Diamond Jewelry Forums

Picture Gallery

Video Gallery

|

Search |

Posted Today |

Most Active |

Help

ť Home ť

ť Diamond Prices and Grading ť

ť RockyTalky ť

ť Design Questions (Help!) - Melee & Halos

Design Questions (Help!) - Melee & Halos

P: 4/22/2005 11:28:00 AM
NoonersMom Cut Rock Total Posts: 353 Last Post: 6/16/2005 Member Since: 12/14/2004	Now that I've narrowed down the stone to two choices (viewing on Tuesday as that's the earliest they can accomodate) I need to determine a few design specifications. I am having the Ritani Endless Love center round center with bezel set halo, pave shank custom made by WF. The band is going to be 2mm (if I bump it up to 2.3mm the melee size will change from 1.4 to 1.7 pointers I believe). However, I have no clue what the halo width should be. Can you please make recommendations? I want the halo to compliment the center stone, not complete. Any recommendations are greatly appreciated. Center stone will either be 1.12 or 1.265. Thanks in advance!
Posted: 4/22/2005 11:28:00 AM

There are 12 replies to this message. There are 12 replies on this page.

P: 4/22/2005 2:09:36 PM
FireGoddess Ideal Rock Total Posts: 12,145 Last Post: 3/23/2009 Member Since: 1/25/2005	Hmmm - I think chellebelle's ring is a stunning example of ideal proportions between the center stone and the halo in her Ritani Endless Love ring. In her thread here, she states that the center stone is about 1.15 ct, but I didn't find any reference to the melee. My pear stone is 1.5 ct and I have 2 pointers in my halo. Thread is here. Diamondlil's pear stone is 2 ct and she has 1 pointers in her halo. Thread for that is here. And a pic of a ring closest to what you're probably looking at is chellebelle's below...chelle - any idea of the size of your melee??
Posted: 4/22/2005 2:09:36 PM

P: 4/22/2005 10:03:09 PM
mamchris Rough Rock Total Posts: 79 Last Post: 1/21/2007 Member Since: 3/3/2005	I've been doing the same research myself, I have a 1 carat rb and I have been trying to figure out the size of the melee. I have been trying to determine the overall radius that I want to be about 11mm so that the stone will give the appearance of a much larger ring. Remember shrinkage!! So I don't want my halo to be too small, but I don't want the center stone to look too tiny either. Take a look at this Ritani Ring, it is part of the masters collection. The shank is wider on this than the endless love collection it is about 3mm+. It has princess diamonds hidden under the shoulders and center diamond. The ring is very pretty in person. The melee is a 1 pointer and the overall radius inc. the center diamond is 10mm+. I have been trying to copy this from the ritani site, but can't it is under the bridal section, ring # Engagement - 1RD2122B.
Posted: 4/22/2005 10:03:09 PM

P: 4/23/2005 9:38:21 AM
valeria101 Ideal Rock Total Posts: 14,048 Last Post: 4/30/2006 Member Since: 8/29/2003	Date: 4/22/2005 1039 PM Author: mamchris I've been doing the same research myself, I have a 1 carat rb and I have been trying to figure out the size of the melee. The overall radius that I want to be about 11mm ... I can do this better with pen & paper - hopefully the stark electronic doodle will do for starters. A version of the ring in the picture, but with a modern brilliant and slightly larger halo is listed HERE: 0.75 cts round with a 12mm wide halo. That one looks a bit much IMO. Your version with a larger center should look great. Oh well... just a thought. Ana "The greatest experts are only as good as the sum total of what they have seen." [Souren Melikian]
Posted: 4/23/2005 9:38:21 AM

P: 4/23/2005 10:10:47 PM
mamchris Rough Rock Total Posts: 79 Last Post: 1/21/2007 Member Since: 3/3/2005	Ana, You are the best. Always helping and you know so much. You are always right on, I don't know how you do it with all your graphics, but I learn alot from you. Thanks.
Posted: 4/23/2005 10:10:47 PM

P: 4/23/2005 11:10:59 PM
mamchris Rough Rock Total Posts: 79 Last Post: 1/21/2007 Member Since: 3/3/2005	Check out this link http://www.ritani.com/flash/view_page.php?style_num=1RD2122B for a picture of the Ritani Halo, this is the 10mm halo ring, it has 66 pts of small diamonds including the band. The center stone is .96 ct. The halo is 10mm. I don't know what size the melee is in the halo but I have seen this ring in person and it is balanced very nicely. Maybe Ana can give us an estimate as to the pointer size in the melee.
Posted: 4/23/2005 11:10:59 PM

P: 4/24/2005 1:22:58 AM
valeria101 Ideal Rock Total Posts: 14,048 Last Post: 4/30/2006 Member Since: 8/29/2003	Date: 4/23/2005 11:10:59 PM Author: mamchris Maybe Ana can give us an estimate as to the pointer size. Glad to help, if and when I can I really could not guess what size are the diamond dots in the Ritani Halo... the diamonds on the shank are taperred in size away from the center stone which does not allot a simple guess. However, they should be very small - smaller than those in the ring from Fay attached to the previous post. If that picture represents a 1 carat stone, each diamond in the halo could not be more than 1mm (perhaps even smaller). So those are pointers, I would think. Anyway, the one who has to answer this is the jeweler who will make the ring. Ana "The greatest experts are only as good as the sum total of what they have seen." [Souren Melikian]
Posted: 4/24/2005 1:22:58 AM

P: 4/24/2005 1:51:13 AM
valeria101 Ideal Rock Total Posts: 14,048 Last Post: 4/30/2006 Member Since: 8/29/2003	You might want to follow the story of the rings of "Firegodess" ... she changed her 1.5cts pear from a thick to a thin halo. The thick version is on this thread and the thin here and on her avatar now (hope you do not mind what your pictures have become, FireGodess) Ana "The greatest experts are only as good as the sum total of what they have seen." [Souren Melikian]
Posted: 4/24/2005 1:51:13 AM

P: 4/25/2005 4:17:49 PM
NoonersMom Cut Rock Total Posts: 353 Last Post: 6/16/2005 Member Since: 12/14/2004	Fire, Mam, Ana.....thank you all for the comments & great advice! (Fire, love the final version of your custom work. It's beautiful) Ana I am blown away by all of the thoughts & recommendations you posted. Thank you for the advice & effort. The mock ups are great! I agree that the halo should be small & not large. Personally, if I am going to go to the trouble of finding an ideal/super ideal cut I don't want to detract from it. I just didn't know if the halo should be equal to the band or less than the band. I did a bit of measuring this week-end & decided that I like the look of a 1mm halo with a 7.02 center (imagine me with the ruler, paper, pen & scissors out...lol). I asked WF if it's possible to do a mock up. Denise is checking into it. Hopefully in the very near future I will be able to post pictures of the final work. :) Thanks again!
Posted: 4/25/2005 4:17:49 PM

P: 4/25/2005 4:40:37 PM
Kaleigh Ideal Rock Total Posts: 25,896 Last Post: 11/22/2009 Member Since: 11/18/2004	Can't wait to see it, I'm sure it will be awesome!! ____________________________ Piece of cake and a candle. ng gift
Posted: 4/25/2005 4:40:37 PM

P: 4/25/2005 4:44:08 PM
mrssalvo Ideal Rock Total Posts: 16,856 Last Post: 11/20/2009 Member Since: 1/3/2005	i'm sure it will AWESOME. Can't wait to see pics. keep us posted with pics of the wax too. i love seeing those ----------------------------- A deal is only a deal if you are getting exactly what you want.
Posted: 4/25/2005 4:44:08 PM

P: 4/25/2005 5:20:14 PM
FireGoddess Ideal Rock Total Posts: 12,145 Last Post: 3/23/2009 Member Since: 1/25/2005	I think everyone has given you some great advice. A mockup, if possible from WF, would be absolutely ideal! I have to say, I noticed immediately when I had the thick halo how much it really detracted from the stone, but I had no idea just how MUCH it made my stone look smaller and less the focal point until the two pictures were side by side in Ana's post. This is definitely a decision that requires just as much thought as you're putting into it here! Good luck.
Posted: 4/25/2005 5:20:14 PM

P: 4/25/2005 5:35:43 PM
DiamondLil Ideal Rock Total Posts: 2,405 Last Post: 6/1/2006 Member Since: 6/8/2003	NoonersMom, I'm sure WF will come through with just the right proportions. I like the stones for the halo to be the same or smaller than that of the band. FG's side-by-side pics are a perfect example of why. If the halo is too thick and heavy for the center stone, it detracts from both the main diamond and the delicate shank. Keep us posted. DiamondLil DiamondLil ________________ "Diamonds are nothing more than chunks of coal that stuck to their jobs."
Posted: 4/25/2005 5:35:43 PM

Previous Page

Next Page

Ť New AGS and GIA cut grades Ť

ť Old Tiffany setting, new diamond ť

Next Topics
Anyone familiar with this vendor?? Anyone know anything about Kaprielian?? Is this true about Radiants?? photos of poorly set diamonds? Eternity Bands and Engraving Jewelry Appraisal Services in Houston rocks! Help on specs for 2 Radiants! Also, Radiants from ERD? Independent Appraiser - Los Angeles How to Set a 2+ ct OEC? Thanks for all your help! Rave for SuperbCert and Mark Morrell understanding a sarin on a marquise bucket setting for ec Hearts On Fire Dream cut diamonds Thoughts on this diamond? engagement setting advice NYC Jeweler open on weekends? Setting Round-up what do you think of this band w/surprise diamonds? Am I Cheap Eternity Band Prong roughness Help for inexperience diamond buyer(earrings, dirtcheapdiamonds.com) No success in upgrading my 1st e-ring lost my engagement ring - now what? Ahhhhhh! Tiff Diamond Necklace new setting hurts Earrings - Which pair of stones ? Earrings - Which pair of stones ? Ideal Princess cut HCA Numbers What am I missing? Asha vs. Freecz.com --which would look closest to the real thing?

Jump to:

Contact Us \| Back Home \| Privacy Statement \| Forum Agreement \| Forum Policies
Ideal BB Version: 0.1.5.4.beta1	Message forum software powered by the Ideal BB

Pricescope - Knowledge - Diamond Prices - Tools - Resources - About

Š 2000-2009 Pricescope. Terms of Use Privacy Policy Disclaimer
forum archives