Whiteflash
 

Diamond Jewelry Forums   Picture Gallery   Video Gallery   Journal

   
 Search Posted Today Most Active Help   
 » Home »  » Diamond Prices and Grading »  » Show Me the Ring »  » how do you clean an eternity band?


  

 how do you clean an eternity band?

P:  9/21/2004 1:17:50 AM  
rachelle
rachelle

Rough Rock
Total Posts: 47
Last Post: 12/12/2005
Member Since: 9/18/2004
 
I would like to get all the crud out from behind the stones. any ideas?

 


Posted:  9/21/2004 1:17:50 AM

 There are 18 replies to this message.  There are 18 replies on this page.

P: 9/21/2004 10:30:59 AM
ame
ame

Ideal Rock
Total Posts: 3,452
Last Post: 2/7/2006
Member Since: 7/7/2004
 
Id get a jar of that Conessuires (I butchered that) cleaner and soak it in there and use that little brush that comes with it. Otherwise soak it in ammonia and water and use a really soft toothbrush (a baby one maybe) to get in all the crannies. I hear hot water helps too so maybe soak it in hot water for a bit to "dissolve" the funk.

Posted:  9/21/2004 10:30:59 AM
P: 9/21/2004 10:41:11 AM
cflutist
cflutist

Ideal Rock
Total Posts: 1,370
Last Post: 7/20/2006
Member Since: 7/12/2004
 
To clean my e-ring, I just use a soft toothbrush and dishwashing detergent.

But to clean my eternity band or tennis bracelets (where there are lots of nooks and crannies) I use an ultrasonic cleaner that I purchased from ottofrei.com. They sell equipment and findings to the trade but do sell an ultrasonic cleaner for home use for 69.95.

Posted:  9/21/2004 10:41:11 AM
P: 9/21/2004 10:58:46 AM
rachelle
rachelle

Rough Rock
Total Posts: 47
Last Post: 12/12/2005
Member Since: 9/18/2004
 
thank you for the suggestions. Is there an ultra sonic cleaner that works better then others?

Posted:  9/21/2004 10:58:46 AM
P: 9/21/2004 11:09:07 AM
cflutist
cflutist

Ideal Rock
Total Posts: 1,370
Last Post: 7/20/2006
Member Since: 7/12/2004
 
Can't say that one brand is better than another. However just make sure it is a true ultrasonic not one of those sonic machines normally sold to consumers. Ultrasonics are not to be confused with the so-called sonic cleaners that are actually no more than a vibrating shaking machine.

Posted:  9/21/2004 11:09:07 AM
P: 9/21/2004 12:27:56 PM
NewShiny
NewShiny

Cut Rock
Total Posts: 176
Last Post: 11/18/2009
Member Since: 1/9/2004
 
Cflutist,
Thanks for the tip! I just purchaed an ultrasonic cleaner from the site you recommended. I love the fact that its a mini version of the "professional" thing and cheaper than the Sharper Image machine!

Thanks again!
NewShiny

Posted:  9/21/2004 12:27:56 PM
P: 9/21/2004 1:42:02 PM
mrsfrk
mrsfrk

Ideal Rock
Total Posts: 648
Last Post: 10/17/2006
Member Since: 4/20/2004
 
Cleaning it frequently and not allowing too much gunk to build up is a good idea. I do the soak every night thing, in the AM I brush my teeth, brush my jewelry and then am ready to go.

If your ring in really gunked up, the woman who appraised my ring recommended cleaning the diamond via soaking in ammonnia and scrubbing, then soaking in very hot, almost boiling, but not quite, water. Allow it to sit and cool on its own. Once the water is room temperature, remove the diamond and give it another good scrub. I inherited a phenomenally gunked up ring, it looked like a different piece of jewelry after I was done with it.

Posted:  9/21/2004 1:42:02 PM
P: 9/21/2004 1:42:02 PM
yellowfan
yellowfan

Ideal Rock
Total Posts: 711
Last Post: 10/5/2005
Member Since: 9/10/2004
 
cflutist,
which model did you purchase from ottofrei.com? Also, any photos of your ring yet?



Lori

**************************** Adopt a pet and save a life.

Posted:  9/21/2004 1:42:02 PM
P: 9/21/2004 2:03:54 PM
cflutist
cflutist

Ideal Rock
Total Posts: 1,370
Last Post: 7/20/2006
Member Since: 7/12/2004
 
----------------
On 9/21/2004 1:42:02 PM yellowfan wrote:

cflutist,
which model did you purchase from ottofrei.com? Also, any photos of your ring yet?



Lori----------------



It was the ultrasonic for home use 69.95. Did you notice that you can also buy ones for $1200+? Stuller also sells them but I don't think they sell to the general public.

My sapphire is being reset as we speak. Got an email from Wink over the weekend. He was saying that the color was better than the pictures. I think he is more excited about this project than I am.

Posted:  9/21/2004 2:03:54 PM
P: 9/21/2004 2:16:38 PM
yellowfan
yellowfan

Ideal Rock
Total Posts: 711
Last Post: 10/5/2005
Member Since: 9/10/2004
 
cflutist,

Thats great about your ring! How exciting! What cleaner do you use in your ultrasonic? I'm going to order from ottofrei. The old one I have I paid over $100 and its a piece of junk! Keeps getting repaired for switch. I hope the new one is a lot better!



Lori

**************************** Adopt a pet and save a life.

Posted:  9/21/2004 2:16:38 PM
P: 9/21/2004 2:47:37 PM
cflutist
cflutist

Ideal Rock
Total Posts: 1,370
Last Post: 7/20/2006
Member Since: 7/12/2004
 
Any liquid soap will work or you can buy their ultrasonic cleaning solution which is really formulated to remove buffing compounds used during the manufacturing process.

Posted:  9/21/2004 2:47:37 PM
P: 9/21/2004 3:10:13 PM
nicstn
nicstn

Cut Rock
Total Posts: 101
Last Post: 6/6/2009
Member Since: 6/8/2004
 
This Ultrasonic the Branson b200 is awesome! it cleans better then any other method for hard to reach places. i use it on my e ring and the side stones are very hard to clean. the branson cleans them like new in 5 min or less. best thing i bought for my ring. Now be careful because some ultrasonics out there are not true ultrasonics meaning they do not have cavitation. To understand how an ultrasonic cleaner can perform cleaning or sonification, it helps to understand the principles of ultrasound and how they are applied in ultrasonic cleaning. Ultrasound is sound transmitted at frequencies beyond the range of human hearing. Ultrasonic energy generated by piezoelectric transducer at a rate of 40,000 times per second creates cavitation, the mechanism for ultrasonic cleaning. Cavitation" is the rapid formation and collapse of millions of tiny bubbles (or cavities) in a liquid. Cavitation is produced by the alternating high and low pressure waves generated by high frequency (ultrasonic) sound. During the low pressure phase, these bubbles grow from microscopic size until, during the high pressure phase, they are compressed and implode.

The cavitation is what will clean your hard to reach spots. Here is a link to the Branson B200.

https://hermesgr.securesites.com/cleanosonic/secureshop.cgi?cart_id=1857304.57454*Qy2Rq4&product=Branson_B200_Ultrasonic_Jewelry_Cleaner

I highly recommend it for complicated diamond jewlery pieces to clean.

Posted:  9/21/2004 3:10:13 PM
P: 9/24/2004 12:52:22 AM
Dancing Fire
Dancing Fire

Ideal Rock
Total Posts: 10,218
Last Post: 11/21/2009
Member Since: 4/3/2004
 
----------------
On 9/21/2004 1:17:50 AM rachelle wrote:

I would like to get all the crud out from behind the stones. any ideas?----------------


rachelle
i use a GemOro ultrasonic with heat to clean diamonds,i purchase a 2qt model ,too big for home use a pint size would be better.

it is always harder to find a "mind clean" stone than a eye clean stone.

Posted:  9/24/2004 12:52:22 AM
P: 10/4/2004 6:05:57 PM
yellowfan
yellowfan

Ideal Rock
Total Posts: 711
Last Post: 10/5/2005
Member Since: 9/10/2004
 
Rachelle,


I previously purchased GemOro. It had a faulty switch and I sent it back only to get another that worked for a week. I got a refund and purchased a Branson. I think either ottofrei or Branson would be a good choice. For quick touch ups, I ordered the cleaner at winkjones.com, it smells wonderful and does a good job. It came with a cloth and polishing cream too!


Lori

**************************** Adopt a pet and save a life.

Posted:  10/4/2004 6:05:57 PM
P: 10/4/2004 10:56:35 PM
Kamuelamom
Kamuelamom

Ideal Rock
Total Posts: 1,808
Last Post: 10/20/2006
Member Since: 4/18/2003
 
A great suggestion which I have used for nearly 2 years now is a battery operated toothbrush with an old head. Does the same thing as an old toothbrush, except the vibration adds a little "ultrasonic" effect without the added cost. Works for me everytime.


Edited to add: I use the conisseur brand too (I know I trashed that word) from Walmart, and when that runs low I add plain ammonia and dilute it with water.

Posted:  10/4/2004 10:56:35 PM
P: 10/4/2004 11:37:24 PM
rachelle
rachelle

Rough Rock
Total Posts: 47
Last Post: 12/12/2005
Member Since: 9/18/2004
 
thank you so much I will try the tooth brush. I have an old one I never use. Wow, I never would have thought of it!

Posted:  10/4/2004 11:37:24 PM
P: 10/5/2004 2:20:41 AM
yowahking
yowahking

Cut Rock
Total Posts: 317
Last Post: 11/13/2004
Member Since: 8/16/2004
 
I can tell you that for 15 years I decided not to sell any type of jewelry cleaner. Most of it is soapy water. We told customers many types of make it at home cleaning solution and ways to use tooth brushes. At the shop we have many types of cleaning machines, steamers, Ultrasonic, sonic, Ionic, and at our state convention I became very impressed with the owner of a new cleaning product line. It is now on my counter, in our shop cleaners, and our customers love the one designed for Rhodium and Platinum. He helped us figure out a Rhodium problem that we had with his CHem background and deserves all the success that he is having and now that I see him on PS, welcome Oliver. No I do not have any part of his company or get any free stuff for plugging him. Just happy when someone does something better than what is out there.

Scott Bohall
Owner, Treasures Custom Jewelers
President Arizona Jewelers Association

Posted:  10/5/2004 2:20:41 AM
P: 10/5/2004 8:08:23 PM
rachelle
rachelle

Rough Rock
Total Posts: 47
Last Post: 12/12/2005
Member Since: 9/18/2004
 
thank you for the warning I will remember it in the future. I would hate to loose one of my stones down the drain.

Posted:  10/5/2004 8:08:23 PM
P: 10/8/2004 12:04:03 AM
windowshopper
windowshopper

Ideal Rock
Total Posts: 2,023
Last Post: 7/25/2006
Member Since: 7/11/2004
 
a child's soft toothbrush soap and warm water

Posted:  10/8/2004 12:04:03 AM

 Previous Page Next Page 
« I have a ring to show! «» Just Engaged!!!!!! »
Next Topics
princess photos Side stones = too much goin' on? Better pics of my cushion!!! 9 pic collage of my regent. Speaking of side stones....can everyone post... Alternative to soldering? Rough Old Hands How many times/hour do you look at your ring? does this custom setting price sound right to you 7 stone anniversary band Thanks for everyone's help -- here's the ring ... wedding band to match e-ring Guess how many carat is this bling2 We are finally engaged :D I couldn't resist Handshots of my E-Ring The product of my search.. enough of the ring talk! Let's talk about boxes! :) Show me your curved/custom wedding bands made to fit e-ring! :) Help finding a setting I figured it out! My e-ring... a radiant engagement Taking pictures again Can a 1ct be put.... Finally after a 14+ month engagement we tied the knot . Wedding band with my tycoon e-ring Diamondholic My new ring Pics of my 3 stone beauty!!! Help about engraving?

Jump to:



Contact Us  |  Back Home  |  Privacy Statement  |  Forum Agreement  |  Forum Policies

Ideal BB Version: 0.1.5.4.beta1 Message forum software powered by  the Ideal BB

IdealBB Badge


Pricescope - Knowledge - Diamond Prices - Tools - Resources - About

© 2000-2009 Pricescope. Terms of Use Privacy Policy Disclaimer
forum archives