|
|
|
|
| ||
Diamond Jewelry Forums
 Picture Gallery
 Video Gallery
 Journal
|
|||
|
|  Search
|  Posted Today
|  Most Active
|  Help
|
||
 »
Home
»  » Diamond Prices and Grading »
 » RockyTalky
»  » Need to Decide Between 2 By Tomorrow? Help!
|
|
 |
Need to Decide Between 2 By Tomorrow? Help! |
 |
| P: 9/23/2004 6:32:04 PM | |
nycneedshelp Rough Rock Total Posts: 5 Last Post: 9/23/2004 Member Since: 9/23/2004 |
I'd appreciate any and all help. I have to pick one out in the AM and this is what I came up with. Ring 1 Princess Cut 2.01 VS2 H Square Modified Brilliant 6.84 ' 6.78 ' 5.04 mm depth-74.3% table-77% Girdle- Extremely Thin to Thick Culet-None Polish - VG Symm - G Flor - None With Platinum band and tapered .35ct tw baguettes = 11,500 Ring 2 Princess Cut 1.86 F VS1 Depth 75 Table 69 Culet None Polish Good Sym Good Flor- None With Platinum ring and .35 ct tw tapered baguettes = $13,000 Any and all suggestions in terms of quality, good deal or whether or not the baguettes should be bigger would be greatly appreciated? Thanks |
| Posted: 9/23/2004 6:32:04 PM | |
|
There are 12 replies to this message. There are 12 replies on this page. |
|
| P: 9/23/2004 6:42:12 PM | |
reena Ideal Rock Total Posts: 2,531 Last Post: 8/22/2005 Member Since: 7/13/2004 |
i'm no expert on princesses but the extremely thin girdle on the princess makes me nervous. alexah/mmm, am i right?
do you have any further info on the second stone?
|
| Posted: 9/23/2004 6:42:12 PM | |
| P: 9/23/2004 6:43:51 PM | |
|
nycneedshelp Rough Rock Total Posts: 5 Last Post: 9/23/2004 Member Since: 9/23/2004 |
I have a GIA report on the 1st. The 2nd one said GRD-ETN-STK on the bottom. Is that what you mean? What would be the cause for concern regarding the girdle? Thanks for the input
|
| Posted: 9/23/2004 6:43:51 PM | |
| P: 9/23/2004 6:48:14 PM | |
|
reena Ideal Rock Total Posts: 2,531 Last Post: 8/22/2005 Member Since: 7/13/2004 |
yeah, i didn't see the girdle info or measurements for #2 is all. from what you wrote though looks like the second one has an extremely thin to slightly thick girdle--same issue. generally speaking EX thin girdles can chip, so that's the concern. i don't know specifically with respect to princesses, though. someone else will chime in don't worry.
i am in NYC too; where are you shopping?
|
| Posted: 9/23/2004 6:48:14 PM | |
| P: 9/23/2004 6:50:51 PM | |
|
nycneedshelp Rough Rock Total Posts: 5 Last Post: 9/23/2004 Member Since: 9/23/2004 |
A private dealer on fifth ave. reommended by a friend.
|
| Posted: 9/23/2004 6:50:51 PM | |
| P: 9/23/2004 7:06:54 PM | |
|
reena Ideal Rock Total Posts: 2,531 Last Post: 8/22/2005 Member Since: 7/13/2004 |
there are many princess experts around here so i'm sure someone will respond and help you out with those specs---however they're probably going to ask you what the crown height is. is it possible to have the dealer provide you with that information? do you have to make the decision tomorrow? have you shopped around at all?
|
| Posted: 9/23/2004 7:06:54 PM | |
| P: 9/23/2004 7:13:34 PM | |
lop Ideal Rock Total Posts: 2,651 Last Post: 9/7/2009 Member Since: 6/14/2003 |
I'm like Reena -- not a princess expert, but extremely thin girdles are at risk of chipping, so if you are going to consider one, make sure you know where and how much of the girdle is extremely thin, and if it can be protected by the setting. I think the second has better depth and table measurements -- the first is much more deep. Check out www.gemappraisers.com to see the various cut stats and how these fall for princess cuts. My take is that I would go withthe 2nd between these two, but those girdles worry me, and I would actually probably keep shopping. There are LOTS of sources for great princess cuts. maybe one of the princess experts will chime in here.
|
| Posted: 9/23/2004 7:13:34 PM | |
| P: 9/23/2004 7:13:41 PM | |
|
nycneedshelp Rough Rock Total Posts: 5 Last Post: 9/23/2004 Member Since: 9/23/2004 |
I've looked around a bit. I'm comfortable with this guy. Just trying to make as educated a decision as possible. I do have to finish the deal in the AM though. Didn't write down the measurements on the 2nd one though. Hopefully , I've provided enough info that someone can tell me what range of measurements would work.
|
| Posted: 9/23/2004 7:13:41 PM | |
| P: 9/23/2004 7:22:25 PM | |
|
reena Ideal Rock Total Posts: 2,531 Last Post: 8/22/2005 Member Since: 7/13/2004 |
ahhh! okay, SOS call out to the princess experts then.
not to be a pain in your a$$ but, in the event that you get negative feedback on these stones--and you might--are you sure you want to go ahead and buy tomorrow regardless? why make this big of a purchase without exhausting all of your options? you could still go through your guy, but maybe take some time to browse this board and learn about the specs for an outstanding princess cut. and then ask him to bring you some stones that meet those criteria.
i just think there's no sense paying a ton of money for a stone that may not have the right proportions, might chip or might look smaller than it should for its carat weight.
|
| Posted: 9/23/2004 7:22:25 PM | |
| P: 9/23/2004 7:22:45 PM | |
researcher Ideal Rock Total Posts: 2,440 Last Post: 5/26/2008 Member Since: 4/27/2004 |
Honestly, neither of them sound good to me. Do a search here for my posts, Moremoremore's posts, etc., and you'll find lots of information about choosing a princess cut stone. All I can say is these stones have too thin of girdles, and the depths are too high (the second one looks better than the first, but I still don't think it's sounding too good). What are the crown heights and pavilion angles on the stones?
|
| Posted: 9/23/2004 7:22:45 PM | |
| P: 9/23/2004 7:24:36 PM | |
|
nycneedshelp Rough Rock Total Posts: 5 Last Post: 9/23/2004 Member Since: 9/23/2004 |
I would certainly consider that. There are also other stones available. These 2 just happened to seem like an overall good mix of what I was looking for, but if someone makes a point that something should be changed, then I will consider somethin else he has. Thanks for your concern. I appreciate it.
|
| Posted: 9/23/2004 7:24:36 PM | |
| P: 9/23/2004 7:29:29 PM | |
|
reena Ideal Rock Total Posts: 2,531 Last Post: 8/22/2005 Member Since: 7/13/2004 |
 good boy! let the people here help you and you will end up with a fabulous stone that will knock your GF out!(in a good way)
if i were you i would start by taking lop's suggestion and checking out the cut grading charts of princesses at gemappraisers.com.
|
| Posted: 9/23/2004 7:29:29 PM | |
| P: 9/23/2004 8:20:19 PM | |
Todd07 Cut Rock Total Posts: 455 Last Post: 3/17/2005 Member Since: 8/17/2004 |
Since it's a private dealer, have a clear understanding of the return policy and spend the $ to get an independent appraisal
Todd(aka Ricardo, aka Cowboy) |
| Posted: 9/23/2004 8:20:19 PM | |
 Previous Page
|
Next Page 
|
Contact Us | Back Home | Privacy Statement | Forum Agreement | Forum Policies | |
| Ideal BB Version: 0.1.5.4.beta1 | Message forum software powered by the Ideal BB |
| |
Pricescope -
Knowledge -
Diamond Prices -
Tools -
Resources -
About
© 2000-2009 Pricescope. Terms of Use Privacy Policy Disclaimer
forum archives
