Diamond Jewelry Forums

Picture Gallery

Video Gallery

|

Search |

Posted Today |

Most Active |

Help

ť Home ť

ť Diamond Prices and Grading ť

ť Show Me the Ring ť

ť Pear shaped engagement rings AND wedding bands?

Pages: 1 of 2: [1] 2 >

Pear shaped engagement rings AND wedding bands?

P: 2/16/2005 3:16:52 PM
northstar_78 Cut Rock Total Posts: 173 Last Post: 11/10/2005 Member Since: 12/20/2004	Any nice pictures of a complete set? All I've been able to find are bands that are curved to fit around the base of the pear. How can you avoid doing that? If I'm leaning toward a pear and I'd really like a matching wedding band to go with it that can be worn alone any suggestions? What...you mean I have to decide!?!
Posted: 2/16/2005 3:16:52 PM

There are 35 replies to this message. There are 30 replies on this page.

P: 2/16/2005 3:29:53 PM
FireGoddess Ideal Rock Total Posts: 12,145 Last Post: 3/23/2009 Member Since: 1/25/2005	Two quick ideas come to mind...the first is to have the pear set as a solitaire so that the band will be able to stack next to it (see below) due to the angle of the prongs. The second is to do what I'm trying to do now...have the pear set high so that the wedding ring will stack next to the shank of the e-ring, but the wide part of the pear will actually come over the wedding ring...it will look like there are 2 bands underneath your pear. I don't have a pic of this yet. Just the first option, which was my original setting. Just the first 2 things that come to mind...I hope I'm understanding what you mean by "matching" wedding band...
Posted: 2/16/2005 3:29:53 PM

P: 2/16/2005 3:33:53 PM
northstar_78 Cut Rock Total Posts: 173 Last Post: 11/10/2005 Member Since: 12/20/2004	Yes you are! Sounds good to me... What...you mean I have to decide!?!
Posted: 2/16/2005 3:33:53 PM

P: 2/16/2005 3:35:31 PM
cflutist Ideal Rock Total Posts: 1,370 Last Post: 7/20/2006 Member Since: 7/12/2004	Date: 2/16/2005 3:16:52 PM Author:northstar_78 Any nice pictures of a complete set? All I've been able to find are bands that are curved to fit around the base of the pear. How can you avoid doing that? If I'm leaning toward a pear and I'd really like a matching wedding band to go with it that can be worn alone any suggestions? My eternity band (1.00 TW D-E/VVS stones) fits flush against my e-ring (3.01 F-SI1 pear + .70 TW F-G/VS). If you look carefully at the head, you will see that it protrudes outward from the ring above where the w-ring would go.
Posted: 2/16/2005 3:35:31 PM

P: 2/16/2005 3:38:38 PM
northstar_78 Cut Rock Total Posts: 173 Last Post: 11/10/2005 Member Since: 12/20/2004	Okay I have to stop drooling...hehe! There's a ring that I saw in an earlier post and I had to go to the icestore.com website to check it out. favorites...http://www.icestore.com/gallery/diamond_ring_gallery_detail.asp?ID=23 Do you think a small pear would work well in that setting too? Or maybe straight baguettes instead of tapered? What...you mean I have to decide!?!
Posted: 2/16/2005 3:38:38 PM

P: 2/16/2005 4:03:51 PM
JCJD Ideal Rock Total Posts: 1,977 Last Post: 5/8/2007 Member Since: 9/8/2004	Date: 2/16/2005 3:38:38 PM Author: northstar_78 Okay I have to stop drooling...hehe! There's a ring that I saw in an earlier post and I had to go to the icestore.com website to check it out. favorites...http://www.icestore.com/gallery/diamond_ring_gallery_detail.asp?ID=23 Do you think a small pear would work well in that setting too? Or maybe straight baguettes instead of tapered? I think if you want to do a pear in this setting, it would have to be a custom job to remove the bottom v-prong and change the side prongs too. It might end up being a 4-prong setting, and it's up to you if you're comfortable with that. Here's some mock-ups I did quickly to illustrate what I'm talking about: Here, you'll want to change this v-prong to a straight prong for the round end of the pear, and to keep the profiles looking similar.
Posted: 2/16/2005 4:03:51 PM

P: 2/16/2005 4:07:54 PM
JCJD Ideal Rock Total Posts: 1,977 Last Post: 5/8/2007 Member Since: 9/8/2004	Here's the other picture. Again, to keep the profiles looking the same, I would remove the 4 side prongs and instead put in one prong in the center (would have to move the baguette down the shank a bit). I personally would be more comfortable with only 4 prongs than with 6 prongs with a small pear (how small out of curiosity??)so the prongs don't overwhelm the stone, but that's simply a matter of taste. Otherwise, to keep the side profiles similar (cause they're scrumptious on the original design, IMO!!), you'd have 3 prongs sitting pretty close together on the rounded end and 3 other prongs, including your v-prong, not so close together on the pointed end. Hope that helps you visualize a bit!!!
Posted: 2/16/2005 4:07:54 PM

P: 2/16/2005 4:08:37 PM
valeria101 Ideal Rock Total Posts: 14,048 Last Post: 4/30/2006 Member Since: 8/29/2003	Date: 2/16/2005 3:38:38 PM Author: northstar_78 Do you think a small pear would work well in that setting too? Or maybe straight baguettes instead of tapered? It looks rather dainty to me... can't see whay not! Ana "The greatest experts are only as good as the sum total of what they have seen." [Souren Melikian]
Posted: 2/16/2005 4:08:37 PM

P: 2/16/2005 4:14:38 PM
FireGoddess Ideal Rock Total Posts: 12,145 Last Post: 3/23/2009 Member Since: 1/25/2005	FYI, when I was looking at the website, I noticed that that particular ring is not for sale, it's an example of a ring someone else had done, and you can work with them to customize your own, so I don't think you need to worry about the prongs in the way JCJD has mentioned. If whomever won't make it with a pear head (which I'm sure they would) then JCJD's points are a concern. You also have options in that regard...6 prong versus 5 prong plus v-tip, etc. I love the engraving on the shank and how the band tapers at the head. I think a pear would look nice in it!
Posted: 2/16/2005 4:14:38 PM

P: 2/16/2005 4:15:57 PM
northstar_78 Cut Rock Total Posts: 173 Last Post: 11/10/2005 Member Since: 12/20/2004	You rock! Thanks so much...as for altering the prongs I'm fine with that. In fact, there are several other aspects of the ring I'd like to change...I do think it sits a bit high and all that elaborate scrollwork underneath isn't what I want. I also would want to have the shank shaped a little bit more like a square...but not a true Euroshank. I'm so glad that I found this picture on pricescope...I've never seen anything like it and its giving me good ideas. What...you mean I have to decide!?!
Posted: 2/16/2005 4:15:57 PM

P: 2/16/2005 4:30:25 PM
JCJD Ideal Rock Total Posts: 1,977 Last Post: 5/8/2007 Member Since: 9/8/2004	No problem! Found this beauty on that same site - lacks the incredible engraving, but it is a pear with baguettes! http://www.icestore.com/gallery/diamond_ring_gallery_detail.asp?ID=16
Posted: 2/16/2005 4:30:25 PM

P: 2/16/2005 4:33:46 PM
FireGoddess Ideal Rock Total Posts: 12,145 Last Post: 3/23/2009 Member Since: 1/25/2005	oooooooohhhh JCJD...pretty....look at that pear! YUMMY!!!! (I should have enlisted you to help me find new settings when I was looking!)
Posted: 2/16/2005 4:33:46 PM

P: 2/16/2005 4:47:03 PM
JCJD Ideal Rock Total Posts: 1,977 Last Post: 5/8/2007 Member Since: 9/8/2004	Date: 2/16/2005 4:33:46 PM Author: FireGoddess oooooooohhhh JCJD...pretty....look at that pear! YUMMY!!!! (I should have enlisted you to help me find new settings when I was looking!) LOL!!! Any excuse to search for more eye-candy!!! Not like I'm working right now or anything! Yeah right!!!!! Anymore updates on your revised setting? Have you seen a wax yet? Now, this is not a completed wedding set, but imagine (for now ) a plain satin-finish platinum wedding-band with my (IMNSHO!!!) GRGEUS e-ring!!! When FH and I have money someday, I'll get a pave or shared prong 3/4 or 1/2 eternity diamond band.
Posted: 2/16/2005 4:47:03 PM

P: 2/16/2005 4:54:11 PM
cflutist Ideal Rock Total Posts: 1,370 Last Post: 7/20/2006 Member Since: 7/12/2004	Date: 2/16/2005 4:30:25 PM Author: JCJD No problem! Found this beauty on that same site - lacks the incredible engraving, but it is a pear with baguettes! http://www.icestore.com/gallery/diamond_ring_gallery_detail.asp?ID=16 Now that pear is large, but there is something about the girdle outline that does not appeal to me.
Posted: 2/16/2005 4:54:11 PM

P: 2/16/2005 5:00:05 PM
northstar_78 Cut Rock Total Posts: 173 Last Post: 11/10/2005 Member Since: 12/20/2004	Whoops...I forgot to say that I'm thinking of a center stone around one carat...I have a size 3.75 finger so I don't want to go too big... What...you mean I have to decide!?!
Posted: 2/16/2005 5:00:05 PM

P: 2/16/2005 7:21:41 PM
pearcrazy Ideal Rock Total Posts: 1,438 Last Post: 11/27/2008 Member Since: 5/16/2004	My rings totally don't match. I had the 7 stone ring long before the semi-mount. I originally wore my .54 pear in a 6 prong solitaire with the 7 stone wedding band. Upgraded setting to the one shown and then upgraded center stone to the 1.12 pear I have now. One of these days I think I'll start at the beginning and get them all to match!! When I'm working I just wear the 7 stone band. If the pear is prong set high enough most any band should fit well. "Have you ever noticed, anyone going slower than you is an idiot, and anyone going faster than you is a maniac"--George Carlin
Posted: 2/16/2005 7:21:41 PM

P: 2/17/2005 9:28:27 AM
valeria101 Ideal Rock Total Posts: 14,048 Last Post: 4/30/2006 Member Since: 8/29/2003	A basket setting (like the one with the baguettes) doesn't seem to allow the w-band to sit totally flush with the ring. It could - I guess, if they didn't decide to make the gallery so wide. Ana "The greatest experts are only as good as the sum total of what they have seen." [Souren Melikian]
Posted: 2/17/2005 9:28:27 AM

P: 2/18/2005 8:41:47 AM
SweetPink Rough Rock Total Posts: 84 Last Post: 6/3/2005 Member Since: 2/3/2005	Would it be possible to wear too "guard bands" around a pear center stone??? Does anybody do that and have pictures?
Posted: 2/18/2005 8:41:47 AM

P: 2/18/2005 10:30:58 AM
sweetpinkshubby Rough Rock Total Posts: 38 Last Post: 4/16/2005 Member Since: 2/17/2005	i saw the topic i knew you'd be here
Posted: 2/18/2005 10:30:58 AM

P: 2/18/2005 10:33:48 AM
cflutist Ideal Rock Total Posts: 1,370 Last Post: 7/20/2006 Member Since: 7/12/2004	A warm welcome to sweetpink and sweetpinkshubby. Its nice to see another couple on PS. Cflutist+Websailor
Posted: 2/18/2005 10:33:48 AM

P: 2/18/2005 10:38:38 AM
SweetPink Rough Rock Total Posts: 84 Last Post: 6/3/2005 Member Since: 2/3/2005	Thanks,CFlutist. Reading all of you and Websailor's great posts made me want to post too Very Funny Hubby...you know why I am looking at pears and asking that question don't you??
Posted: 2/18/2005 10:38:38 AM

P: 2/18/2005 12:37:12 PM
sweetpinkshubby Rough Rock Total Posts: 38 Last Post: 4/16/2005 Member Since: 2/17/2005	thank you cflutist as you can see i'm being sucked into my wife's ps vortex and baby i could get you a pear from the produce section would that do?
Posted: 2/18/2005 12:37:12 PM

P: 2/18/2005 1:20:01 PM
SweetPink Rough Rock Total Posts: 84 Last Post: 6/3/2005 Member Since: 2/3/2005	I didn't know they sold diamonds in the supermarket
Posted: 2/18/2005 1:20:01 PM

P: 2/18/2005 1:41:31 PM
sweetpinkshubby Rough Rock Total Posts: 38 Last Post: 4/16/2005 Member Since: 2/17/2005	oh you meant diamonds
Posted: 2/18/2005 1:41:31 PM

P: 2/18/2005 2:30:05 PM
JCJD Ideal Rock Total Posts: 1,977 Last Post: 5/8/2007 Member Since: 9/8/2004	Hey now!! Keep that lovey dovey talk to yourselves!! LOLOLOLOL!!!!! More talk about DIAMONDS!!!!! Just kidding - you two are too cute!!!!!
Posted: 2/18/2005 2:30:05 PM

P: 2/18/2005 3:06:09 PM
SweetPink Rough Rock Total Posts: 84 Last Post: 6/3/2005 Member Since: 2/3/2005	This is my ring...I am looking to change the center stone to a slightly bigger pear.I like the look of my guard bands....do you think this would work? I don't see alot of pear shaped rings with guard bands. Does any body know of settings that sit slightly higher up...so the bottom of the pear would not scrape the diamonds on the guard band?
Posted: 2/18/2005 3:06:09 PM

P: 2/18/2005 3:14:24 PM
JCJD Ideal Rock Total Posts: 1,977 Last Post: 5/8/2007 Member Since: 9/8/2004	I think you could definitely set a pear high enough on your ering that your w-guard wouldn't touch it. Cflutist's pear (scroll up) is set higher than her wring, for example. It looks like the jeweler would just have to replace your existing center stone basket with one for a pear, which would have your pear sitting above your guard. Bring in your ideas and concerns to a jeweler and see what they say. I'm looking forward to what you decide to do! I'd love to see a pear in your setting!! (Sorry sweetpinkshubby!!!)
Posted: 2/18/2005 3:14:24 PM

P: 2/18/2005 3:33:28 PM
SweetPink Rough Rock Total Posts: 84 Last Post: 6/3/2005 Member Since: 2/3/2005	Actually...CFlutist has the type of "accomodating" prongs I am looking for...I think...can you give me a close up of the stone sitting on the prongs if possible. Thank you
Posted: 2/18/2005 3:33:28 PM

P: 2/18/2005 3:35:50 PM
cflutist Ideal Rock Total Posts: 1,370 Last Post: 7/20/2006 Member Since: 7/12/2004	Yes, that should work. I am not sure of the technical name for my style of head (think it is called a "peg" mounting), but I know it is not of the basket style. I have never cared for basket style heads because they make the stone difficult to clean from the pavillion. With mine, the stone is fully accessible for cleaning with a toothbrush and dishwashing liquid plus it allows you to wear a w-ring next to it. There is another close-up picture of the head here
Posted: 2/18/2005 3:35:50 PM

P: 2/18/2005 4:27:44 PM
SweetPink Rough Rock Total Posts: 84 Last Post: 6/3/2005 Member Since: 2/3/2005	That's exaclty what I am thinking of. I am going today to look at some stones and discuss these concerns with my jeweler. Thanks for the link,Cflutist.. and the inspiration. jcjd
Posted: 2/18/2005 4:27:44 PM

P: 2/18/2005 7:40:09 PM
cflutist Ideal Rock Total Posts: 1,370 Last Post: 7/20/2006 Member Since: 7/12/2004	Sweetpink, I found the head on my ring in the Stuller Findings Catalog - it is stock number 336 in a 13 x 8 mm size. Would have preferred the one in the next post but it was not available in my stone size (up to 12 x 8 mm only).
Posted: 2/18/2005 7:40:09 PM

Previous Page

Pages: 1 of 2: [1] 2 >

Next Page

Ť non-vday stones Ť

ť Whatie Flash Le, Photo Test. ť

Next Topics
Not a ring--does a diamond micropave bracelet count? wheee!!! my very own asscher e-ring!! Recommendation for a Jeweler in L.A. Who Will set a diamond? Pics of my rings Help finding a microset pear ring..... Wish Me Luck, I'm asking this weekend Moved--> Custom Ring: CAD vs. Handcrafted low budget CALLING ALL HUBBIES Post your Right Hand Ring photos here, please! Show me your e-ring + diamond eternity w-bands ... my grandmother's diamond Thank You to PS and W/F...Here's a pic.... Feelin' a little down... What do you think? My New 3 Stone Ring! Help on my pave ring - not having a good experience getting it made. Finally a poster! Right hand ring mount She said YES :) Diamond hoop earrings, anyone?? Eighternally A.Jaffe! etched shank question Do you recognize this picture? New Ritani Ring?? Where Can I find it? Center Stone Diameter : Ring Width Ratio QUESTION Tiffany Schlumberger Ring I AM HORRID!!! The Re-Set is Done! White Flash Does it Again! Whatie Flash Le, Photo Test. Here comes the rock!

Jump to:

Contact Us \| Back Home \| Privacy Statement \| Forum Agreement \| Forum Policies
Ideal BB Version: 0.1.5.4.beta1	Message forum software powered by the Ideal BB

Pricescope - Knowledge - Diamond Prices - Tools - Resources - About

Š 2000-2009 Pricescope. Terms of Use Privacy Policy Disclaimer
forum archives