Diamond Jewelry Forums

Picture Gallery

Video Gallery

|

Search |

Posted Today |

Most Active |

Help

ť Home ť

ť Diamond Prices and Grading ť

ť RockyTalky ť

ť adiamondisforever.com

adiamondisforever.com

P: 4/11/2003 1:13:53 PM
billv45 Rough Rock Total Posts: 36 Last Post: 1/8/2004 Member Since: 2/25/2003	Are the rings on adiamondisforever.com real or only virtual? I found something to what I'm looking for but can not find anything more than a pic on this site. I would like to buy of the rack if possible and advoid having something custom made. Here's a link to my virtual ring, only I would like a emerald cut center: http://www.adiamondisforever.com/dyoer/email_view/view.pl?image=FE_003_01_2_1_B.jpg&source_code=FE_003 thanks
Posted: 4/11/2003 1:13:53 PM

There are 13 replies to this message. There are 13 replies on this page.

P: 4/11/2003 3:05:29 PM
homer_j Cut Rock Total Posts: 234 Last Post: 8/7/2003 Member Since: 3/31/2003	There's a designer named Jeff Cooper that has something similar but in plat and w/o the side rounds. See below. If it tryly is an upscale designer piece, you may be better off getting it replicated by a jeweler. Maybe someone else knows more.
Posted: 4/11/2003 3:05:29 PM

P: 4/11/2003 3:09:40 PM
homer_j Cut Rock Total Posts: 234 Last Post: 8/7/2003 Member Since: 3/31/2003	Sorry forgot to add this. You can find that one at: http://www.solomonbrothers.com/Search/JewelrySearchDetails.asp?sSKU=55847 The designs on the debeers site can be replicated using that code number FE_003. I remember reading that they advise you to take that number to jeweler and they can find or make you the ring.
Posted: 4/11/2003 3:09:40 PM

P: 4/11/2003 3:17:31 PM
pqcollectibles Ideal Rock Total Posts: 3,441 Last Post: 6/18/2005 Member Since: 2/23/2003	Hey Bill! Give the guys at Trade Shop a holler and send em yer pic. LOL (You'll understand that when you see their website.) They can make your ring for you with the diamonds you want, where you want them, without charging an arm and a leg. They'll even make the ring for you and set your diamonds. Mara or Giangi, I can't remember which, bought some diamonds through eBay and had Trade Shop "custom" make her a bracelet. I seem to remember she paid Trade Shop $400 and got her bracelet under $1K total. She had high praise for the quality of their workmanship. I've seen other posts that say the same! Just a thought. Maybe it will help you get exactly the ring you want. Why use a big word when a diminutive word would be succinct! ____________________________________________________________ Just a regular person trying to be helpful. Consult a Pro prior to purchase!
Posted: 4/11/2003 3:17:31 PM

P: 4/11/2003 3:21:59 PM
Giangi Ideal Rock Total Posts: 2,530 Last Post: 10/29/2006 Member Since: 1/23/2003	Pq... It was Mara... I'm a guy _____________ Omnia Mea Mecum Porto. Giangi
Posted: 4/11/2003 3:21:59 PM

P: 4/11/2003 3:25:37 PM
billv45 Rough Rock Total Posts: 36 Last Post: 1/8/2004 Member Since: 2/25/2003	WOW! You're right on the money! A Jeff Cooper ring was the only one that was real close to what I was looking for. In fact someone right here on this board turned me on to it. The only problem is that it only comes in platinum and she wants yellow gold. The Jeff Cooper site calls the side stones "burnish set" is that the official term for this kind of side stone setting? Anyone want to venture a guess (or maybe a quote) on making a semi-mount simular to http://www.fortunoff.com/product.asp?pf%5Fid=074067992&index=1&corp%5Fgift=0&dept%5Fid=1060418 or this Jeff Cooper ring (with four burnish set side diamonds two on each side:
Posted: 4/11/2003 3:25:37 PM

P: 4/11/2003 6:04:10 PM
Mara Ideal Rock Total Posts: 27,901 Last Post: 11/22/2009 Member Since: 10/30/2002	I wish! Let me clarify..I priced out TS and they quoted me $400 for the setting of the pre-bought eBay stones ($200 for 1c of small .05c's--which I have not yet purchased btw!) into the bracelet setting similar to a pic I had sent them. So all in all around $600 for a bracelet that was selling for $1900 ($700 on 'sale' though...hah we know what that means) at Macys. I haven't done it yet, because I'm a procrastinator...but I probably will..and when I do, TS sounds like the way to go. I have see many pix on their site of projects they are working on, nice stuff!! ________________________________ "Insanity: doing the same thing over and over again and expecting different results." -Albert Einstein
Posted: 4/11/2003 6:04:10 PM

P: 4/11/2003 7:27:53 PM
stang67 Rough Rock Total Posts: 17 Last Post: 6/5/2003 Member Since: 2/27/2003	Sorry to jump in but I asked about this site awhile back and was hopeing someone could help me out too. Here is the ring I am looking at. I tried to email them as someone else stated, but got no response. http://www.adiamondisforever.com/dyoer/email_view/view.pl?image=MR_016_04_1_1_B.jpg&source_code=MR_016
Posted: 4/11/2003 7:27:53 PM

P: 4/11/2003 8:40:16 PM
noles9498 Rough Rock Total Posts: 34 Last Post: 6/3/2003 Member Since: 2/20/2003	Billv45, I know this was not the point of your post, but I was wondering...I'm not familiar with Jeff Cooper but what cut is the stone in the photo in your post -- It's not a regular emerald, is it? It looks A LOT like mine.
Posted: 4/11/2003 8:40:16 PM

P: 4/11/2003 8:43:18 PM
noles9498 Rough Rock Total Posts: 34 Last Post: 6/3/2003 Member Since: 2/20/2003	By the way, I say that because the photo doesn't have the corners of most emeralds I've seen and doesn't have that flat look of many emerald. My table is slightly convex and very slightly faceted and the result is much like the photo.
Posted: 4/11/2003 8:43:18 PM

P: 4/11/2003 9:49:02 PM
Mara Ideal Rock Total Posts: 27,901 Last Post: 11/22/2009 Member Since: 10/30/2002	Asscher cut stone? ________________________________ "Insanity: doing the same thing over and over again and expecting different results." -Albert Einstein
Posted: 4/11/2003 9:49:02 PM

P: 4/11/2003 10:45:00 PM
noles9498 Rough Rock Total Posts: 34 Last Post: 6/3/2003 Member Since: 2/20/2003	An Asscher was originally what I wanted. The stone we ended up falling in love with has qualities of both an Asscher an emerald, but the corners are perfectly square like a princess. Hard to explain...once I get the appraisal completed maybe I'll have decent photos. I can't seem to take one on my digital.
Posted: 4/11/2003 10:45:00 PM

P: 4/14/2003 10:52:27 AM
billv45 Rough Rock Total Posts: 36 Last Post: 1/8/2004 Member Since: 2/25/2003	I'm not certain just what cut that stone is but here's a link to the Jeff Cooper site: http://www.jcplatinum.com/ Anyone able to answer the original question? Do the "Source Code" displayed relate back to anything or do I have to go the custom route?
Posted: 4/14/2003 10:52:27 AM

P: 4/14/2003 12:21:43 PM
homer_j Cut Rock Total Posts: 234 Last Post: 8/7/2003 Member Since: 3/31/2003	This is straight from the debeers website design gallery at adiamondisforever.com: "Once you select a ring you will be prompted to "Print" your selection. The printout will include the specifications of your design and its source code. Bring this printout to your local jeweler so they can locate this piece of jewelry using the DPS Source Guide or find one similar to it. With a jeweler, you may then discuss further specifications, such as a larger-carat diamond, multiple side stones, as well as price." Ask your local jeweler about the ring and provide them with the source code as debeers instructed. Let s know what happens. By the way, the jcooper setting you posted with the emerald diamond is exactly what I am looking for to mount a rectangular radiant diamond. Thanks for finding that.
Posted: 4/14/2003 12:21:43 PM

Previous Page

Next Page

Ť Need help evaluating a princess cut Ť

ť A Close up ť

Next Topics
Newbie that needs advice on buying online How much was a ruby worth in Isreal in 960 BC? Help It's done !!! How much does the middle man cost? vvs2 or vs1 please help vvs2 or vs1 please help My new diamond ring Pictures. How much is enough for a engagement ring? Measurements Not The Same ..Just one more depth question? New to the board Need Help I don't want to be awkward - diamond comparision Crown Angles/Pav Angles - simulation Should I buy? ---------------------Platinum setting questions--------------------- CLEANING DIAMONDS to diamonbob & giangi can you tell by picture if its hearts and arrows? What about these stats? Half moon diamonds diamonbob, giangi and others Diamond profit % - Vendors Looking to sell old family diamond-NEED Help! Questions on the inclusions in the table area First timer diamond switch ? what to do? Change in shape of princess cut from polishing!!!!!!!!! Need help with clarity DiamCalc - please help! Rules for Clarity Grading A Close up

Jump to:

Contact Us \| Back Home \| Privacy Statement \| Forum Agreement \| Forum Policies
Ideal BB Version: 0.1.5.4.beta1	Message forum software powered by the Ideal BB

Pricescope - Knowledge - Diamond Prices - Tools - Resources - About

Š 2000-2009 Pricescope. Terms of Use Privacy Policy Disclaimer
forum archives