Diamond Jewelry Forums   Picture Gallery   Video Gallery   Journal

   
 Search Posted Today Most Active Help   
 » Home »  » Diamond Prices and Grading »  » RockyTalky »  » Desperately seeking the perfect Heart!


  

 Desperately seeking the perfect Heart!

P:  5/28/2004 11:34:50 AM  
luvn2oxfrd
luvn2oxfrd

Rough Rock
Total Posts: 43
Last Post: 12/18/2007
Member Since: 5/28/2004
 
Help!

My fiance and I are desperately seeking the perfect heart shaped diamond. A feat that is proving to be much more difficult than we had thought.

Larger heart shaped stones are just not in the stores and we have had 2 different jewelers bring in 5 stones, none of which matched our criteria. Are we asking too much, or is there no such thing as a perfect heart?

Of the 5 stones we have seen, this is the criteria we have pieced together. If we are off base with any of the numbers, please let me know!

Carat: 2.0 - 2.5
Color: F - H
Clarity: VS1 - VS2
Table: 52 - 60%
Depth: 52 - 60%
Length to Width Ratio: .95 - 1.1 (we prefer the elongated heart)

Is it out there? Is it a matter of waiting until the right stone comes along...or will be waiting forever?

Any advice or comments are welcome. We are getting quite frustrated in our search.
Posted:  5/28/2004 11:34:50 AM

 There are 10 replies to this message.  There are 10 replies on this page.

P: 5/28/2004 11:45:15 AM
moremoremore
moremoremore

Ideal Rock
Total Posts: 6,825
Last Post: 2/9/2009
Member Since: 3/15/2004
 
I know SQUAT about hearts...but here are a few that came up as "ideal" cuts...

http://www.dirtcheapdiamonds.com/diamond_detail.cfm?did=2016010

http://www.dirtcheapdiamonds.com/diamond_detail.cfm?did=2502635

http://www.dirtcheapdiamonds.com/diamond_detail.cfm?did=2501923

______________________________ Stewart says: I'm good enough. I'm smart enough. And doggon'it, people like me.

Posted:  5/28/2004 11:45:15 AM
P: 5/28/2004 11:47:25 AM
valeria101
valeria101

Ideal Rock
Total Posts: 14,048
Last Post: 4/30/2006
Member Since: 8/29/2003
 
Well... those numbers may be a bit strict (and 52 very low both for table and depth, as far as I woudl judge), but with no way to rely on these dimensions to determine how the stone will look like, it may be a good idea to inquire online as well. I suspect you will indeed have a wait a bit for a brilliant, well cut stone like this - asking it from a seller already selecting stones for brilliance would help, I suppose.

For an asimetrical shape like this, those percentages really do not say much. Just imagine what that 60% table would say and how many table outlines would give the same number! And depth down to the culet says little about how exactly is the stone cut - that is just the max depth for an otherwise intricate outline. There are a few dozen stones matching your criteria listed here, and I would hope a seller can help select one with both pleasing shape and good brilliance among them.

Anyway, I would take a look on the guidelines at Gemappraisers and teh Ideal_scope.com for what should be expected from the light return of a fancy shape. Have you tried these?

Just my 0.2, of course.



Ana "The greatest experts are only as good as the sum total of what they have seen." [Souren Melikian]

Posted:  5/28/2004 11:47:25 AM
P: 5/28/2004 11:51:56 AM
valeria101
valeria101

Ideal Rock
Total Posts: 14,048
Last Post: 4/30/2006
Member Since: 8/29/2003
 
Oh... sure. DCD defines a set of proportions to be "ideal cut" for each shape. And they do provide soem analysis of brilliance for their rounds.. so why not for a hart shape? Same at Whiteflash... and most sellers posting here.

Actually, if you just select a few stones for their specs on teh Pricescope site itself, chances are each piece would be listed by a couple of sellers, so once you have an idea what 1-2 pieces sound promissing, you can ask one of the sellers to call in the piece for a better look. And you can always post a couple of options here for public scrutiny - the PS way


Ana "The greatest experts are only as good as the sum total of what they have seen." [Souren Melikian]

Posted:  5/28/2004 11:51:56 AM
P: 5/28/2004 12:02:23 PM
moremoremore
moremoremore

Ideal Rock
Total Posts: 6,825
Last Post: 2/9/2009
Member Since: 3/15/2004
 
that's why I listed the word ideal in " "

______________________________ Stewart says: I'm good enough. I'm smart enough. And doggon'it, people like me.

Posted:  5/28/2004 12:02:23 PM
P: 5/28/2004 12:04:44 PM
valeria101
valeria101

Ideal Rock
Total Posts: 14,048
Last Post: 4/30/2006
Member Since: 8/29/2003
 
Hope this makes one "case in point"... obvioulsy there are three stones listed here by a couple sellers each! The table shows what AGA considers good proportions for a hart shape (the criteria for these proportions are explained both on the tutorial for Fancy Shapes here and on Gemappraisers.com). While not all details are listed (or would be present on a GIA cert) to give an AGA grade to eitehr stone, they seem good contenders (with no "number" out of line, that is).



 

 

Ana "The greatest experts are only as good as the sum total of what they have seen." [Souren Melikian]

Posted:  5/28/2004 12:04:44 PM
P: 5/28/2004 12:11:23 PM
valeria101
valeria101

Ideal Rock
Total Posts: 14,048
Last Post: 4/30/2006
Member Since: 8/29/2003
 
This is the last one, really!

I was just wandering which would be an "elongated" hart shape for you between the two below? For two altogether different reasons both would be called "narrow" by some


 

 

Ana "The greatest experts are only as good as the sum total of what they have seen." [Souren Melikian]

Posted:  5/28/2004 12:11:23 PM
P: 5/28/2004 12:20:19 PM
valeria101
valeria101

Ideal Rock
Total Posts: 14,048
Last Post: 4/30/2006
Member Since: 8/29/2003
 
Did I say 'last post' ? Hm...

Both these have about the same depth and 60% tables. They look like night and day to me, despite the look-alike depth and table! This is about how mcuh numbers can help here. And I didn't even touch the topic of brilliance - no numbers would guarantee much in that department!

 

 

Ana "The greatest experts are only as good as the sum total of what they have seen." [Souren Melikian]

Posted:  5/28/2004 12:20:19 PM
P: 5/28/2004 12:36:36 PM
luvn2oxfrd
luvn2oxfrd

Rough Rock
Total Posts: 43
Last Post: 12/18/2007
Member Since: 5/28/2004
 
wow! valeria101, i am impressed. the two jewelers we have seen in our area have not jumped to help as quickly as you have! thank you very much.

as for the elongation issue, we would prefer the stone on the right...the one with a negative bulge factor, i am presuming. but if finding an elongated stone is difficult, finding one with less of a bulge is impossible.

we have been warned that if we want an elongated heart, that we should drop the clarity to SI1/SI2 because an elongated heart is generally a flawed pear with a notch. we would prefer not to do this however.





Posted:  5/28/2004 12:36:36 PM
P: 5/28/2004 12:44:16 PM
valeria101
valeria101

Ideal Rock
Total Posts: 14,048
Last Post: 4/30/2006
Member Since: 8/29/2003
 
Isn't the diamond at the left in the pic close to having "negative bulge factor" ? (btw. in the wireframe pic the stone to the right has a square outline 1:1 proportions, and the one at the left comes at 1.1:1 ! Both stones pictured are between 1:1 and 1.1:1).

Sometimes I hear saying that the "notch" on a hart shape is one way to cut a large inclusion out of the stone (hence the comment of SI starts to make sense) but I woudl think any shape can be found in any clarity, given enough choice. Actually, I would definitely consider a clean SI, with no other argument involved: if one cannot see those inclusions once the stone is set... why not?

Ana "The greatest experts are only as good as the sum total of what they have seen." [Souren Melikian]

Posted:  5/28/2004 12:44:16 PM
P: 5/28/2004 12:45:11 PM
luvn2oxfrd
luvn2oxfrd

Rough Rock
Total Posts: 43
Last Post: 12/18/2007
Member Since: 5/28/2004
 
you are right, i do clearly see the differences in the two stones. but what to do? i understand that numbers don't tell you anything, and that you need to see the stones, but that in and of itself is very difficult. i have never seen more than 2 heart stones together at one time, and those two stones varied so greatly in the numbers that you couldn't make a good comparison.

Posted:  5/28/2004 12:45:11 PM

 Previous Page Next Page 
« Is this diamond a dud? «» Standard (usual?) diameters? »
Next Topics
Opinions on this ring I need to decide b/w these two Diamonds today!!! Suggestions? Comments on this Princess Cut What do your prongs look like - up REAAAALLY close?! Need help with an Asscher Wedding band Looking for round 2k colourless and clean to my eye.. Where to start Opinions on this Princess?? Gemprint services - Peace of mind Upgrade To 3 Stone Ring Pt. 2 need suggestion for a gent's setting.. diamond for my tension ring Trade Offs Synthetics will drive down the price of diamonds (NOT) Are fancy shape diamonds less expensive than rounds? Spend Someone Else's Money Jubilee, Queen of Hearts, Regent??? i need help on 2 different princess cuts!? difference between a jubilee and a lucida???? My First Post: We want to buy a ring but.... Opinions on this diamond? We're heading to Jewler Row, Philly Which diamond - HELP!!! when BlueNile says 'Cut' help for 2 more princess cuts, great feedback from the last one going fancy is this the ideal table and depth?? Have $6,000. What can i get for that? Gridle feedback on this diamond what is the difference between gemmologist and appraiser? Seeking advice on choosing between 2 diamonds

Jump to:



Contact Us  |  Back Home  |  Privacy Statement  |  Forum Agreement  |  Forum Policies

Ideal BB Version: 0.1.5.4.beta1 Message forum software powered by  the Ideal BB

IdealBB Badge


Pricescope - Knowledge - Diamond Prices - Tools - Resources - About

© 2000-2009 Pricescope. Terms of Use Privacy Policy Disclaimer
forum archives