|
|
|
|
| ||
Diamond Jewelry Forums
 Picture Gallery
 Video Gallery
 Journal
|
|||
|
|  Search
|  Posted Today
|  Most Active
|  Help
|
||
 »
Home
»  » Diamond Prices and Grading »
 » Show Me the Ring
»  » Daniel K Union Square Custom - Has Anyone Actually Done This???
|
|
 |
Daniel K Union Square Custom - Has Anyone Actually Done This??? |
 |
| P: 4/24/2006 7:31:57 PM | |
Pokey Rough Rock Total Posts: 61 Last Post: 5/16/2007 Member Since: 2/8/2006 |
Hi. I usually hang out in the Colored Stones forum -- this is my first post outside the compound. My girlfriend wants a green e-ring center stone and I have acquired a cushion cut 2.48 ct Chrome Tourmaline concave cut by Richard Homer. I was making good progress for a while, but then I stalled out on finding a setting to put it in. Recently, I have come across the Daniel K Union Square setting which is exactly what she wants. For those of you who aren't familiar with it, it's attached below. It is unqualifiedly stunning and exactly what she's always talking about. So since it's common knowledge that Daniel K doesn't sell the setting without the stone, everyone recommends getting it custom made. My question is, has anyone actually done this and how did it turn out. One has to imagine that with a blanket policy like that, there must be lots of people clamoring for custom-made replicas and I just want to go through someone who's done it before. I live in New York and I've already met with Leon Mege but he didn't seem to be extra-familiar with the setting. Anyone else people recommend? Has anyone gotten Daniel K designs made through Whiteflash? If anyone has advice, please let me know. Also, it looks like Michael C Fina and Jacob the Jeweler are the only places to carry Daniel K settings, and Fina doesn't carry the Union Square. If anyone knows of anywhere else, I'd love to know.  of danielk.jpg)
|
| Posted: 4/24/2006 7:31:57 PM | |
|
There are 24 replies to this message. There are 24 replies on this page. |
|
| P: 4/24/2006 8:01:48 PM | |
widget Ideal Rock Total Posts: 4,254 Last Post: 12/20/2008 Member Since: 11/12/2004 |
My gosh....the ring is going to be FABULOUS!! I've been neglecting the colored stone forum, lately....have you posted the RH cut tourmaline over there? I'm going now to look! I'm sure others could be more help than I, but it seems to me it shouldn't be too hard to find someone who could pretty closely replicate that mounting. I've heard really good things about Quest, and there's a new name that's recently appeared around here: Maytal. She sure did a superb job for qqq. (check out his thread called 'The Royal Setting'.) Of course, Mark Morrell is always worth waiting for.. HTH widget
|
| Posted: 4/24/2006 8:01:48 PM | |
| P: 4/24/2006 8:06:06 PM | |
Kaleigh Ideal Rock Total Posts: 25,920 Last Post: 11/24/2009 Member Since: 11/18/2004 |
Quest!!! They did an asscher RHR for me that was inspired by Daniel K. They did an amazing job. I highly recommend them!!!
____________________________ |
| Posted: 4/24/2006 8:06:06 PM | |
| P: 4/24/2006 8:07:26 PM | |
|
Pokey Rough Rock Total Posts: 61 Last Post: 5/16/2007 Member Since: 2/8/2006 |
Here's what the tourmaline looks like. I don't know what any of those names mean so I will look into them. Thanks for the help!
|
| Posted: 4/24/2006 8:07:26 PM | |
| P: 4/24/2006 8:28:38 PM | |
|
Pokey Rough Rock Total Posts: 61 Last Post: 5/16/2007 Member Since: 2/8/2006 |
Thanks Widget. I've just emailed Maytal - that ring was amazing, you're right. And just the sort of really delicate worksmanship that I think this ring requires. So is the move to say "Hey, can you copy this designer ring?" Or do you just work with them to get something that looks *like* the union square setting but isn't exactly like it. I'd imagine that they'd be reluctant to copy something from whole cloth for fear of violating intellectual property laws. Kaleigh, when you say your ring was "inspired" by a Daniel K design, how different did it end up looking from the real thing? And do you have any advice for going through Quest to get a Daniel K ring? You can email me at pokeydonut@gmail.com if you'd like.
|
| Posted: 4/24/2006 8:28:38 PM | |
| P: 4/24/2006 8:31:22 PM | |
movie zombie Ideal Rock Total Posts: 5,223 Last Post: 11/25/2009 Member Since: 1/20/2005 |
Pokey, the ring is going to be stunning, absolutely stunning, so stunning i can't find the words to express how stunning! movie zombie "I don't feel enjoyment watching films that evoke passivity. If you need that kind of comfort, I don't understand why you wouldn't go to a spa." Chan-wook Park |
| Posted: 4/24/2006 8:31:22 PM | |
| P: 4/24/2006 8:38:39 PM | |
|
Kaleigh Ideal Rock Total Posts: 25,920 Last Post: 11/24/2009 Member Since: 11/18/2004 |
You have to alter the design by 20% for it to be legal. I added diamonds on the underwires, and that was my 20% difference. You can see my ring by doing a search for the thread titled, Look Nan has her hand on my asscher. Lisa
____________________________ |
| Posted: 4/24/2006 8:38:39 PM | |
| P: 4/24/2006 8:51:56 PM | |
|
Pokey Rough Rock Total Posts: 61 Last Post: 5/16/2007 Member Since: 2/8/2006 |
Yeah, I just read the whole asscher-pun series. The ring is unquestionably exquisite, but it sounds like Quest wasn't exactly smooth sailing all the way. Still, that ring does look incredible and it definitely has a delicate look about it. 20% huh....I guess I could add diamonds on the sides rather than how they're now just on the top of the shanks. Does anyone have any thoughts about using Leon Mege instead? He has the distinct advantage of being a five minute walk from my office. Quest is looking like the team to beat though.
|
| Posted: 4/24/2006 8:51:56 PM | |
| P: 4/24/2006 9:17:28 PM | |
|
Kaleigh Ideal Rock Total Posts: 25,920 Last Post: 11/24/2009 Member Since: 11/18/2004 |
I'd make an appointment to go see Leon. Talk to him and see what his ideas are. Then call Quest. Leon takes 4-6 weeks and Quest is closer to 4 weeks. Good luck!!!
____________________________ |
| Posted: 4/24/2006 9:17:28 PM | |
| P: 4/24/2006 9:37:26 PM | |
mrssalvo Ideal Rock Total Posts: 16,860 Last Post: 11/24/2009 Member Since: 1/3/2005 |
Quest is great but if Leon's in your backyard, I'd use Leon. His skill with pave is top notch and will be closer to the Daniel K I think. Keep in mind that it is very difficult to copy a detailed designer setting and there will probably be minor differences no matter who makes it from the original.
|
| Posted: 4/24/2006 9:37:26 PM | |
| P: 4/24/2006 9:54:44 PM | |
|
Pokey Rough Rock Total Posts: 61 Last Post: 5/16/2007 Member Since: 2/8/2006 |
Check out this thread - he got a similar ring custom made by Good Old Gold. Throw some pave on that thing and it would look very similar to the Daniel K ring. I think you're right about Leon. I called him just as he was walking out the door today, I'll try and stop by his office this week. Although his stuff is breathtaking, no doubt about it, I'm just not sure that his antiquey, Edwardian style really matches with this ring. And I understand that it's not going to be exactly the same as the Daniel K, but at least it's an aspirational goal which is more than I had yesterday.
|
| Posted: 4/24/2006 9:54:44 PM | |
| P: 4/25/2006 2:16:33 AM | |
ellewoods Cut Rock Total Posts: 328 Last Post: 1/17/2007 Member Since: 10/6/2005 |
Hi Pokey. The Daniel K Union Square was my first love, so I've researched it and Daniel K extensively. If you're still interested in a custom version, contact Whiteflash. I contacted them about doing a custom setting similar to a different Daniel K and they seemed very capable and reasonable in price. Also, I think in some cases you may be able to get the Daniel K setting without having purchased the center stone from him. Even though he officially doesn't sell his settings seperately anymore, you may find some jewelers who sell his line who can arrange for this -- I found 1 in California last year and 1 on the east coast, but I don't have their info offhand. But it doesn't hurt to ask. I asked in terms of getting an heirloom diamond already in my possession set in the Union Square setting, and was told it could be done, and I was quoted almost $11,000 (yes, thats just for the setting). But I would think that in circumstances when you already have a non-diamond center stone, that's very unique like yours, Daniel K and/or a jeweler that has a relationship with him may be willing to work with you and sell you the setting by itself. And as to the rule that a piece has to be 20% different than a previously made ring design, I don't beleive this is the case (I'm a lawyer with copyright experience). The question in copyright infringement is "substantial similarity," which doesn't have a specific definition. The amout of differences doesn't have to equal a certain percentage, but infringement vs. noninfringement is judged on a case by case basis. I wouldn't be surprised if a "rule of thumb" among jewelers in terms of copying/imitating a design is to make it at least 20% different than the first design, but legally, there isn't such a rule.
|
| Posted: 4/25/2006 2:16:33 AM | |
| P: 4/25/2006 3:01:27 AM | |
valeria101 Ideal Rock Total Posts: 14,048 Last Post: 4/30/2006 Member Since: 8/29/2003 |
Shortcut?  There is allot more details and hand shots where these come from. For an oval, the less severe lines of the first setting seem more appealing, although I would think that the second is a closer relative to your initial choice. Perhaps some degree of custom treatment could be applied to either (e.g. setting diamonds in the basket of the second ring etc.). Worth asking, IMO. With quite a few split shank pave settings around, there should be a range of choices readily available. This one is a ring by Gumuchian, at Pearlmans': There are a few more related designs in the same collection, some already on display with oval center stones and all priced w/o center. Then... the last one below seems to have taken substantially more work than the DK model...Not sure how many places would handle such detailed hand made pave. And custom work... means detail can always change without question. Nothing wrong with donating 5-6k or so the the publicity campaign for the 'Daniel K.' diamond brand, of course.  At least as long as the guys keep it going, a few more folks will know exactly how much the ring cost... and after, it would still be an exquisite piece in its own right regardless of hype.   Ana "The greatest experts are only as good as the sum total of what they have seen." [Souren Melikian] |
| Posted: 4/25/2006 3:01:27 AM | |
| P: 4/25/2006 9:06:20 AM | |
*~*Danielle*~* Ideal Rock Total Posts: 559 Last Post: 11/25/2009 Member Since: 6/24/2005 |
Date: 4/24/2006 9:54:44 PM Author: Pokey Check out this thread - he got a similar ring custom made by Good Old Gold. Throw some pave on that thing and it would look very similar to the Daniel K ring. I think you're right about Leon. I called him just as he was walking out the door today, I'll try and stop by his office this week. Although his stuff is breathtaking, no doubt about it, I'm just not sure that his antiquey, Edwardian style really matches with this ring. And I understand that it's not going to be exactly the same as the Daniel K, but at least it's an aspirational goal which is more than I had yesterday. Hey Pokey - that is my friend's ring...It was custom made by GOG & it was inspired by the Daniel K you posted above. It's very beautiful & she loves her ring! The pave from the prongs & basket were removed intentionally, but I think for something like that you'd want to contact a designer who is an expert with pave (like Leon) or a person who has a good policy on replacing inevitably lost stones (like Quest). If you'd like some more specifics on my friend's ring - let me know. She posts on here very infrequently, but I can get her attention  . Good luck in your search - the stone is BEAUTIFUL!
|
| Posted: 4/25/2006 9:06:20 AM | |
| P: 4/25/2006 1:23:42 PM | |
***SplitShanksRock*** Rough Rock Total Posts: 61 Last Post: 9/5/2008 Member Since: 1/22/2006 |
Hi Pokey- I'm the friend :). That's my super sparkler! I just read through really quick, but GOG did a really great job on my ring. I loved the Daniel K but I thought the pave on the sides (and the price) was a little much for my taste so they made it just what I wanted. Just sparkly enough! Let me know if you have any specific questions. I will tell you it was A LOT less than that $11,000 for just the setting that someone else said. Gotta go for now! -Erin
|
| Posted: 4/25/2006 1:23:42 PM | |
| P: 4/25/2006 1:36:28 PM | |
mara54 Cut Rock Total Posts: 273 Last Post: 11/2/2008 Member Since: 1/19/2006 |
Date: 4/24/2006 8:07:26 PM Wow, love the green stone, it is going to look beautiful in any ring... I love green rings....Author: Pokey Here's what the tourmaline looks like. I don't know what any of those names mean so I will look into them. Thanks for the help! 
|
| Posted: 4/25/2006 1:36:28 PM | |
| P: 4/25/2006 2:38:40 PM | |
Scintillating Ideal Rock Total Posts: 1,128 Last Post: 7/24/2009 Member Since: 8/10/2005 |
I think Leon Mege would be my #1 choice for that setting - especially since you are in NYC! Just because he isn't familiar with Daniel K. rings doesn't mean he wouldn't do an EXCELLENT job. (He's a very busy man, he really doesn't have the time to follow other jewelers designs.) Just show him some photographs of what you'd like - he'll be able to reproduce it. I think he's the only one who could do that basket and those prongs justice. His work is extraordinary - equal or better than Daniel K quality. (But much less expensive.) Go see the Daniel K setting in person and you'll see what I mean. Leon's bead work for the pave is absolutely precise and minute. Scintillating...
|
| Posted: 4/25/2006 2:38:40 PM | |
| P: 4/25/2006 3:22:48 PM | |
|
Pokey Rough Rock Total Posts: 61 Last Post: 5/16/2007 Member Since: 2/8/2006 |
Just got back from Jacob the Jeweler's -- the woman there said that they could absolutely get Daniel K to make me the setting around a center stone if I give them the measurements of the stone, they are happy to do it. Clearly, one saleswoman's opinion doesn't constitute Daniel K policy, but assuming for the moment that she's right, now I have to decide between spending "around ten grand" for a Daniel K setting or getting someone like Leon or Maytal or Whiteflash or Quest to custom-design a replica for me. The advantage of the latter plan is that it would cost significantly less, but the disadvantage is that one has to put a lot of faith in a designer's ability to do similar level work. Plus, as has been pointed out, it never looks exactly the same. And let me tell you, in person that ring looks spectacular. Sure, I'd be paying $11,000 for a setting, which does seem a little absurd, but my girlfriend did me a huge financial favor by not wanting a diamond. Plus, c'mon, who doesn't want to have a ring from the same store as Biggie Smalls.
|
| Posted: 4/25/2006 3:22:48 PM | |
| P: 4/25/2006 4:21:54 PM | |
|
Scintillating Ideal Rock Total Posts: 1,128 Last Post: 7/24/2009 Member Since: 8/10/2005 |
Date: 4/25/2006 3:22:48 PM Author: Pokey Sure, I'd be paying $11,000 for a setting, which does seem a little absurd. yes, yes it does. I suggest you go back and have another meeting with Leon Mege, show him the pics, look at his portfolio, ask to see something he's working on, etc... See if that makes you feel better. Scintillating...
|
| Posted: 4/25/2006 4:21:54 PM | |
| P: 4/26/2006 7:35:20 PM | |
lizz Ideal Rock Total Posts: 1,241 Last Post: 12/15/2008 Member Since: 6/7/2005 |
This one from dimendscaasi.com is significantly less than $11,000.
|
| Posted: 4/26/2006 7:35:20 PM | |
| P: 4/26/2006 10:44:33 PM | |
AntiguaBride Cut Rock Total Posts: 325 Last Post: 6/12/2006 Member Since: 7/1/2005 |
Who is biggie smalls? Personally, I'd rather have a unique, custom designed ering based heavily on one of my favorite settings than an $11k setting that will be exactly like someone else's. But that's just me. (And then I'd rather take the couple of thousands of dollars left over and spend it on something else!) |
| Posted: 4/26/2006 10:44:33 PM | |
| P: 4/26/2006 10:58:43 PM | |
|
mrssalvo Ideal Rock Total Posts: 16,860 Last Post: 11/24/2009 Member Since: 1/3/2005 |
with pave rings, I would recommed using a jeweler that handmakes them rather than casting. I have done a fair amount of research and even asked why in a thread. You can read about it here if you're interested. cast rings will be cheaper but can have porosity issues and having a bunch of holes in the metal for the stones doesn't help it's stuctual integrity. Just my 02.
|
| Posted: 4/26/2006 10:58:43 PM | |
| P: 4/26/2006 11:53:40 PM | |
|
Scintillating Ideal Rock Total Posts: 1,128 Last Post: 7/24/2009 Member Since: 8/10/2005 |
Date: 4/26/2006 10:58:43 PM Author: mrssalvo with pave rings, I would recommed using a jeweler that handmakes them rather than casting. I have done a fair amount of research and even asked why in a thread. You can read about it here if you're interested. cast rings will be cheaper but can have porosity issues and having a bunch of holes in the metal for the stones doesn't help it's stuctual integrity. Just my 02. Really good advice Mrs. S!!! Scintillating...
|
| Posted: 4/26/2006 11:53:40 PM | |
| P: 6/11/2006 12:06:56 AM | |
MINE!! Ideal Rock Total Posts: 3,287 Last Post: 1/22/2007 Member Since: 2/25/2005 |
POkey.. apparently I missed this thread.. wow... I am excited to see what you end up getting together.. WOW>...
|
| Posted: 6/11/2006 12:06:56 AM | |
| P: 6/11/2006 10:30:40 AM | |
Kaylyn Cut Rock Total Posts: 145 Last Post: 8/10/2006 Member Since: 8/21/2005 |
1. I saw the first picture of the DK on this thread. 2. I imagined it with a chrome tourmaline in it. 3. My eyeballs fell out of my head at just the thought of it.  
|
| Posted: 6/11/2006 10:30:40 AM | |
 Previous Page
|
Next Page 
|
Contact Us | Back Home | Privacy Statement | Forum Agreement | Forum Policies | |
| Ideal BB Version: 0.1.5.4.beta1 | Message forum software powered by the Ideal BB |
| |
Pricescope -
Knowledge -
Diamond Prices -
Tools -
Resources -
About
© 2000-2009 Pricescope. Terms of Use Privacy Policy Disclaimer
forum archives
