|
|
|
|
| ||
Diamond Jewelry Forums
 Picture Gallery
 Video Gallery
 Journal
|
|||
|
|  Search
|  Posted Today
|  Most Active
|  Help
|
||
 »
Home
»  » Diamond Prices and Grading »
 » RockyTalky
»  » LOOKING FOR A CUSHION CUT, I NEED YOU HELP!!!!
|
|
 |
LOOKING FOR A CUSHION CUT, I NEED YOU HELP!!!! |
 |
| P: 7/11/2005 12:54:03 PM | |
TimothyLYork Rough Rock Total Posts: 10 Last Post: 6/20/2006 Member Since: 7/8/2005 |
Hello everyone! I am in the process of looking for a cushion cut diamond. The ultimate goal is to have it set in a Tiffany Style Legacy setting. I am looking to spend approximately between $7,000 and $10,000 on the stone itself. I am definitely a novice when it comes to looking at diamonds. From what I have gathered so far, is that I should not go below G color and SI1 clarity. I should also try to obtain a diamond with and ideal, very good or good cut. But my questions have to do with depth/table ratio. What should I look for here? Also, when it comes to symmetry, what am I looking for? Should a diamond have fluorescence? If so, how much? Also, what does it mean when they say the diamond has an extra facet? What is the difference between the modern cut and other types of cuts out there? I would love to get a hold of a diamond that ranges between 1.3-2.0 ct. if possible. If anyone can help me with the specifics of this type of diamond, please let me know. Also, if anyone knows of a good website or retailers please let me know! Thanks for all of your help!
|
| Posted: 7/11/2005 12:54:03 PM | |
|
There are 8 replies to this message. There are 8 replies on this page. |
|
| P: 7/11/2005 1:16:32 PM | |
moremoremore Ideal Rock Total Posts: 6,825 Last Post: 2/9/2009 Member Since: 3/15/2004 |
I just love me some cushions!!! :) First of all, who says you can't go below a G? (I agree, but that's just me)... Perhaps you and your girl are not color sensitive. I would at least go look at some lower colors! Second, cushions need to be seen. There are just so many out there! Do you like an antique look? A more modern look? I just responded to another post about the modern cushion...here is the link...(oops, never mind, that was you LOL) Nice ice writes this about the mods: "Our cushion cut diamonds are produced to the highest standards and have been graded by the GIA Gem Trade Laboratory (GIA-GTL) as having Excellent Polish & Symmetry which is the highest rating available from GIA Laboratory for these characteristics and is quite difficult to achieve!" And here is what the cert will look like. This is what DBOF writes: Some of the cushion cuts of the past were more like old mine cuts. This is the modern version. These are cut with a high degree of precision and balance of proportions that gives them a mesmerizing attractivness. The faceting pattern is much like a round but more elongated BUT, not only the modern cushions are beautiful! Do you like bigger flashes or do you like the scintillation and fire of round stones more? (I liken the modern to the sparkle of a round) As for the depth, go with the flow. If it's really high, your stone may look small. If it's too low, your cut may be off. I like mid 60s so I don't get a small stone for the carat weight. As for table, no way to tell. But it's not a bad start to look for table less than depth. But that's no guarantee. You need to see the stones and work with a good vendor. Mods are expensive too. Just a thought. I insist on at least VG symmetry, but I would absolutely look at a stone with good (if I wasn't only looking for a modern). Flourescence, unless it's strong blue, is nothing to think about. Not an issue. If you have a colorless stone in the D E F range, maybe even lower, and you have strong blue, you'll need to see the stone to make sure it's not cloudy or milky. In fact, if I was going G or lower, I'd LOVE some!!! May help to make the stone look whiter face up. FIND A GOOD VENDOR!!!! THAT MAKES EVERYTHING EASY!!! :) edited: Didin't realize that you had that other post here. You should just bump that one up instead. ______________________________ Stewart says: I'm good enough. I'm smart enough. And doggon'it, people like me. |
| Posted: 7/11/2005 1:16:32 PM | |
| P: 7/11/2005 1:19:38 PM | |
|
moremoremore Ideal Rock Total Posts: 6,825 Last Post: 2/9/2009 Member Since: 3/15/2004 |
cert ______________________________ Stewart says: I'm good enough. I'm smart enough. And doggon'it, people like me. |
| Posted: 7/11/2005 1:19:38 PM | |
| P: 7/11/2005 1:36:28 PM | |
|
TimothyLYork Rough Rock Total Posts: 10 Last Post: 6/20/2006 Member Since: 7/8/2005 |
What is a sewer pipe and open hole cutlet?
|
| Posted: 7/11/2005 1:36:28 PM | |
| P: 7/11/2005 1:57:29 PM | |
|
moremoremore Ideal Rock Total Posts: 6,825 Last Post: 2/9/2009 Member Since: 3/15/2004 |
Sewer pipe! LOL. That just means the stone has a very large culet. Some people actually like the look that you see with a lot of antique cuts Check out this page and you can see the open culet on that one stone. http://www.goodoldgold.com/cushion.htm Note that the top (main) pic is a modern cushion. But the facet pattern is not shown for that one and the tutorial doesn't go through that. But there is a link to them at the TOP of the page. Also note that they are NOT the H&A square cushions e/t they look the same on the cert. Ohh, there's a delicious 1.5 E Vs2 on there! You'll see that that's more expensive than other cushions that are not "modern"...But you may think more traditional cushion cuts are just as if not more pretty! Check em out! ______________________________ Stewart says: I'm good enough. I'm smart enough. And doggon'it, people like me. |
| Posted: 7/11/2005 1:57:29 PM | |
| P: 7/11/2005 4:27:02 PM | |
|
TimothyLYork Rough Rock Total Posts: 10 Last Post: 6/20/2006 Member Since: 7/8/2005 |
Is a cutlet an actual hole through the diamond?
|
| Posted: 7/11/2005 4:27:02 PM | |
| P: 7/11/2005 4:52:15 PM | |
JohnQuixote Ideal Rock Total Posts: 5,212 Last Post: 5/24/2008 Member Since: 9/9/2004 |
No hole. John |
| Posted: 7/11/2005 4:52:15 PM | |
| P: 7/11/2005 5:00:08 PM | |
belle Ideal Rock Total Posts: 10,287 Last Post: 4/3/2008 Member Since: 11/19/2004 |
Date: 7/11/2005 4:27:02 PM no, it is the bottom of the diamond where the facets meet. usually, you want to find a diamond that has a 'small' or 'pointed' culet, to minimize light leakage.Author: TimothyLYork Is a cutlet an actual hole through the diamond? 
|
| Posted: 7/11/2005 5:00:08 PM | |
| P: 7/11/2005 11:33:52 PM | |
|
TimothyLYork Rough Rock Total Posts: 10 Last Post: 6/20/2006 Member Since: 7/8/2005 |
Is a modern cut more rectangular or square?
|
| Posted: 7/11/2005 11:33:52 PM | |
 Previous Page
|
Next Page 
|
Contact Us | Back Home | Privacy Statement | Forum Agreement | Forum Policies | |
| Ideal BB Version: 0.1.5.4.beta1 | Message forum software powered by the Ideal BB |
| |
Pricescope -
Knowledge -
Diamond Prices -
Tools -
Resources -
About
© 2000-2009 Pricescope. Terms of Use Privacy Policy Disclaimer
forum archives
