Diamond Jewelry Forums

Picture Gallery

Video Gallery

|

Search |

Posted Today |

Most Active |

Help

ť Home ť

ť Diamond Prices and Grading ť

ť RockyTalky ť

ť Can acetone be used for cleaning platinum erings?

Can acetone be used for cleaning platinum erings?

P: 6/2/2004 9:43:52 PM
squirerad Cut Rock Total Posts: 120 Last Post: 6/25/2004 Member Since: 4/5/2004	I know that many recommend using ammonia as a cleaning agent for jewelry, and it's cheaper than isopropyl alcohol, but it just plain stanks and has a slimy feeling to it. I was wondering if anyone has used acetone (aka nail polish remover) to clean their jewelry. From my college days, I remember that acetone is an excellent solvent and cleaning agent, but have never heard it being used to clean jewelry. squire "Our country is defined by the rights we protect, and those of us who fought for freedom and put our lives on the line defended the right of people to do things that we disagree with. I would not be pleased to see someone burning the flag because I love the flag, but the Constitution that I fought for preserves the right of free expression." ~John Kerry~
Posted: 6/2/2004 9:43:52 PM

There are 15 replies to this message. There are 15 replies on this page.

P: 6/2/2004 10:31:15 PM
Brian Knox Cut Rock Total Posts: 337 Last Post: 2/5/2005 Member Since: 3/26/2004	Hi, Acetone seems like overkill to me, I don't think it will hurt the platinum & diamond but it can't be too good for humans ( I think many solvents are absorbed thru the skin) Usually all you will need is a mild detergent, small brush and warm water. Also, most B&M's are glad to clean & check your ring. Brian Knox
Posted: 6/2/2004 10:31:15 PM

P: 6/2/2004 11:05:05 PM
just-ice Rough Rock Total Posts: 57 Last Post: 9/13/2007 Member Since: 4/24/2004	I use windex...cleans great and is not harsh... "The lack of planning on your part does not constitute an emergency on my part"
Posted: 6/2/2004 11:05:05 PM

P: 6/2/2004 11:16:08 PM
victorianblue Rough Rock Total Posts: 58 Last Post: 1/29/2005 Member Since: 5/7/2004	I would opt to find another method to clean your metal other than using Acetone. While acetone is not reactive to most metals, that does not mean that chemical could not cause undisireable changes in your metal. I work with acetone with my pottery restoration and always cover the pewter and silver lids with parafin wax to protect them. The properties of Acetone are potentially dangereous. For starts, it has a extremely low flashpoint--don't get this stuff anywhere near a pilot light or spark-poof goes your home!!! Additionally, acetone is easliy absorbed into the skin and mucous membranes. When working with acetone, one should wear protective clothing,gloves and yes a respirator---that is if you want to save your neuro and vital organs. I know this sounds rather melodramatic, but this stuff is nasty and can be lethal. Additionally, the nail polish removers have other ingrediants that I don't think have be tested or verified as safe for cleaning metals & jewelry. Pacificblueblaze
Posted: 6/2/2004 11:16:08 PM

P: 6/2/2004 11:35:17 PM
squirerad Cut Rock Total Posts: 120 Last Post: 6/25/2004 Member Since: 4/5/2004	Thanks for the replys. I guess I better stick with regular old soap and warm water. Didn't realize the potential harm of acetone and its volatile properties. squire "Our country is defined by the rights we protect, and those of us who fought for freedom and put our lives on the line defended the right of people to do things that we disagree with. I would not be pleased to see someone burning the flag because I love the flag, but the Constitution that I fought for preserves the right of free expression." ~John Kerry~
Posted: 6/2/2004 11:35:17 PM

P: 6/3/2004 12:46:58 AM
lop Ideal Rock Total Posts: 2,651 Last Post: 9/7/2009 Member Since: 6/14/2003	Wow...I was going to comment that acetone has eaten through pretty much every fabric it's ever touched in my house, so I would prefer to keep it away from my ears. However, it sounds as if I need to keep it away from my lungs and brain as well!
Posted: 6/3/2004 12:46:58 AM

P: 6/3/2004 3:21:13 AM
Garry H (Cut Nut) Ideal Rock Total Posts: 11,586 Last Post: 11/25/2009 Member Since: 8/16/2000	Acetone is used in the rhodium plating process for every white / yellow gold oiece of jewellery except pearls (because you can not put pearls in the acidic rP bath) Ammonia feels soapy slimy - that is good. If you want clean diamonds follow the directions in the engagement ring tutorial and suffer baby! Garry Holloway FGAA DipDT HCA and Ideal-scope developer http://www.ideal-scope.com and http://www.HollowayDiamonds.com.au
Posted: 6/3/2004 3:21:13 AM

P: 6/3/2004 5:41:17 PM
glitz&glam Rough Rock Total Posts: 44 Last Post: 9/13/2004 Member Since: 4/15/2004	Your first step should be to plug the drain!! Then you could try toothpaste and an old toothbrush. Or dishwashing detergent diluted in water. Rubbing alcohol straight also works. Sonic cleaners are also terrific.
Posted: 6/3/2004 5:41:17 PM

P: 6/3/2004 7:01:22 PM
JoangA Cut Rock Total Posts: 147 Last Post: 10/29/2009 Member Since: 5/16/2003	I've been using the mike steamer part of my Capresso coffee maker. It's just steam, of course I hold my ring or earrings with a pair of hemostats so as not to burn the fingers. I was going to return the machine until I discovered what a great cleaner it was. Now I make the coffee, then clean the ring. Very handy!
Posted: 6/3/2004 7:01:22 PM

P: 6/4/2004 11:38:12 AM
glitz&glam Rough Rock Total Posts: 44 Last Post: 9/13/2004 Member Since: 4/15/2004	That's wonderfully creative! Perk up yourself and then your diamond.
Posted: 6/4/2004 11:38:12 AM

P: 6/5/2004 1:23:52 AM
Garry H (Cut Nut) Ideal Rock Total Posts: 11,586 Last Post: 11/25/2009 Member Since: 8/16/2000	Steam is the best bet after ammonia and boiling water. tTooth paste is a no no - it leaves a white film. Alcohol must be pure and is usually not available - metho leaves a film. Garry Holloway FGAA DipDT HCA and Ideal-scope developer http://www.ideal-scope.com and http://www.HollowayDiamonds.com.au
Posted: 6/5/2004 1:23:52 AM

P: 7/20/2004 9:29:48 PM
jennifer1234 Rough Rock Total Posts: 3 Last Post: 7/20/2004 Member Since: 7/20/2004	Hi , i recently bought hagerty jewelry cleaner and wanted to get your opinion on how safe it is to use on a platinum and diamond engagement ring. the specific amount of ammonia is not listed, and i was wondering if i should dilute the solution before using. thanks, jen
Posted: 7/20/2004 9:29:48 PM

P: 7/20/2004 9:36:23 PM
wanderlost Cut Rock Total Posts: 124 Last Post: 9/15/2004 Member Since: 11/3/2003	I've been wondering for a while.... where can you buy an ultrasonic cleaner & what is the approximate cost? I understand that cleaning rings every night (in the u.sonic bath) will not harm them or cause a tension set to loosen.... is this true? thanks.
Posted: 7/20/2004 9:36:23 PM

P: 7/20/2004 9:39:57 PM
pearcrazy Ideal Rock Total Posts: 1,438 Last Post: 11/27/2008 Member Since: 5/16/2004	I have a Hagerty cleaner (I think) It's the one with the pink solution? The solution should be diluted 7 to 1 according to the directions. Works great. I use a soft toothbrush to clean around the small stones. You should see the crud floating in the solution when I'm done. Especially from my earrings. Hairspray, mousse etc really gunk them up. "Have you ever noticed, anyone going slower than you is an idiot, and anyone going faster than you is a maniac"--George Carlin
Posted: 7/20/2004 9:39:57 PM

P: 7/20/2004 9:41:50 PM
pearcrazy Ideal Rock Total Posts: 1,438 Last Post: 11/27/2008 Member Since: 5/16/2004	Wanderlost, my jewelry cleaner was 10 bucks at Wal-Mart. I don't use it every day. Maybe twice a month or so. "Have you ever noticed, anyone going slower than you is an idiot, and anyone going faster than you is a maniac"--George Carlin
Posted: 7/20/2004 9:41:50 PM

P: 7/20/2004 9:44:24 PM
pearcrazy Ideal Rock Total Posts: 1,438 Last Post: 11/27/2008 Member Since: 5/16/2004	I also work at a dental office with a top of the line commercial ultrasonic cleaner. Around 800 bucks. Can't tell a bit of difference in how clean my rings are from it and my el-cheapo Wal-Mart. "Have you ever noticed, anyone going slower than you is an idiot, and anyone going faster than you is a maniac"--George Carlin
Posted: 7/20/2004 9:44:24 PM

Previous Page

Next Page

Ť Newbie needs Expert Help with Emerald Cut Ť

ť SI1 F 3.39CT GIA CERT. ť

Next Topics
Help! Need opinions on custom ring. HCA vs. AGA vs. AGS Cushion Cut Depth/Table - need opinions Table Size - Help needed Ritani setting can it be made from white gold? ANOTHER clarity question for the experts: Sorry. Great Ring Experience - Recommended Jeweler Opinions on a diamond, please! Best place for 1.2-1.5 ct engagement ring Cartier and Mikimoto rings Sarin and HCA Hopefully my last post -- Help me chose between these 2 stones When buying smaller diamonds..... My Radiant E-Ring Opinions on these Asschers needed! Help!! Opinions on Princess. Last Minute!! Ring Size and Diamond Carat - Opinion needed Opionions PLEASE! Regent/Precison Set combo... Opinion on Diamond and Price Opinions on this diamond please? i don't think it's good advice to tell a first time buyer... I think for people that buys D-FL kind of stone... LightScope and Brilliance Feedback on this Diamond, Part II Need help about color!!! Which is Better? rapport report for asscher... Can you guys please give me your opinion on this diamond Update on my diamond Does this sound like a good deal for a princess cut? Opinions pls on my new diamond HCA and earrings

Jump to:

Contact Us \| Back Home \| Privacy Statement \| Forum Agreement \| Forum Policies
Ideal BB Version: 0.1.5.4.beta1	Message forum software powered by the Ideal BB

Pricescope - Knowledge - Diamond Prices - Tools - Resources - About

Š 2000-2009 Pricescope. Terms of Use Privacy Policy Disclaimer
forum archives