimental reasons...

my only concern with another white diamond band is that it's just going to look like a blob of diamonds without any definition between the wedding band and e-ring...

for reference this is the original eternity band i was going to order.. in platinum and yellow diamonds - what are your thoughts about the yellow diamonds being washed out by the platinum.. maybe i should just stick with that...
 

 

Posted:  8/10/2007 10:18:14 AM
P: 8/10/2007 10:30:58 AM
diamondseeker2006
diamondseeker2006

Ideal Rock
Total Posts: 17,609
Last Post: 11/18/2009
Member Since: 1/11/2006
 
My opinion is that most yellow diamonds are light yellow, and for that reason they are set in yellow gold to try and enhance the yellow color. If you go with yellow diamonds in platinum, I would think they would have to be Canary yellow and definitely not fancy light yellow. But I know very little about yellow diamonds. I just know in rounds the color has to be pretty saturated to appear yellow. See DiaGem's current post on yellow diamonds.

In rereading your original post, I now realize that you already have the two platinum/diamond bands as your e-rings. So I see why you want a contrast for the center. I think you should try to get the exact same setting for the center regardless of the color of the stones or the metal. Can you order from whoever you got the original bands from? That way you'll know the settings are the same height.




~~~ When in doubt...don't.~~~

Posted:  8/10/2007 10:30:58 AM
P: 8/10/2007 11:02:27 AM
WorkingHardforSmallRewards
WorkingHardforSmallRewards

Ideal Rock
Total Posts: 1,234
Last Post: 12/14/2008
Member Since: 6/6/2007
 
Hey gary, did you find out anymore about how platinum and palladium wear when worn together--as in say a platinum half eternity band with a palladium Ering (though my prongs are platinum so I am not too worried as long as the diamonds don't come in contact with the prongs)

(Also, in a little thread jack my apologies, I will be getting a silver ring for her to wear in front of her Ering for a while, until I can get it resized, so any words on how Silver will wear on palladium? I think I will call up knox and ask exactly how they make the rings and try to determine exactly what kind of hardness it is in Victors, though I probably said that incorrectly:) )

____________________________


"Signature-Ideal Meat

I'm Lovin it
McDonald's."

Posted:  8/10/2007 11:02:27 AM

 Previous Page Next Page 
« Earrings & necklaces...girls...can you tell me how & why you ... «» Palladium: Nobody will work on my ring, will this be a proble... »
Next Topics
Matched diamond pairs low-carat (.2-.3) stone finding Custom Design in Florida/Georgia??? Okay table/depth for this RB? My first informed purchase!! (pics) Help! What do you think of these specs? (mini - GOG review) Opinion on two stones omg! HOW do you do this?? laser inscription or not ? RB three stone ring candidates Corona Jewellers (Toronto, Canada) Another one of those clueless boyfriend questions! How much time to find perfect pair? ... DC3 and HDR What does this Pear shaped Aset Image mean Good vs bad old cut diamonds What's the best way to become a bench jeweler? Engagement Ring Rings gone! Should I get a temp? RB martini by LM- is this going overboard? I color in ascher cut stone debating on different prongs - need opinions! laser inscription? Can you please help me decide? thought I loved my diamond, but now??? Decision - GIA vs EGL stone HCA for ACA's- Br, Fr, SC? Opinions? Are these RB close to perfect? Comment on diamond purchase Altering cut - before/after pics? Findings? Various unique heads/prongs?

Jump to:



Contact Us  |  Back Home  |  Privacy Statement  |  Forum Agreement  |  Forum Policies

Ideal BB Version: 0.1.5.4.beta1 Message forum software powered by  the Ideal BB

IdealBB Badge


Pricescope - Knowledge - Diamond Prices - Tools - Resources - About

© 2000-2009 Pricescope. Terms of Use Privacy Policy Disclaimer
forum archives