Fine Line Platinum Solitaire by Le

Hi rosy!

The ring measures 1.9mm at the top, 2.6mm in the middle and 2.8mm at the bottom.

LesleyH

www.whiteflash.com

What about the six prong solitaire tiffany setting?

Hi daisydeadpetals

We have 3 different items that fit this description - which one are you referring to?

 

LesleyH

www.whiteflash.com

The platinum 6 prong tiffany style that sells for $350.

Thanks.

Date: 11/11/2004 512 AM
Author: LesleyH

Hi rosy!

The ring measures 1.9mm at the top, 2.6mm in the middle and 2.8mm at the bottom.

LesleyH

www.whiteflash.com

Hi Lesley,

Thanks for the info.  Would you also have the measurements for the Platinum Sleek Lines Solitaire?

Thanks!

In the past whenever I wanted to know mm sizing of rings (which WF should put on their site!!), I just emailed Lesley and asked. Or a quickie phone call should also get you the answer quite quickly! I know WF does not always read the site on a daily basis depending on their workload.

I completely agree with you, Mara! WF should put the mm info for the settings on their page--that''s a great idea!

Hi Mara and Researcher:

Point taken I will get someone on it tomorrow. I did a quick search and found that the measurements have been entered on some of the settings (example: https://www.whiteflash.com/golden-wardrobe/Gold_Details.aspx?ItemCode=PL0701), so we'll work on filling in the blanks for those that don't.

LesleyH

www.whiteflash.com

You didn''t ask, but I have the Fine Line Solitaire and I like it a lot. Good luck with your decision!

Hi sxn,

I am interested in the fine line setting that you have with a stone around 1 ct as well. I saw the pictures of your ring posted on a previous thread. I have picked out a wedding band in the exact same style as yours! What a coincidence (we share the same great tastes). I was hoping that you can tell me how high the diamond sits above your finger (from table to inside edge of ring). I have a size 3 finger and am looking for something that will sit low. Do you consider the fine line to be a low setting compared to average?
Thanks

How low does the diamond sit on this setting?

Hi guys:

The diamond can be set higher or lower in this setting. What you need to remember is that you have to take the depth measurement of the diamond into account. It can be set as low as the depth plus a couple of mm.

LesleyH
www.whiteflash.com